LCD Screen and Digitizer Full Assembly with Frame for Honor Magic Watch 2 MNS-B19 46mm, For Honor Magic Watch 2 46mm

1. Replacement LCD Screen + Touch Screen Digitizer Assembly (with Frame) for Honor Magic Watch 2 MNS-B19 46mm
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your device.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is ok, please install it. If it can't display, please contact us for the first time. And please don't force it to install in your device. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.