Socket programmatore QFN44-0.5 per chip QFN44 IC

Socket programmatore progettato per testare, leggere e scrivere su chip integrati QFN44 con passo 0,5 mm. Utilizzato in circuiti integrati per operazioni di programmazione e verifica.

• Numero di core: 44
• Contatti a forma di U per maggiore stabilità
• Materiale contatti: schegge di rame al berillio
• Materiale isolante: PPS / PET
• Dimensioni chip supportate: 7x7 cm
• Dimensioni socket: 15x12x6 cm

Sedile programmazione QFP48 0,5 mm per chip IC

Questo sedile è utilizzato per la programmazione e il test di chip con pacchetto QFP48, ideale per applicazioni di presa di programmazione e prova.

• Compatibile con chip QFP48, PQFP48 con passo pin di 0,5 mm
• Estrae tutti i pin in ordine secondo il chip
• Posizione dei pin: 48
• Dimensioni chip supportate: 7x7 mm (con pin 9x9 mm)
• Dimensioni prodotto: 13 cm x 10 cm x 5 cm
• Peso: 70 grammi

Scheda programmazione QFN32-0.5 doppio strato 8x8 cm

Questa scheda a doppio strato è progettata per la programmazione e il test di chip integrati QFN32 con passo 0,5 mm. È dotata di contatti in rame al berillio e materiale isolante PPS PET per garantire precisione e affidabilità nelle operazioni di programmazione.

• Compatibile con chip QFN32 IC con dimensioni 5x5 cm
• Passo tra i pin di 0,5 mm per connessioni precise
• Materiale di contatto: schegge di rame al berillio
• Materiale isolante: PPS PET
• Dimensioni scheda: 8 cm x 8 cm x 2 cm
• Utilizzo: programmazione e test di circuiti integrati

Server seriale industriale Waveshare RS232 a RJ45 Ethernet

Dispositivo per la trasmissione dati bidirezionale tra una porta seriale RS232 e una rete Ethernet tramite connettore RJ45. Supporta protocolli TCP/IP e offre diverse modalità operative per la comunicazione industriale.

• Interfacce: 1 porta RS232, 1 porta Ethernet RJ45 con negoziazione automatica 10/100M
• Alimentazione: 6-36 V DC
• Supporta standard PoE IEEE 802.3af e protezione da sovratensione 2KV
• Velocità di trasmissione seriale da 300 a 115200 bps
• Modalità operative: server TCP, client TCP, UDP e UDP multicast
• Dimensioni compatte: 87x36x59 mm, peso 0,14 kg

Server seriale industriale Waveshare RS232 a Ethernet

Dispositivo per la trasmissione dati bidirezionale tra porta seriale RS232 e rete Ethernet tramite protocollo TCP/IP. Ideale per applicazioni industriali che richiedono la conversione e gestione di segnali seriali su rete Ethernet.

• Interfacce: 1 porta RS232, 1 porta Ethernet RJ45
• Alimentazione: 6-36 V CC
• Supporta PoE secondo standard IEEE 802.3af
• Velocità trasmissione dati: 300-115200 bps
• Configurazione via host, browser web e libreria funzioni
• Dimensioni compatte: 13x7x9 cm, peso 0,12 kg

Obiettivo M12 12MP per modulo fotocamera Raspberry Pi

Obiettivo di ricambio ad alta risoluzione progettato per moduli fotocamera Raspberry Pi con attacco M12. Offre immagini nitide grazie alla risoluzione di 12 milioni di pixel e un ampio campo visivo.

• Risoluzione: 12 megapixel
• Lunghezza focale: 2,7 mm
• Apertura: F/2.8
• Campo visivo (FOV): 113 gradi
• Montaggio: filettatura M12 x P0.5
• Temperatura di lavoro: da -30 a 70 °C

Modulo CAN Bus per Raspberry Pi Pico con comunicazione SPI

Modulo CAN Bus progettato per Raspberry Pi Pico e dispositivi compatibili, consente comunicazioni a lungo raggio affidabili tramite interfaccia SPI.

• Compatibile con Raspberry Pi Pico e dispositivi con intestazione standard Pico
• Controller CAN MCP2515 integrato
• Ricetrasmettitore SIT65HVD230DR per comunicazione CAN
• Bus di comunicazione SPI con velocità da 5K a 1000Kbps
• Tensione di funzionamento da 3,3 V a 5 V
• Dimensioni compatte: 52 x 21 mm

Display LCD touch capacitivo IPS 3,5" 480x800 HDMI

Display LCD da 3,5 pollici con tecnologia IPS e touch capacitivo a 5 punti, progettato per l'uso con Raspberry Pi e altri sistemi operativi senza necessità di driver aggiuntivi.

• Risoluzione hardware 480 x 800 pixel
• Touchscreen capacitivo a 5 punti con tecnologia di laminazione ottica
• Angolo di visione ampio di 170 gradi
• Interfaccia HDMI per il segnale video
• Interfaccia USB di tipo C per il touch
• Compatibile con Raspberry Pi, Ubuntu, Kali, Windows 10 IoT e Retropie
• Dimensioni: 88,87 x 52,56 mm; peso: 0,159 kg
• Include adattatore da HDMI a Micro HDMI

Modulo scanner codici 2D Waveshare USB e UART

Modulo per la scansione rapida e precisa di codici a barre 1D e 2D, incluso codici ad alta densità da 4mil. Ideale per lettura su carta o schermo tramite algoritmo di riconoscimento immagini.

• Supporta più formati di codici a barre 1D e 2D
• Scansione codici ad alta densità da 4mil
• Interfacce integrate USB (modalità tastiera e porta virtuale) e UART
• Risoluzione immagine 640 x 480 pixel
• Angolo di scansione: inclinazione +/-65°, rollio 360°
• Sorgente luminosa bianca per illuminazione e rossa per puntamento

Waveshare 24019 UGV cingolato fuoristrada espandibile

Robot cingolato progettato per applicazioni fuoristrada con sistema di sospensione indipendente e controllo remoto via WIFI. Include un computer slave ESP32 integrato per gestione e controllo avanzato.

• Dimensioni: 231x197x151 mm, peso 2 kg
• Sistema di sospensione 4×2 indipendente in acciaio inox da 1,5 mm
• Corpo in lega di alluminio 5052 da 2 mm
• Velocità di marcia da 0,25 a 1 m/s con raggio di sterzata minimo di 0 metri
• Capacità di arrampicata fino a 36 gradi e superamento ostacoli verticali di 40 mm
• Alimentazione con 3 batterie al litio 18650 (non incluse), autonomia circa 1 ora
• Motori da 5,2 W ciascuno con encoder integrato

Pannello matrice LED RGB flessibile 96x48 pixel 2,5 mm

Questo pannello a matrice LED a colori RGB è flessibile e dispone di 4608 LED indipendenti con passo di 2,5 mm. È adatto per visualizzare testi, immagini e animazioni a colori su superfici curve o piane.

• Risoluzione: 96x48 pixel (4608 LED RGB)
• Passo pixel: 2,5 mm con formato 1R1G1B
• PCB flessibile e pieghevole, adatto a superfici curve come cilindri o sfere
• Alimentazione: 5 V / 2,5 A con potenza entro 20 W
• Angolo di visione superiore a 140 gradi
• Due connettori HUB75 per ingresso e uscita dati, supporta catena di pannelli

Pannello matrice LED RGB 64x32 pixel passo 2,5 mm

Pannello a matrice LED a colori RGB con 2048 punti, ideale per visualizzare testo, immagini o animazioni a colori. Dispone di luminosità regolabile e connettore HUB75 per controllo sincrono.

• Risoluzione: 64 x 32 pixel (2048 LED RGB indipendenti)
• Passo pixel: 2,5 mm con formato 1R1G1B
• Angolo di visione superiore a 140 gradi
• Modalità di controllo sincrona con scansione 1/16
• Connettore HUB75 con ingresso e uscita per catena
• Dimensioni compatte: 16 x 8 cm, potenza entro 12 W

Modulo Bluetooth WiFi TTGO TS V1.4 ESP32 con MPU9250

Modulo di sviluppo basato su chipset Espressif ESP32 con connettività Bluetooth e WiFi integrata, dotato di sensore MPU9250 e slot per scheda SD. Adatto per progetti di elettronica, IoT e applicazioni embedded.

• Microprocessore dual-core Xtensa LX6 a 32 bit con frequenza fino a 240 MHz
• Memoria Flash QSPI e SRAM fino a 4 x 16 MB, 520 KB SRAM interna
• Interfacce multiple: UART, SPI, SDIO, I2C, PWM, I2S, IRGPIO, ADC
• Include sensore di movimento MPU9250 e slot per scheda SD
• Alimentazione tramite USB 5V / 1A, tensione operativa 2.3V-3.6V
• Compatibile con protocolli WiFi 802.11 b/g/n fino a 100 Mbps

Features B>
1. This is a RS485 data acquisition gateway device designed for industrial environment.
2. Combine multiple functions into one, including serial server, Modbus gateway, MQTT gateway, RS485 to JSON, etc.
3. The module has RS485 and Ethernet ports, uses screw terminals for power input, supports 9~24V wide power supply.
4. Rail mounting fire box design, small size, easy to install.
5. It is suitable for applications such as data acquisition, IOT gateway, IoT security and safety, and intelligent instrument monitoring...
Specifications B>
1. Communication interface: RS485, screw terminal, support 32x slave devices
2. Power supply: 9 ~ 24V DC, screw terminal
3. Dimensions (lxwxh): 87 x 36 x 59 mm
4. Ethernet: RJ45 connector Auto-Negotiation 10/100m, 2kV protection
5. Serial Port: RS485 ?? 1: RXD, TXD, GND
6. Baud rate: 300 ~ 115200 BP
7. Bit Parity: none, odd, even, mark, space
8. Data Bit: 5 ~ 9 bits
9. Flow Control: N/A
10. Protocol: Ethernet, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS
11. Configuration: Host, Web Browser, Device Management Library
12. Communication method: TCP/IP direct communication, VCOM
13. Operation mode: TCP server, TCP client (coexisting with TCP server), UDP, UDP Multicast
14. Operating temperature: -40 degrees c ~ 85 degrees c
15. Storage temperature: -45 degree c ~ 165Degree c
16. Humidity range: 5% ~ 95% RH

1. The input is a switch signal. When the input port is shorted to ground (GND), an alarm message will be sent to the preset alarm phone or call the set alarm number. The content of the alarm message can be set by yourself
2. It is simple and convenient to use, can be well integrated into other equipment, and acts as a remote alarm working system
3. The alarm content of 1 alarm input and the alarm content when it is restored to normal can be defined by yourself
4. Built-in rechargeable lithium battery, usually in a charging state, when the main power is off, it will provide power and send an alarm message to the preset number
5. Power supply: DC 5V-15V

1. Low power sleep mode design
2. Unidirectional alarm voltage output
3. It can detect battery voltage in real time and create low battery voltage alarm, suitable for battery applications and wide voltage power supply range from DC5V to DC16V
4. Eight-way alarm detection, users can set different contents for each alarm SMS,
The input port can be selected as NC or no alarm mode
5. 6 groups of dialed numbers can be set. When the alarm input has a trigger signal, an alarm message will be sent to the alarm number or an alarm will be called directly
6. Easy to use, support IOS and Android apps, you can simply send text messages through the app to set up
7. Wide application fields: Mainly home security, warehouses, unattended remote stations, remote monitoring of equipment parameters (such as oil pressure, air pressure, water pressure, voltage, etc.), product upgrades (voltage monitoring, overload monitoring, etc.), security protection (smoke, fire, water level monitoring, gas, etc.) Other unattended points
8. Size: 8 x 5.8 x 2.2 cm

1. Power supply: 9-24V
2. Communication interface: RS485 port x 1, Ethernet port x 1
3. Transmission speed: 300-115200 bps
4. Data bits: 5-9 bits
5. Configuration: Host, Web Browser, Device Management Function Library
6. Communication method: TCP/IP direct communication, VCOM
7. Working temperature: -40 degrees to 85 degrees
8. Main function: Bidirectional transparent data transmission between RS485 and Ethernet
9. Easy to combine serial servers installed on multiple binaries together, more freedom.
10. It is suitable for Modbus network upgrade and can be used together with 3D configuration software.
11. Support TCP server/TCP client/UDP mode/UDP multicast.
12. Support multi-host polling, easy for cloud communication and device identification.

1. Based on Qualcomm platform, supports 5G NSA and SA networks, supports multi-mode and multi-band
2. Multi-constellation dual-band positioning: GPS, Beidou, Glonass, Galileo and QZSS
3. OS Support: Windows/Linux/Android
4. USB 3.1 port (compatible with USB 2.0) for connecting to PC, Raspberry Pi or Jetson Nano host board to enable high-speed 5G communication
5. Standard M.2 B KEY slot, compatible with various 5G modules: SIM8202X-M2 / SIM8200EA-M2 / SIM8262X-M2 series
6. Built-in UART, PWR and RST control pins, built-in voltage level translator, enabled via DIP switch, for use with hosts such as Raspberry Pi or Arduino
7. Built-in USB-C connector, enabled by switch, for connecting autonomous power supply for the module, enables multiple loads, stable and flexible power supply
8. Built-in power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the working status
9. 4 SMA to IPEX antenna connectors, with pre-soldered SMA terminals for connecting antennas
10. 2 SIM card slots, single standby for dual card, switchable by AT command
11. Built-in audio jack and audio decoder, enables audio operation such as making a phone call
12. High efficiency power circuit, output current up to 3A

1. CM4 socket: for all variants of the Compute Module 4
2. Network: RJ45 Gigabit Ethernet connector
3. Connector: M.2 M KEY, support communication module or NVME SSD
4. USB: USB 2.0 Type A × Type 2
5. Display: LCD port
6. Camera: MIPI CSI-2×2 camera port
7. Video: HDMI port, support 4K 30fps output
8. Fan Header: Allows speed adjustment, 5V
9. Power input: 5V

1. Working voltage: 3.3V/5V
2. Interface: 3-wire SPI, 4-wire SPI
3. Grayscale: 2
4. Full update time: 321
5. Refresh power: about 57mW
6. Dot pitch: 0.176 × 0.176 mm
7. Standby current: about 0.01uA
8. Resolution: 296×168 pixels
9. Without backlight, the latest content can be displayed for a long time even if the power is cut off.
10. Extremely low power consumption, basically only need to upgrade.
11. SPI interface for connecting Raspberry Pi / Jetson Nano / Arduino / STM32 and other controller boards.
12. Built-in voltage converter, compatible with 3.3V/5V MC.

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.
2. LX7 32-bit Xtensa dual-core processor, 240 MHz
3. Easy to integrate, LX7 32-bit, 2MB PSRAM, wireless network, dual-core processor
4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, operating frequency 240mhz
5. Built-in 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory
6. Built-in 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance
7. Type-C connector, more convenient to use
8. The built-in CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface
9. Built-in MP28164 DC-DC chip, high efficiency DC-DC step-down boost chip, the load current can reach 2A
10. 27 multifunctional GPIO pins, configurable pin functions, enabling flexible development and integration
11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16bit camera interface), LCD interface (8-16bit parallel RGB, 18080, MOTO6800), etc., flexible realization of various functions
12. Embedded modules allow direct soldering to the carrier board
13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios
14. Support Raspberry Pi Pico expansion board ecosystem, suitable for AI LoT application development
15. Support ESP-IDF, Arduino, MicroPython full SDK, development resources, tutorials, help you get started easily
16. ESP32-S3 is specially designed for AloT applications, using the Xtensa 32-bit LX7 dual-core processor with a frequency of up to 240MHz, powerful aluminum computing power and reliable security features
17. Support WIFI and BLE 5, ESP32-S3 integrates 2.4GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh
18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor
19. 2.4G monopole ceramic antenna
20. W25Q128JVSIQ: 16MB Flash
21. Start button: Press to enter download mode after recovery
22. CH334F: USB HUB controller
23. CH343P: USB to UART chip
24. MP28164: High efficiency DC-DC step-down boost chip
25. Support multiple Pico expansion modules: Eval-Board, 3.5 inch LCD, 1.3 inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS module

1. Official Raspberry Pi Hardware Debugging Toolkit Designed for Pico
2. Built with RP2040 microcontroller chip designed by for Raspberry Pi
3. Integrated design, with solderless plug-and-play functionality, can be connected to the debug interface of the target board through the SWD interface
4. British designed RP2040 microcontroller chip for Raspberry Pi
5. Built-in Micro-USB interface, used to connect to PC or other motherboards
6. Built-in 3PIN SWD interface, used to connect the target board
7. Built-in CMSIS-DAP standard 3PIN USB to UART bridge interface, compatible with most ARM microcontrollers
8. Using OpenOCD and other tools that support CMSIS-DAP
9. Follow the Raspberry Pi 3PIN debug connector specifications
10. Comes with clear plastic case and connection cable
11. Open source program, more convenient for firmware upgrade
12. Dimensions: 22x32 mm

1. Support development environment, such as ESP-IDF, Arduino, MicroPython, etc.
2. LX7 32-bit Xtensa dual-core processor, 240 MHz
3. Easy to integrate, LX7 32-bit, 2MB PSRAM, wireless network, dual-core processor
4. Using ESP32-S3R2 chip, Xtensa 32-bit LX7 dual-core processor, operating frequency 240mhz
5. Built-in 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB flash memory
6. Built-in 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with excellent RF performance
7. Type-C connector, more convenient to use
8. The built-in CH343 and CH334 chips can meet the needs of USB and UART development through the Type-C interface
9. Built-in MP28164 DC-DC chip, high efficiency DC-DC step-down boost chip, the load current can reach 2A
10. 27 multifunctional GPIO pins, configurable pin functions, enabling flexible development and integration
11. Abundant external interfaces, including full-speed USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-16bit camera interface), LCD interface (8-16bit parallel RGB, 18080, MOTO6800), etc., flexible realization of various functions
12. Embedded modules allow direct soldering to the carrier board
13. Support a variety of low-power working states, adjustable communication distance, data rate and power consumption balance, to meet the power consumption requirements of various application scenarios
14. Support Raspberry Pi Pico expansion board ecosystem, suitable for AI LoT application development
15. Support ESP-IDF, Arduino, MicroPython full SDK, development resources, tutorials, help you get started easily
16. ESP32-S3 is specially designed for AloT applications, using the Xtensa 32-bit LX7 dual-core processor with a frequency of up to 240MHz, powerful aluminum computing power and reliable security features
17. Support WIFI and BLE 5, ESP32-S3 integrates 2.4GHz Wi-Fi (802.11 B/G/N) and 40mhz bandwidth to support its Bluetooth low energy subsystem to support Bluetooth 5 (LE) and Bluetooth Mesh
18. ESP32-S3: Xtensa 32-bit LX7 dual-core processor
19. 2.4G monopole ceramic antenna
20. W25Q128JVSIQ: 16MB Flash
21. Start button: Press to enter download mode after recovery
22. CH334F: USB HUB controller
23. CH343P: USB to UART chip
24. MP28164: High efficiency DC-DC step-down boost chip
25. Support multiple Pico expansion modules: Eval-Board, 3.5 inch LCD, 1.3 inch OLED, 8-segment LED, e-paper, NB-IoT module, GPIO expander, sensor module, RTC module, UPS module

Hardware specifications.
1. Chipset: Espressif-ESP32-SCROOM, LAN8720A Ethernet chip, SI 3404 power management chip
2. Flash: 4 MB
3. RAM: 8 MB
4. SRAM: 520 KB SRAM
5. Button: robot, rest
6. External device: TF card slot, Type-C interface, PA2369NL 1825-S transformer, HR861153C Ethernet-Poe interface
7. USB to TTL: CP 2104
8. Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC
9. Satellite clock: 32.768 MHz crystal oscillator
10. Operating temperature range: -40 degrees Celsius to +85 degrees Celsius
11. Dimensions: 70x52.3x17mm
12. Weight: 26.85 g

Power Specifications
1. Power input: USB Type-C 5V
2. HR861153C Ethernet-Poe Ethernet interface: 50V
3. Working voltage: 2.7V-3.6V
4. Output current: about 1.2a
5. Charging current: 500mA
6. USB: USB Type-C

Wifi
1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC (ESP 32 chips)
2. Protocol: 802.11 B/G/N (802.11n, 150Mbps acceleration) A-MPDU and A-MSDU Aggregation, support 0.4? protection interval
3. Frequency range: 2.4Ghz~2.5GHz (2400m~2483.5m)
4. Transmit Power: 22 dBm
5. Communication distance: 300 meters

Bluetooth
1. Protocol: Complies with Bluetooth V4.2BR/EDR and BLE standards
2. Radio frequency: -97 DBM Sensitivity NZIF Receiver Class-1 Class-2 Class-3 Emitter AFH AFH
3. Audio: CVSD & SBC Audio

Software Specifications
1. Wi-Fi Mode: Workstation / SoftAp / SoftAp + Station / P2P
2. Security mechanism: WPA / WPA 2 / WPA 2-Enterprise / WPS
3. Encryption type: AES / RSA / ECC / SHA
4. Firmware Update: Download UART/OTA (Download and write firmware via network/host)
5. Software development: Support cloud server development / SDK for user firmware development
6. Network Protocol: IPV 4, IPV 6, SSL, TCP/UDP/HTTP/FTP/MQTT
7. User configuration: + instruction set, cloud server, Android / Iosapp
8. OS: Freertos

1. New version of ESP32: Rev1
2. Wi-Fi / Bluetooth / 4MB Flash Memory / 4MB PSRAM / 3D Antenna / Lora

Product Description
1. Working voltage: 1.8~3.7V
2. Acceptable current: 10 ~ 14mA
3. Emission current:
-120mA to +20dBm
-90mA at +17dBm
-29th to +13dbm
4. Working frequency: 433HMZ SX1278 version / 915MHz SX1276 version / 868MHZ SX1276 version
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM at Lora and 62.5khz & SF = 12 and 146bps
- 136DBM at Lora and 125khz & SF = 12 and 293bps
- 118DBM on Lora & 125khz & SF = 6 & 9380bps
- 123DBM on FSK and 5KHZ and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
- 1.2k ~ 300kbps at FSK
- 0.018k ~ 37.5kbps in Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA in sleep
- 1.5Ua minimum
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. RF alarm function
18. Low pressure detection and temperature sensor
19. Fast Wake-up and Frequency Skipping
20. Highly configurable package manager

Global Positioning System
1. Neo-M8N GPS module, universal 3V-5V power supply
2.Designated module with ceramic antenna, super strong signal
3. Save the EEPROM configuration parameter data
4. With data backup battery
5. With LED signal indicator
6. The default baud rate: 9600

Energy
1. TP5400.
2. 2A Battery Management
3. LED Indicator: There are 4 LEDs to display the battery status in real time.
4. Power button: Click once to start. Double tap quickly to close.
5. USB.
6. CP2104-GMR
7. Pre-flash firmware: Softrf V4.0

Packing list:
1. TTGO T-BEAM ESP32
2. 433MHz antenna.
3. PIN X 1
4. Screw the washer x 3

Note: OLED is not included in the invoice

1. New version of ESP32: Rev1
2. Wi-Fi / Bluetooth / 4MB Flash Memory / 4MB PSRAM / 3D Antenna / Lora

Product Description
1. Working voltage: 1.8~3.7V
2. Acceptable current: 10 ~ 14mA
3. Emission current:
-120mA to +20dBm
-90mA at +17dBm
-29th to +13dbm
4. Working frequency: 433HMZ SX1278 version / 915MHz SX1276 version / 868MHZ SX1276 version
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM at Lora and 62.5khz & SF = 12 and 146bps
- 136DBM at Lora and 125khz & SF = 12 and 293bps
- 118DBM on Lora & 125khz & SF = 6 & 9380bps
- 123DBM on FSK and 5KHZ and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
- 1.2k ~ 300kbps at FSK
- 0.018k ~ 37.5kbps in Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA in sleep
- 1.5Ua minimum
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. RF alarm function
18. Low pressure detection and temperature sensor
19. Fast Wake-up and Frequency Skipping
20. Highly configurable package manager

Global Positioning System
1. Neo-M8N GPS module, universal 3V-5V power supply
2.Designated module with ceramic antenna, super strong signal
3. Save the EEPROM configuration parameter data
4. With data backup battery
5. With LED signal indicator
6. The default baud rate: 9600

Energy
1. TP5400.
2. 2A Battery Management
3. LED Indicator: There are 4 LEDs to display the battery status in real time.
4. Power button: Click once to start. Double tap quickly to close.
5. USB.
6. CP2104-GMR
7. Pre-flash firmware: Softrf V4.0

Packing list:
1. TTGO T-BEAM ESP32
2. 433MHz antenna.
3. PIN X 1
4. Screw the washer x 3

Note: OLED is not included in the invoice

1. Official ESP32-WROVER Expressive Module
2. New ESP32 version: Rev1
3. Wireless Internet
4. Bluetooth.
5. 4MB flash memory
6. 8MB PSRAM.
7. Lithium battery interface, maximum charging current 500mA
8. Support TF memory card
9. With 3D threads

1. Working voltage: 1.8~13.7V
2. Acceptable current: 10 ~ 114 mA
3. Emission current:
- 120mA at + 20dBm
- 90 mA is at + 17dbm
- 29mA at + 13dBm
4. Working frequency: 923MHz
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM is located at Lora & 62.5khz & SF = 12 & 146bps
- 136DBM is at Lora & 125khz & SF = 12 & 293bps
- 118DBM It is located at Lora & 125khz & SF = 6 and 9380bps
- 123DBM lies at FSK and 5KHz and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
-1.2K ~ 1300 kbps at FSK
-0.018k ~ 37.5kbps to Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA Sleep
- 1.5Ua Idle.
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. Low voltage detection and temperature sensor
18. Fast Wake-up and Frequency Skipping
19. Highly configurable package manager
20. Global Positioning System
21. Neo-6m GPS module, universal 3V-5V power supply
22.Designated module with ceramic antenna, super signal
23. Save EEPROM configuration parameter data
24. Battery with data backup
25. LED signal indicator
26. Default baud rate: 9600
27. Power: TP5400, 1A Battery Management
28. LED indicator
29. CP2104-GMR
30. Pre-flash firmware: softrf v4.0

This product is based on Lora radio frequency, 868 MHz (common in North America), 915 MHz (common in Europe) and 433 MHz (common in Asia Pacific)

1. Working voltage: 1.8~13.7V
2. Acceptable current: 10 ~ 114 mA
3. Emission current:
- 120mA at + 20dBm
- 90 mA is at + 17dbm
- 29mA at + 13dBm
4. Working frequency: 923MHz
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM is located at Lora & 62.5khz & SF = 12 & 146bps
- 136DBM is at Lora & 125khz & SF = 12 & 293bps
- 118DBM It is located at Lora & 125khz & SF = 6 and 9380bps
- 123DBM lies at FSK and 5KHz and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
-1.2K ~ 1300 kbps at FSK
-0.018k ~ 37.5kbps to Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA Sleep
- 1.5Ua Idle.
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. Low voltage detection and temperature sensor
18. Fast Wake-up and Frequency Skipping
19. Highly configurable package manager
20. Global Positioning System
21. Neo-6m GPS module, universal 3V-5V power supply
22.Designated module with ceramic antenna, super signal
23. Save EEPROM configuration parameter data
24. Battery with data backup
25. LED signal indicator
26. Default baud rate: 9600
27. Power: TP5400, 1A Battery Management
28. LED indicator
29. CP2104-GMR
30. Pre-flash firmware: softrf v4.0

This product is based on Lora radio frequency, 868 MHz (common in North America), 915 MHz (common in Europe) and 433 MHz (common in Asia Pacific)

1. Working voltage: 1.8~13.7V
2. Acceptable current: 10 ~ 114 mA
3. Emission current:
- 120mA at + 20dBm
- 90 mA is at + 17dbm
- 29mA at + 13dBm
4. Working frequency: 433MHz
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM lies at Lora & 62.5khz & SF = 12 ??? 146bps
- 136DBM Located in Lora & 125khz & SF = 12 ??? 293bps
- 118DBM is at Lora & 125khz & SF = 6 ??? 9380bps
- 123DBM lies on FSK and 5KHZ and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
-1.2K ~ 1300 kbps at FSK
-0.018k ~ 37.5kbps to Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA Sleep
- 1.5Ua Idle.
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. RF alarm function
18. Low voltage detection and temperature sensor
19. Fast Wake-up and Frequency Skipping
20. Highly configurable package manager
21. SMA IP5306 Antenna

This product is based on Lora radio frequency, 868 MHz (common in North America), 915 MHz (common in Europe) and 433 MHz (common in Asia Pacific)

1. Working voltage: 1.8~13.7V
2. Acceptable current: 10 ~ 114 mA
3. Emission current:
- 120mA at + 20dBm
- 90 mA is at + 17dbm
- 29mA at + 13dBm
4. Working frequency: 433MHz
5. Transmit power: +20dbm
6. Sensitivity reception:
- 139DBM lies at Lora & 62.5khz & SF = 12 ??? 146bps
- 136DBM Located in Lora & 125khz & SF = 12 ??? 293bps
- 118DBM is at Lora & 125khz & SF = 6 ??? 9380bps
- 123DBM lies on FSK and 5KHZ and 1.2Kbps
7. Frequency error: +/- 15kHz
8. FIFO space: 64bytes
9. Vote on data:
-1.2K ~ 1300 kbps at FSK
-0.018k ~ 37.5kbps to Lora
10. Modulation mode: FSK, GFSK, MSK, GMSK, Lora TM, Ook
11. Interface Module: SPI
12. Sleep Current:
- 0.2UA Sleep
- 1.5Ua Idle.
13. Working temperature: -40 degrees Celsius- +85 degrees Celsius
14. Digital RSSI function
15. Automatic frequency correction
16. Automatic gain control
17. RF alarm function
18. Low voltage detection and temperature sensor
19. Fast Wake-up and Frequency Skipping
20. Highly configurable package manager
21. SMA IP5306 Antenna

This product is based on Lora radio frequency, 868 MHz (common in North America), 915 MHz (common in Europe) and 433 MHz (common in Asia Pacific)

Product Description Hardware Specifications:
1. Main chip: ESP32
2. Module: ESP32-WROVER-B, SIM7600E-H
3. Interface: USB, SD card, solar input interface
4. Flash memory: 4m flash / 8m PSRAM
5. Button: reset, power switch
6. USB to TTL: CP2104
7. Clock speed: 40 MHz
8. SIM card size: NANO SIM card
9. SIM antenna
10. GPS antenna.
11. Operating temperature range: -40-85 degrees
12. Product Dimensions: 111mm x 37mm x 20mm
13. Product weight: 50g

Power Specifications:
1. Working voltage: 5V input
2.Solar input voltage range ???4.4-6V
3. Working current: about 200mA
4. Charging current: 780 mA
5. Battery model: 18650
6. Battery holder model: 18650 battery holder
7. JST connector: 2pin 2mm
8. USB: Type-C 3.0

Wifi:
1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC
2. Protocol: 802.11 B/g/N (802.11n ??? speed up to 100 mbps) A-MPDU and A-MSDU polymerization ??? Support Protection interval 0.4?
3. Frequency: range 2.4 GHz ~ 2.5 GHz (2400m ~ 2483.5m)
4. Transmit power: 22DBM
5. Communication distance: 300m

Bluetooth:
1. Bluetooth Meet Protocol: V4.2BR/EDR and BLE Standard
2. Radio Frequency: with -97DBM Sensitivity NZIF Receiver Class-1, Class-2 and Class-3 Emit AFH
3. Audio frequency: CVSD and SBC audio frequency

Software Specification:
1. Wi-Fi Mode: Station / SoftAp / SoftAp + Station / P2P
2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS
3. Encryption type: AES / RSA / ECC / SHA
4. Firmware Update: Download UART/OTA ??? via network/host to download and write firmware ???
5. Software development: Support cloud server development / SDK for user firmware development
6. Network Protocol: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
7. User configuration: AT+ instruction set, cloud server, Android/iOS app
8. OS: Freertos

Version update function:
1. The positive and negative poles of the battery are connected to the wrong protection, overcharge and discharge protection
2. GPS power control, reduce power consumption, reaches lowest 300ua when sleeping
3. Replacing ordinary charging IC with solar charging IC

Product Description Hardware Specifications:
1. Main chip: ESP32
2. Module: ESP32-WROVER-B,SIM7000G
3. Interface:USB,SD Card,Solar Input interface
4. Flash Memory: 4M Flash / 8M PSRAM
5. Button: Reset, Power switch
6. USB to TTL: CP2104
7. Car Clock: 40MHz
8. SIM Card Size: Nano SIM Card
9. SIM Antenna
10. GPS Antenna
11. Operating Temperature Range: -40-85 degrees
12. Product Size: 111mm x 37mm x 20mm
13.Product Weight: 50g

Power Specifications:
1. Working Voltage: 5V input
2. Solar input voltage range???4.4-6V
3.Working Curent: About 200mA
4.Charging Current: 780mA
5.Battery Model: 18650
6. Battery Holder Model: 18650 battery holder
7. JST Connector: 2pin 2mm
8. USB: TYPE-C 3.0

Wi-Fi:
1. Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC
2. Protocol: 802.11 b/g/n(802.11n???speed up to150Mbps)A-MPDU and A-MSDU polymerization???support 0.4??S Protection interval
3. Frequency: range 2.4GHz~2.5GHz(2400M~2483.5M)
4. Transmit Power: 22dBm
5. Communication distance: 300m

Bluetooth:
1. Protocol meet Bluetooth: v4.2BR/EDR and BLE standard
2. Radio Frequency: with -97dBm sensitivity NZIF receiver Class-1, Class-2&Class-3 emitter AFH
3. Audio Frequency: CVSD&SBC audio frequency

Software Specification:
1. Wi-Fi Mode : Station/SoftAP/SoftAP+Station/P2P
2. Security Mechanism : WPA/WPA2/WPA2-Enterprise/WPS
3. Encryption Type: AES/RSA/ECC/SHA
4. Firmware Upgrade :UART download/OTA???Through network/host to download and write firmware???
5. Software Development: Support cloud server development /SDK for user firmware development
6. Networking Protocol: IPV4, IPV6, SSL, TCP/UDP/HTTP/FTP/MQTT
7. User Configuration: AT+ Instruction set, cloud server, Android/iOS APP
8. OS : FreeRTOS

Version update function:
1. The batterys positive and negative poles are connected to the wrong protection, overcharge and over discharge protection
2. GPS power control, reduce power consumption, the lowest reaches 300uA when sleeping
3. Replacement of ordinary charging IC with solar charging IC

Product Description Hardware Specifications:
1. Main chip: ESP32
2. Module: ESP32-WROVER-B, 915MHz Shield
3. Interface: USB, SD card, solar input interface
4. Flash memory: 4m flash / 8m PSRAM
5. Button: reset, power switch
6. USB to TTL: CP2104
7. Clock speed: 40 MHz
8. SIM card size: NANO SIM card
9. SIM antenna
10. GPS antenna.
11. Operating temperature range: -40-85 degrees
12. Product Dimensions: 111mm x 37mm x 20mm
13. Product weight: 50g

Power Specifications:
1. Working voltage: 5V input
2.Solar input voltage range ???4.4-6V
3. Working current: about 200mA
4. Charging current: 780 mA
5. Battery model: 18650
6. Battery holder model: 18650 battery holder
7. JST connector: 2pin 2mm
8. USB: Type-C 3.0

Wifi:
1. Standard: FCC / CE-RED / IC / TELEC / KCC / SRRC / NCC
2. Protocol: 802.11 B/g/N (802.11n ??? speed up to 100 mbps) A-MPDU and A-MSDU polymerization ??? Support Protection interval 0.4?
3. Frequency: range 2.4 GHz ~ 2.5 GHz (2400m ~ 2483.5m)
4. Transmit power: 22DBM
5. Communication distance: 300m

Bluetooth:
1. Bluetooth Meet Protocol: V4.2BR/EDR and BLE Standard
2. Radio Frequency: with -97DBM Sensitivity NZIF Receiver Class-1, Class-2 and Class-3 Emit AFH
3. Audio frequency: CVSD and SBC audio frequency

Software Specification:
1. Wi-Fi Mode: Station / SoftAp / SoftAp + Station / P2P
2. Security mechanism: WPA / WPA2 / WPA2-Enterprise / WPS
3. Encryption type: AES / RSA / ECC / SHA
4. Firmware Update: Download UART/OTA ??? via network/host to download and write firmware ???
5. Software development: Support cloud server development / SDK for user firmware development
6. Network Protocol: IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
7. User configuration: AT+ instruction set, cloud server, Android/iOS app
8. OS: Freertos

Version update function:
1. The positive and negative poles of the battery are connected to the wrong protection, overcharge and discharge protection
2. GPS power control, reduce power consumption, reaches lowest 300ua when sleeping
3. Replacing ordinary charging IC with solar charging IC