Ricambi Smartphone, Tablet e Dispositivi | 16e88 – Page 326

	__ __
Descrizione	Descrizione - __
Valutazione	Valutazione - __
Colore	Colore - __
	View full details

For Asus Zenfone 8 ZS590KS Back Cover Housing Sticker, For Asus Zenfone 8 ZS590KS

For Asus Zenfone 8 ZS590KS Back Cover Housing Sticker, For Asus Zenfone 8 ZS590KS

(0)

€0,71

NFC module for Google Pixel 4 XL, For Google Pixel 4 XL NFC

NFC module for Google Pixel 4 XL, For Google Pixel 4 XL NFC

(0)

€2,79

Wireless Charging Coil for Google Pixel 4 XL, For Google Pixel 4 XL

Wireless Charging Coil for Google Pixel 4 XL, For Google Pixel 4 XL

(0)

€2,79

Rear camera for Google Pixel 5, For Google Pixel 5

Rear camera for Google Pixel 5, For Google Pixel 5

(0)

€2,38

SIM card tray for Google Pixel 4a, For Google Pixel 4a

SIM card tray for Google Pixel 4a, For Google Pixel 4a

(0)

€0,43

Camera Lens Cover for Google Pixel 4a, For Google Pixel 4a

Camera Lens Cover for Google Pixel 4a, For Google Pixel 4a

(0)

€1,48

Camera Lens Cover for Google Pixel 5, For Google Pixel 5

Camera Lens Cover for Google Pixel 5, For Google Pixel 5

(0)

€1,48

SIM Card Tray for Google Pixel 5, For Google Pixel 5, For Google Pixel 5 (Green)

SIM Card Tray for Google Pixel 5, For Google Pixel 5, For Google Pixel 5 (Green)

(0)

€0,43

OLED Material LCD Screen and Digitizer Full Assembly for Xiaomi Redmi Note 10 4G / Redmi Note 10S / Redmi Note 11 SE India / Poco M5s M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL, M2101K7AI, M2101K7AG

OLED Material LCD Screen and Digitizer Full Assembly for Xiaomi Redmi Note 10 4G / Redmi Note 10S / Redmi Note 11 SE India / Poco M5s M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL, M2101K7AI, M2101K7AG

(0)

€31,42

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (OLED Material) for Xiaomi Redmi Note 10 / Redmi Note 10S M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL, M2101K7AI, M2101K7AG
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Xiaomi: Redmi Note 10S , Redmi Note 10

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

AMOLED LCD Screen and Digitizer Full Assembly for Asus Zenfone 8 ZS590KS-2A007EU I006D, For Asus Zenfone 8(AMOLED)

AMOLED LCD Screen and Digitizer Full Assembly for Asus Zenfone 8 ZS590KS-2A007EU I006D, For Asus Zenfone 8(AMOLED)

(0)

€58,25

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement (AMOLED Material) for Asus Zenfone 8 ZS590KS-2A007EU I006D
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Asus: Zenfone 8

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

AMOLED LCD Screen and Digitizer Full Assembly for Asus Zenfone 8 Flip ZS672KS, For Asus Zenfone 8 Flip(AMOLED)

AMOLED LCD Screen and Digitizer Full Assembly for Asus Zenfone 8 Flip ZS672KS, For Asus Zenfone 8 Flip(AMOLED)

(0)

€31,40

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (AMOLED Material) for Asus Zenfone 8 Flip ZS672KS
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Asus: Zenfone 8 Flip

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Honor Pad 5 10.1, For Honor Pad 5 10.1

LCD Screen and Digitizer Full Assembly for Honor Pad 5 10.1, For Honor Pad 5 10.1

(0)

€29,19

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is okay, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Honor Pad 5 10.1
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

package weight

Weight of each package

0.57kgs / 1.26lb

One size fits all product

35cm * 26cm * 7cm / 13.78inch * 10.24inch * 2.76inch

Quantity of a box

14

Weight of a box

8.70kgs / 19.18lb

Dimensions of a box

54cm * 37cm * 37cm / 21.26inch * 14.57inch * 14.57inch

Goods counter

20GP: 360 Box * 14 Piece = 5040 Piece
40HQ: 837 Box * 14 Piece = 11718 Piece

LCD Screen and Digitizer Full Assembly for Huawei MediaPad T5 10.1 (LTE), For Huawei MediaPad T5 10.1 (LTE)

LCD Screen and Digitizer Full Assembly for Huawei MediaPad T5 10.1 (LTE), For Huawei MediaPad T5 10.1 (LTE)

(0)

€29,19

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is okay, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Huawei MediaPad T5 10.1 (LTE)
2. Replace your broken or unusable item with a new one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

package weight

Weight of each package

0.57kgs / 1.26lb

One size fits all product

35cm * 26cm * 7cm / 13.78inch * 10.24inch * 2.76inch

Quantity of a box

14

Weight of a box

8.70kgs / 19.18lb

Dimensions of a box

54cm * 37cm * 37cm / 21.26inch * 14.57inch * 14.57inch

Goods counter

20GP: 360 Box * 14 Piece = 5040 Piece
40HQ: 837 Box * 14 Piece = 11718 Piece

For OPPO A54 4G Rear Camera Lens 10pcs, For OPPO A54 4G(Black), For OPPO A54 4G(Blue)

For OPPO A54 4G Rear Camera Lens 10pcs, For OPPO A54 4G(Black), For OPPO A54 4G(Blue)

(0)

€2,37

LCD Screen and Digitizer Full Assembly for Huawei MatePad 10.4 BAH3-W09, For Huawei MatePad 10.4 BAH3-W09, For Huawei MatePad 10.4

LCD Screen and Digitizer Full Assembly for Huawei MatePad 10.4 BAH3-W09, For Huawei MatePad 10.4 BAH3-W09, For Huawei MatePad 10.4

(0)

€36,50

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is okay, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Huawei MatePad 10.4 BAH3-W09
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

package weight

Weight of each package

0.57kgs / 1.26lb

One size fits all product

35cm * 26cm * 7cm / 13.78inch * 10.24inch * 2.76inch

Quantity of a box

14

Weight of a box

8.70kgs / 19.18lb

Dimensions of a box

54cm * 37cm * 37cm / 21.26inch * 14.57inch * 14.57inch

Goods counter

20GP: 360 Box * 14 Piece = 5040 Piece
40HQ: 837 Box * 14 Piece = 11718 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme Narzo 20 Pro / Realme 7 (Global) 4G RMX2155, For OPPO Realme 7 (Global) 4G

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme Narzo 20 Pro / Realme 7 (Global) 4G RMX2155, For OPPO Realme 7 (Global) 4G

(0)

€14,90

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO Realme Narzo 20 Pro / Realme 7 (Global) 4G RMX2155.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7 (Asia) 4G RMX2151 RMX2163, For OPPO Realme 7 (Asia) 4G

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7 (Asia) 4G RMX2151 RMX2163, For OPPO Realme 7 (Asia) 4G

(0)

€14,90

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO Realme 7 (Asia) 4G RMX2151 RMX2163.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7i / Realme C17 RMX2101 RMX2103, For OPPO Realme 7i/Realme C17

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7i / Realme C17 RMX2101 RMX2103, For OPPO Realme 7i/Realme C17

(0)

€12,85

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO Realme 7i / Realme C17 RMX2101 RMX2103.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Mi 11 Lite 4G/11 Lite 5G NE M2101K9AG M2101K9AI, For Xiaomi Mi 11 Lite 4G (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Mi 11 Lite 4G/11 Lite 5G NE M2101K9AG M2101K9AI, For Xiaomi Mi 11 Lite 4G (Original)

(0)

€57,05

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Xiaomi Mi 11 Lite 4G/11 Lite 5G NE M2101K9AG M2101K9AI.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Xiaomi: Mi 11 Lite 5G NE , My 11 Lite

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for vivo Y7s, For vivo Y7s (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for vivo Y7s, For vivo Y7s (Original)

(0)

€70,57

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for vivo Y7s.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Live: Y7s

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO A91 PCPM00 CPH2001 CPH2021, For OPPO A91 (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO A91 PCPM00 CPH2001 CPH2021, For OPPO A91 (Original)

(0)

€52,30

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO A91 PCPM00 CPH2001 CPH2021.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

OPPO: A91

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Reno4 SE PEAT00 PEAM00, For OPPO Reno4 SE (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Reno4 SE PEAT00 PEAM00, For OPPO Reno4 SE (Original)

(0)

€59,77

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO Reno4 SE PEAT00 PEAM00.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

OPPO: Reno4 SE

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7 Pro RMX2170, For OPPO Realme 7 Pro (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 7 Pro RMX2170, For OPPO Realme 7 Pro (Original)

(0)

€64,44

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for OPPO Realme 7 Pro RMX2170.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO K9 PEXM00, For OPPO K9 (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO K9 PEXM00, For OPPO K9 (Original)

(0)

€64,81

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame
for OPPO K9 PEXM00.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

OPPO: K9

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO Reno6 5G PEQM00 CPH2251, For OPPO Reno6 5G (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO Reno6 5G PEQM00 CPH2251, For OPPO Reno6 5G (Original)

(0)

€68,12

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for OPPO Reno6 5G PEQM00 CPH2251
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

OPPO: Reno6 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO K9 / K9 Pro PEXM00, For OPPO K9 / K9 Pro (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO K9 / K9 Pro PEXM00, For OPPO K9 / K9 Pro (Original)

(0)

€69,76

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO K9 / K9 Pro PEXM00
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

OPPO: K9 Pro , K9

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO Find X3 Lite CPH2145, For OPPO Find X3 Lite (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO Find X3 Lite CPH2145, For OPPO Find X3 Lite (Original)

(0)

€68,12

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO Find X3 Lite CPH2145
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

OPPO: Find X3 Lite

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO Realme Q3 5G, For Realme Q3 5G (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO Realme Q3 5G, For Realme Q3 5G (Original)

(0)

€18,28

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO Realme Q3 5G
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO A54 5G CPH2195, For OPPO A54 5G (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO A54 5G CPH2195, For OPPO A54 5G (Original)

(0)

€17,22

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO A54 5G CPH2195
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

OPPO: A54 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO Realme V13 5G, For Realme V13 5G (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO Realme V13 5G, For Realme V13 5G (Original)

(0)

€19,26

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO Realme V13 5G
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO A93s PFGM00, For OPPO A93s (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO A93s PFGM00, For OPPO A93s (Original)

(0)

€17,22

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO A93s PFGM00
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

OPPO: A93s 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for OPPO A53s 5G CPH2321, For OPPO A53s 5G (Original)

Original LCD Screen and Digitizer Full Assembly for OPPO A53s 5G CPH2321, For OPPO A53s 5G (Original)

(0)

€13,93

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO A53s 5G CPH2321
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

OPPO: A53s

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for OPPO A92s / Realme 6 Pro RMX2061 RMX2063, For OPPO A92s

LCD Screen and Digitizer Full Assembly for OPPO A92s / Realme 6 Pro RMX2061 RMX2063, For OPPO A92s

(0)

€15,93

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for OPPO A92s / Realme 6 Pro RMX2061 RMX2063
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

OPPO: A92s

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C20 / Realme C21 / Realme C11 (2021), For OPPO Realme C20 (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C20 / Realme C21 / Realme C11 (2021), For OPPO Realme C20 (Original)

(0)

€15,11

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame
for OPPO Realme C20 / Realme C21 / Realme C11 (2021).
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Redmi Note 9 5G / Redmi Note 9T 5G M2007J22C, For Xiaomi Redmi Note 9 5G (Original)

Original LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Redmi Note 9 5G / Redmi Note 9T 5G M2007J22C, For Xiaomi Redmi Note 9 5G (Original)

(0)

€16,39

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame
for Xiaomi Redmi Note 9 5G/Redmi Note 9T 5G M2007J22C.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

Xiaomi: Redmi Note 9T 5G , Redmi Note 9 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT LCD Screen for Xiaomi Redmi K40 Pro / Redmi K40 / Redmi K40 Pro+ / Poco F3 / Redmi K40s with Digitizer Full Assembly (Not Support Fingerprint Identification), For Xiaomi Redmi K40 Pro / Redmi K40 (TFT)

TFT LCD Screen for Xiaomi Redmi K40 Pro / Redmi K40 / Redmi K40 Pro+ / Poco F3 / Redmi K40s with Digitizer Full Assembly (Not Support Fingerprint Identification), For Xiaomi Redmi K40 Pro / Redmi K40 (TFT)

(0)

€11,83

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for Xiaomi Redmi K40 Pro / Redmi K40 / Redmi K40 Pro+ / Poco F3 / Redmi K40s
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: Does not support fingerprint identification

Size:

General

Compatible with

Xiaomi: Redmi K40S , Poco F3 , Redmi K40 Pro+ , Redmi K40 Pro , Redmi K40

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for vivo S9e/V21 4G V2066, V2108 / V21 5G V2050 / Y71t V2102A / S15e V2190A, For vivo S9e (TFT)

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for vivo S9e/V21 4G V2066, V2108 / V21 5G V2050 / Y71t V2102A / S15e V2190A, For vivo S9e (TFT)

(0)

€11,38

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for vivo S9e/V21 4G V2066, V2108/V21 5G V2050/Y71t V2102A/S15e V2190A
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: It does not support fingerprint identification
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Live: S15e , Y71t , V21 4G , V21 5G , S9e

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A, For vivo S9 (TFT)

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A, For vivo S9 (TFT)

(0)

€11,94

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: Does not support fingerprint identification

Size:

General

Compatible with

Live: V23 5G , S12 , S10 Pro , s10 , S9

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly for OPPO R15X / K1 / RX17 Neo PBCM10, Not Support Fingerprint Identification, For OPPO R15X / K1 / RX17 (TFT)

TFT Material LCD Screen and Digitizer Full Assembly for OPPO R15X / K1 / RX17 Neo PBCM10, Not Support Fingerprint Identification, For OPPO R15X / K1 / RX17 (TFT)

(0)

€12,10

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for OPPO R15X / K1 / RX17 Neo PBCM10
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: Does not support fingerprint identification
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

OPPO: RX17 Neo , K1 , R15X

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly for OPPO Reno5 5G / Reno5 4G / K9 / Realme Q3 Pro / Realme GT Neo, Not Support Fingerprint Identification, For OPPO Reno5 5G / Reno5 4G (TFT)

TFT Material LCD Screen and Digitizer Full Assembly for OPPO Reno5 5G / Reno5 4G / K9 / Realme Q3 Pro / Realme GT Neo, Not Support Fingerprint Identification, For OPPO Reno5 5G / Reno5 4G (TFT)

(0)

€11,38

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for OPPO Reno5 5G / Reno5 4G / K9 / Realme Q3 Pro / Realme GT Neo
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: It does not support fingerprint identification

Size:

General

Compatible with

OPPO: K9 , Reno5 4G , Reno5 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Charging Port Board for Xiaomi Redmi Note 10 5G / Poco M3 Pro 5G / Redmi Note 10T 5G, For Xiaomi Redmi Note 10 5G

Charging Port Board for Xiaomi Redmi Note 10 5G / Poco M3 Pro 5G / Redmi Note 10T 5G, For Xiaomi Redmi Note 10 5G

(0)

€1,02

AMOLED LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Mi Note 10 Lite M2002F4LG, For Xiaomi Mi Note 10 Lite (AMOLED)

AMOLED LCD Screen and Digitizer Full Assembly with Frame for Xiaomi Mi Note 10 Lite M2002F4LG, For Xiaomi Mi Note 10 Lite (AMOLED)

(0)

€61,57

Product information
1. Replacement LCD display + touch screen digitizer assembly with frame (AMOLED material)
for Xiaomi Mi Note 10 Lite M2002F4LG.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Xiaomi: Mi Note 10 Lite

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C2 / A1k, For OPPO Realme C2 / A1k

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C2 / A1k, For OPPO Realme C2 / A1k

(0)

€12,64

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for OPPO Realme C2 / A1k.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

OPPO: A1k

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C15 RMX2180 (MTK Standard Version), For OPPO Realme C15(MTK)

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C15 RMX2180 (MTK Standard Version), For OPPO Realme C15(MTK)

(0)

€17,47

Product information
1. Replacement LCD display + touch screen digitizer assembly (with frame) for OPPO Realme C15 RMX2180 (MTK Standard Version).
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C12 RMX2189, For OPPO Realme C12

Original LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C12 RMX2189, For OPPO Realme C12

(0)

€17,47

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for OPPO Realme C12 RMX2189.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly with Frame for vivo Y30 (China) / Y20s / Y20 / Y20i V2027 V2032 V2029 V2034A, For vivo Y30 (China) / Y20s / Y20 / Y20i

Original LCD Screen and Digitizer Full Assembly with Frame for vivo Y30 (China) / Y20s / Y20 / Y20i V2027 V2032 V2029 V2034A, For vivo Y30 (China) / Y20s / Y20 / Y20i

(0)

€12,35

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for vivo Y30 (China) / Y20s / Y20 / Y20i V2027 V2032 V2029 V2034A.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Live: Y20s , Y30 (China) , Y20 , Y20i

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C3 / C3i RMX2027 RMX2020 RMX2021, For OPPO Realme C3 / C3i

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme C3 / C3i RMX2027 RMX2020 RMX2021, For OPPO Realme C3 / C3i

(0)

€12,64

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for OPPO Realme C3 / C3i RMX2027 RMX2020 RMX2021.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme Narzo 10 / Realme 6i RMX2040, For OPPO Realme 6i

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme Narzo 10 / Realme 6i RMX2040, For OPPO Realme 6i

(0)

€12,85

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for OPPO Realme Narzo 10 / Realme 6i RMX2040.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 6 RMX2001, For OPPO Realme 6

LCD Screen and Digitizer Full Assembly with Frame for OPPO Realme 6 RMX2001, For OPPO Realme 6

(0)

€14,39

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly (with Frame) for OPPO Realme 6 RMX2001.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for Xiaomi Redmi 10 Prime / Redmi 10 / Redmi 10 2022, For Xiaomi Redmi 10 Prime / Redmi 10 (Original)

Original LCD Screen and Digitizer Full Assembly for Xiaomi Redmi 10 Prime / Redmi 10 / Redmi 10 2022, For Xiaomi Redmi 10 Prime / Redmi 10 (Original)

(0)

€16,48

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Xiaomi Redmi 10 Prime / Redmi 10 / Redmi 10 2022
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Xiaomi: Redmi 10 2022 , Redmi 10 Prime , Redmi 10

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Esplora categorie simili