JK In-cell TFT LCD Screen for iPhone 12 Pro Max with Digitizer Full Assembly, For iPhone 12 Pro Max(JK inell)

LCD Screen Features
Specifications:
1. Display Type: INCELL FHD
2. Resolution: 1284 x 2778
3. Color temperature (k): 6700
4. Brightness (cd/m2): 620
5. Removable IC: NO
6. True Tone: YES
Characteristics:
1. 120Hz touch control
2. Original color display
3. High wear resistance
4. Wide color gamut display
5. Low energy consumption
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for iPhone 12 Pro Max
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully suitable and functional
5. Each item has been checked and is in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
During testing, do not remove any protective films or labels. Pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product.We strongly recommend testing before installation.Please simulate testing, that is, disassemble the mobile phone (motherboard + LCD or screen), connect the audio cable and the new replacement, power on, testing finished.If the test is OK, please install it.If it does not display, please contact us at the first time.And please do not force installation into the mobile phone.We will not be responsible once the screen is installed.
Tips 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.