LCD Screen and Digitizer Full Assembly for Huami Amazfit GTR 2 A1951, For Huami Amazfit GTR 2

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Huami Amazfit GTR 2 A1951
2. Replace the old, broken, cracked, damaged
3. Make your device cooler than ever
4. Fit completely and works
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
before installation notes
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to sand yourself an ESD (electronic static discharge) strap. This will prevent static electricity from damaging the electronic components inside the watch.
Be sure to wear eye protection and use caution not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. We strongly suggest testing before installation. Simulate testing, which means watch apart (motherboard + LCD or screen) connected audio cable and new replacement, power on, testing finished. If test OK, please install it. If it can't show, please contact us at the first time. And please don't force it to be installed in watch. We won't be responsible once the screen is installed.
Tips 3: Don't overwire
Make sure the LCD cable is not too much. More than 90 degrees bent will cause a black display.