For Apple Watch Series 10 42mm LCD Screen and Digitizer Full Assembly, For Apple Watch Series 10 42mm

Notes before installation
Tips 1: Test before installation
During testing, do not remove any protective films or labels. Pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, that is, disassemble the mobile phone (motherboard + LCD or screen), connect the audio cable and the new replacement, power on, test finished. If the test is successful, please install it. If you can't see, please contact us at the first time. And please do not force the installation into the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable does not bend excessively. Over 90 degrees of bending will cause black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Apple Watch Series 10 42mm
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully suitable and functional
5. Each item has been checked and is in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed