Ricambi Smartphone, Tablet e Dispositivi | 16e88 – Page 317

	__ __
Descrizione	Descrizione - __
Valutazione	Valutazione - __
Colore	Colore - __
	View full details

Earpiece Speaker for Google Pixel 5 5G, For Google Pixel 5 5G

Earpiece Speaker for Google Pixel 5 5G, For Google Pixel 5 5G

(0)

€0,63

Earpiece Speaker for Google Pixel 4a 5G, For Google Pixel 4a 5G

(0)

€0,63

Earpiece Speaker for Google Pixel 4 XL, For Google Pixel 4 XL

(0)

€0,92

Charging Port Flex Cable For Google Pixel 3a, For Google Pixel 3a

(0)

€1,67

Charging Port Flex Cable For Google Pixel 3a XL, For Google Pixel 3a XL

(0)

€1,67

Charging Port Board for Asus ZenFone Max Pro M2 ZB630KL, For Asus ZenFone Max Pro M2 ZB630KL

Charging Port Board for Asus ZenFone Max Pro M2 ZB630KL, For Asus ZenFone Max Pro M2 ZB630KL

(0)

€1,79

LCD Flex Cable for Asus ZenFone Max Pro M2 ZB630KL, For Asus ZenFone Max Pro M2 ZB630KL

LCD Flex Cable for Asus ZenFone Max Pro M2 ZB630KL, For Asus ZenFone Max Pro M2 ZB630KL

(0)

€1,50

Fingerprint Sensor Flex Cable For Asus Zenfone Max Pro M1 ZB602KL ZB601KL, For Asus Zenfone Max Pro M1 ZB602KL

(0)

€3,40

LCD Flex Cable for Asus ZenFone Max Pro M1 ZB601KL ZB602KL, For Asus ZenFone Max Pro M1 ZB601KL ZB602KL

LCD Flex Cable for Asus ZenFone Max Pro M1 ZB601KL ZB602KL, For Asus ZenFone Max Pro M1 ZB601KL ZB602KL

(0)

€1,50

Fingerprint Sensor Flex Cable For Asus Zenfone 5 Lite ZC600KL, For Asus Zenfone 5 Lite ZC600KL

Fingerprint Sensor Flex Cable For Asus Zenfone 5 Lite ZC600KL, For Asus Zenfone 5 Lite ZC600KL

(0)

€4,26

Fingerprint Sensor Flex Cable For Asus Zenfone 4 Selfie Pro ZD552KL, For Asus Zenfone 4 Selfie Pro ZD552KL

Fingerprint Sensor Flex Cable For Asus Zenfone 4 Selfie Pro ZD552KL, For Asus Zenfone 4 Selfie Pro ZD552KL

(0)

€4,26

LCD Screen and Digitizer Full Assembly for ZTE Voyage 10 7530N, For ZTE Voyage 10

LCD Screen and Digitizer Full Assembly for ZTE Voyage 10 7530N, For ZTE Voyage 10

(0)

€10,58

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for ZTE Voyage 10 7530N.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

ZTE: Voyage 10

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for ZTE Blade V30 Vita 8030, For ZTE Blade V30 Vita

LCD Screen and Digitizer Full Assembly for ZTE Blade V30 Vita 8030, For ZTE Blade V30 Vita

(0)

€11,63

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for ZTE Blade V30 Vita 8030.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

ZTE: Blade V30 Vita

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for ZTE Blade A71 (2021) A7030, For ZTE Blade A71 (2021) A7030

LCD Screen and Digitizer Full Assembly for ZTE Blade A71 (2021) A7030, For ZTE Blade A71 (2021) A7030

(0)

€10,05

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for ZTE Blade A71 (2021) A7030.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

ZTE: Blade A71

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Complete Assembly for ZTE Blade A51 (2021), For ZTE Blade A51 (2021)

LCD Screen and Digitizer Complete Assembly for ZTE Blade A51 (2021), For ZTE Blade A51 (2021)

(0)

€10,05

Product information
1. Replacement LCD display + touch screen digitizer assembly for ZTE Blade A51 (2021).
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

ZTE: Blade A51

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Complete Assembly for ZTE Blade A31 (2021), For ZTE Blade A31 (2021)

LCD Screen and Digitizer Complete Assembly for ZTE Blade A31 (2021), For ZTE Blade A31 (2021)

(0)

€12,10

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD display + touch screen digitizer assembly for ZTE Blade A31 (2021).
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

ZTE: Blade A31

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

OLED Material LCD Screen and Digitizer Full Assembly for ZTE Axon 30 Ultra 5G, For ZTE Axon 30 Ultra 5G

OLED Material LCD Screen and Digitizer Full Assembly for ZTE Axon 30 Ultra 5G, For ZTE Axon 30 Ultra 5G

(0)

€30,16

Product information
1. Replacement LCD display + touch screen digitizer assembly (OLED material) for ZTE Axon 30 Ultra 5G.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

ZTE: Axon 30 Ultra 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for Lenovo ideaPad Flex 5-14IIL05 5-14ARE05 5-14ITL05 5-14ALC05 80X1 81X2 82HS 82HU, For Lenovo ideaPad Flex 5-14IIL05

LCD Screen and Digitizer Full Assembly with Frame for Lenovo ideaPad Flex 5-14IIL05 5-14ARE05 5-14ITL05 5-14ALC05 80X1 81X2 82HS 82HU, For Lenovo ideaPad Flex 5-14IIL05

(0)

€123,49

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Lenovo ideaPad Flex 5-14IIL05 5-14ARE05 5-14ITL05 5-14ALC05 80X1 81X2 82HS 82HU.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the device.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is highly recommended to test before installation. Please simulate testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force it to install in your device. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

Lenovo: IdeaPad Flex 5

package weight

Weight of each package

1.92kgs / 4.23lb

One size fits all product

46cm * 30cm * 11cm / 18.11inch * 11.81inch * 4.33inch

Quantity of a box

5

Weight of a box

10.50kgs / 23.15lb

Dimensions of a box

48cm * 32cm * 57cm / 18.9inch * 12.6inch * 22.44inch

Goods counter

20GP: 304 Box * 5 Piece = 1520 Piece
40HQ: 707 Box * 5 Piece = 3535 Piece

OLED LCD Screen and Digitizer Full Assembly with Frame for Lenovo ThinkPad X1 Yoga 1st Gen 2nd Gen, For Lenovo ThinkPad X1 Yoga 1st Gen 2nd Gen

OLED LCD Screen and Digitizer Full Assembly with Frame for Lenovo ThinkPad X1 Yoga 1st Gen 2nd Gen, For Lenovo ThinkPad X1 Yoga 1st Gen 2nd Gen

(0)

€144,86

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the device.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is highly recommended to test before installation. Please simulate testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force it to install in your device. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Lenovo ThinkPad X1 Yoga 1st Gen 2nd Gen 20FQ 20FR 20JD 20JE 20JF 20JG 01AW977 01AX899.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

ThinkPad: X1 Yoga 2017 , X1 Yoga 2016

package weight

Weight of each package

0.82kgs / 1.81lb

One size fits all product

45cm * 31cm * 9cm / 17.72inch * 12.2inch * 3.54inch

Quantity of a box

10

Weight of a box

9.00kgs / 19.84lb

Dimensions of a box

52cm * 46cm * 32cm / 20.47inch * 18.11inch * 12.6inch

Goods counter

20GP: 348 Box * 10 Piece = 3480 Piece
40HQ: 808 Box * 10 Piece = 8080 Piece

1920x1080 LCD Screen and Digitizer Full Assembly with Frame for HP Pavilion X360 Convertible 14-DY 14m-BY, For HP Pavilion X360

1920x1080 LCD Screen and Digitizer Full Assembly with Frame for HP Pavilion X360 Convertible 14-DY 14m-BY, For HP Pavilion X360

(0)

€110,04

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Bezel for HP Pavilion X360 Convertible 14-DY 14m-BY.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the device.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is highly recommended to test before installation. Please simulate testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force it to install in your device. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

package weight

Weight of each package

1.92kgs / 4.23lb

One size fits all product

46cm * 30cm * 11cm / 18.11inch * 11.81inch * 4.33inch

Quantity of a box

5

Weight of a box

10.50kgs / 23.15lb

Dimensions of a box

48cm * 32cm * 57cm / 18.9inch * 12.6inch * 22.44inch

Goods counter

20GP: 304 Box * 5 Piece = 1520 Piece
40HQ: 707 Box * 5 Piece = 3535 Piece

LCD Screen and Digitizer Full Assembly with Frame for Lenovo ThinkPad 11e Yoga Gen 6 20SE 20SF, For Lenovo ThinkPad 11e Yoga Gen 6

LCD Screen and Digitizer Full Assembly with Frame for Lenovo ThinkPad 11e Yoga Gen 6 20SE 20SF, For Lenovo ThinkPad 11e Yoga Gen 6

(0)

€110,42

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Lenovo ThinkPad 11e Yoga Gen 6 20SE 20SF.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside the device.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is highly recommended to test before installation. Please simulate testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force it to install in your device. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

ThinkPad: 11th Yoga Gen 6

package weight

Weight of each package

0.82kgs / 1.81lb

One size fits all product

45cm * 31cm * 9cm / 17.72inch * 12.2inch * 3.54inch

Quantity of a box

10

Weight of a box

9.00kgs / 19.84lb

Dimensions of a box

52cm * 46cm * 32cm / 20.47inch * 18.11inch * 12.6inch

Goods counter

20GP: 348 Box * 10 Piece = 3480 Piece
40HQ: 808 Box * 10 Piece = 8080 Piece

LCD Screen and Digitizer Full Assembly for Nokia XR20 TA-1368 TA-1362, For Nokia XR20

LCD Screen and Digitizer Full Assembly for Nokia XR20 TA-1368 TA-1362, For Nokia XR20

(0)

€12,70

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia XR20 TA-1368 TA-1362.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Nokia: XR20

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Nokia C30 TA-1357 TA-1377 TA-1369 TA-1360 TA-1359, For Nokia C30

LCD Screen and Digitizer Full Assembly for Nokia C30 TA-1357 TA-1377 TA-1369 TA-1360 TA-1359, For Nokia C30

(0)

€9,55

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia C30 TA-1357 TA-1377 TA-1369 TA-1360 TA-1359.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Nokia: C30

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Nokia X10 TA-1350 TA-1332, For Nokia X10

LCD Screen and Digitizer Full Assembly for Nokia X10 TA-1350 TA-1332, For Nokia X10

(0)

€10,11

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia X10 TA-1350 TA-1332.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Nokia: X10

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Complete Assembly for Nokia C10 TA-1342, For Nokia C10

LCD Screen and Digitizer Complete Assembly for Nokia C10 TA-1342, For Nokia C10

(0)

€9,11

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia C10 TA-1342.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Nokia: C10

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Nokia 1.4, For Nokia 1.4

LCD Screen and Digitizer Full Assembly for Nokia 1.4, For Nokia 1.4

(0)

€9,11

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 1.4.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Nokia: 1.4

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325, For Nokia 5.4

LCD Screen and Digitizer Full Assembly for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325, For Nokia 5.4

(0)

€9,63

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 5.4 TA-1333 TA-1340 TA-1337 TA-1328 TA-1325.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Nokia: 5.4

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Nokia 2.4 TA-1277 TA-1275 TA-1274 TA-1270, For Nokia 2.4

LCD Screen and Digitizer Full Assembly for Nokia 2.4 TA-1277 TA-1275 TA-1274 TA-1270, For Nokia 2.4

(0)

€8,86

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 2.4 TA-1277 TA-1275 TA-1274 TA-1270.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Nokia: 2.4

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original Back Battery Cover for Lenovo Tab P11 Pro, For Lenovo Tab P11 Pro (Original)

Original Back Battery Cover for Lenovo Tab P11 Pro, For Lenovo Tab P11 Pro (Original)

(0)

€4,16

Original Back Battery Cover for Lenovo Tab P10 / TB-X705 / TB-X705L / TB-X705F / TB-X705N, For Lenovo Tab P10 (Original)

Original Back Battery Cover for Lenovo Tab P10 / TB-X705 / TB-X705L / TB-X705F / TB-X705N, For Lenovo Tab P10 (Original)

(0)

€9,10

Original Battery Back Cover for Lenovo Tab 4 10 Plus TB-X704F, TB-X704L, For Lenovo Tab 4 10 Plus (Original)

Original Battery Back Cover for Lenovo Tab 4 10 Plus TB-X704F, TB-X704L, For Lenovo Tab 4 10 Plus (Original)

(0)

€11,87

Original LCD Bezel Front Plate for Lenovo Tab 4 8.0 TB-8504X, TB-8504F, For Lenovo Tab 4 8.0 (Original)

Original LCD Bezel Front Plate for Lenovo Tab 4 8.0 TB-8504X, TB-8504F, For Lenovo Tab 4 8.0 (Original)

(0)

€2,79

Original Battery Back Cover for Lenovo Tab M10 HD TB-X505 X505F TB-X505L X505, For Lenovo Tab M10 HD (Original)

Original Battery Back Cover for Lenovo Tab M10 HD TB-X505 X505F TB-X505L X505, For Lenovo Tab M10 HD (Original)

(0)

€4,06

Original LCD Frame Front Plate for Lenovo Tab M10 HD TB-X505 X505F TB-X505L

Original LCD Frame Front Plate for Lenovo Tab M10 HD TB-X505 X505F TB-X505L

(0)

€4,03

Original middle frame plate for TCL 20L / 20 Lite T774H, T774B, For TCL 20L / 20 Lite (Original), For TCL 20L / 20 Lite (Original)

Original middle frame plate for TCL 20L / 20 Lite T774H, T774B, For TCL 20L / 20 Lite (Original), For TCL 20L / 20 Lite (Original)

(0)

€2,81

Original Back Battery Cover for TCL 20L / 20 Lite T774H, T774B, For TCL 20L / 20 Lite (Original)

Original Back Battery Cover for TCL 20L / 20 Lite T774H, T774B, For TCL 20L / 20 Lite (Original)

(0)

€4,06

Original battery back cover for TCL 20 R 5G, For TCL 20 R 5G (Original)

Original battery back cover for TCL 20 R 5G, For TCL 20 R 5G (Original)

(0)

€2,81

Original battery back cover for TCL 20S, For TCL 20S (Original)

Original battery back cover for TCL 20S, For TCL 20S (Original)

(0)

€2,83

Original central frame plate for TCL 20 SE T671H, For TCL 20 SE (Original)

Original central frame plate for TCL 20 SE T671H, For TCL 20 SE (Original)

(0)

€4,23

Original battery back cover for TCL 20 SE T671H, For TCL 20 SE (Original)

Original battery back cover for TCL 20 SE T671H, For TCL 20 SE (Original)

(0)

€2,81

Original Front Housing LCD Bezel Plate For TCL 20 SE T671H, For TCL 20 SE (Original)

Original Front Housing LCD Bezel Plate For TCL 20 SE T671H, For TCL 20 SE (Original)

(0)

€2,81

Original Battery Back Cover for TCL 20 5G T781, T781K, T781H, For TCL 20 5G (Original)

Original Battery Back Cover for TCL 20 5G T781, T781K, T781H, For TCL 20 5G (Original)

(0)

€2,83

Original central frame plate for TCL 10 SE T766H_EEA, For TCL 10 SE (Original)

Original central frame plate for TCL 10 SE T766H_EEA, For TCL 10 SE (Original)

(0)

€4,23

Original Battery Back Cover for TCL 10 SE T766H_EEA, For TCL 10 SE (Original)

Original Battery Back Cover for TCL 10 SE T766H_EEA, For TCL 10 SE (Original)

(0)

€2,81

For Nokia G11 / G21 Original LCD Frame Bezel Plate Front Housing, For Nokia G11 / G21

For Nokia G11 / G21 Original LCD Frame Bezel Plate Front Housing, For Nokia G11 / G21

(0)

€6,15

LCD Screen and Digitizer Full Assembly for Huawei Y Max, For Huawei Y Max

LCD Screen and Digitizer Full Assembly for Huawei Y Max, For Huawei Y Max

(0)

€21,56

Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Huawei Y Max.
2. Replace your broken or unusable item with a new one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Huawei: Y Max

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Full Assembly for Honor X10 Max 5G, For Honor X10 Max 5G(Original)

Original LCD Screen and Digitizer Full Assembly for Honor X10 Max 5G, For Honor X10 Max 5G(Original)

(0)

€20,51

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Honor X10 Max 5G.
2. Replace your broken or unusable item with a new one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Honor: X10 Max 5G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LCD Screen and Digitizer Complete Assembly with Frame for Honor 50, For Honor 50, For Honor 50(Original)

Original LCD Screen and Digitizer Complete Assembly with Frame for Honor 50, For Honor 50, For Honor 50(Original)

(0)

€48,31

Product information
1. Replacement LCD display + touch screen digitizer assembly with frame for Honor 50.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

package weight

Weight of each package

0.22kgs / 0.49lb

One size fits all product

25cm * 18cm * 5cm / 9.84inch * 7.09inch * 1.97inch

Quantity of a box

40

Weight of a box

9.00kgs / 19.84lb

Dimensions of a box

50cm * 40cm * 40cm / 19.69inch * 15.75inch * 15.75inch

Goods counter

20GP: 333 Box * 40 Piece = 13320 Piece
40HQ: 773 Box * 40 Piece = 30920 Piece

Original LCD Screen and Digitizer Full Assembly for Huawei Mate 40 Pro+, For Huawei Mate 40 Pro+(Original)

Original LCD Screen and Digitizer Full Assembly for Huawei Mate 40 Pro+, For Huawei Mate 40 Pro+(Original)

(0)

€137,62

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Huawei Mate 40 Pro+.
2. Replace your broken or unusable item with a new one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Huawei: Mate 40 Pro+

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly with Frame for Huawei Mate 30 RS Porsche Design (Without LOGO), For Huawei Mate 30 RS Porsche Design

(0)

€111,44

Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Huawei Mate 30 RS Porsche Design.
2. Replace your broken or unusable item with a new one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.

Size:

General

Compatible with

Huawei: Mate 30 RS Porsche Design

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Esplora categorie simili