For Asus Rog Ally LCD Screen with Digitizer Full Assembly

Before installation notes
Tips 1: Test before installation
When testing, do not remove any protective film or labels. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your device.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product.We strongly recommend testing before installation.Simulate testing, which means separate device, connect audio cable (motherboard + LCD or screen) and new replacement, power on, test finished.If the test is OK, install it.If it can't display, contact us at the first time.And please don't force it to install into your device.We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. LCD display + touch screen digitizer assembly replacement part.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.