For Google Pixel 6 GB7N6 G9S9B16 G9S9B TFT LCD Screen Digitizer Full Assembly, Not Support Fingerprint Identification, For Google Pixel 6(TFT)

Notes before installation
Tips 1: Test before installation
During testing, do not remove any protective films or labels. Pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, that is, disassemble the mobile phone (motherboard + LCD or screen), connect the audio cable and the new replacement, power on, test finished. If the test is OK, install it. If you can't see, contact us at the first time. And please do not force the installation into the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable does not bend excessively. Over 90 degrees of bending will cause black display.
Product information
1. LCD Display + Touch Screen Digitizer Assembly Replacement
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully suitable and functional
5. Each item has been checked and is in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: No fingerprint identification