Ricambi Smartphone, Tablet e Dispositivi | 16e88 – Page 310

	__ __
Descrizione	Descrizione - __
Valutazione	Valutazione - __
Colore	Colore - __
	View full details

LCD Screen and Digitizer Full Assembly for Infinix Note 8 X692, For Infinix Note 8

LCD Screen and Digitizer Full Assembly for Infinix Note 8 X692, For Infinix Note 8

(0)

€11,33

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Infinix Note 8 X692
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Infinix: Notes 8

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original Super AMOLED LCD Screen and Digitizer Full Assembly for Meizu 17 Pro / 17, For Meizu 17 Pro / 17

Original Super AMOLED LCD Screen and Digitizer Full Assembly for Meizu 17 Pro / 17, For Meizu 17 Pro / 17

(0)

€93,73

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (Super AMOLED Material) for Meizu 17 Pro / 17
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Meizu: 17 Pro , 17

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original OLED LCD Screen and Digitizer Full Assembly for Meizu 18x, For Meizu 18x

Original OLED LCD Screen and Digitizer Full Assembly for Meizu 18x, For Meizu 18x

(0)

€50,47

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (OLED Material) for Meizu 18x
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Meizu: 18x

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A, For Vivo S9(Original)

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A, For Vivo S9(Original)

(0)

€52,95

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (AMOLED Material) for Vivo S9/S10/S10 Pro/S12/V23 5G V2130 V2121A V2162A V2072A
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Live: V23 5G , S12 , S10 Pro , s10 , S9

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo iQOO 7 / iQOO 7 (India) / iQOO Neo5 S / iQOO Neo6 (China) V2196A V2049A I2009, For Vivo iQOO 7 / iQOO 7 (India)

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo iQOO 7 / iQOO 7 (India) / iQOO Neo5 S / iQOO Neo6 (China) V2196A V2049A I2009, For Vivo iQOO 7 / iQOO 7 (India)

(0)

€46,65

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (AMOLED Material) for Vivo iQOO 7 / iQOO 7 (India) /iQOO Neo5 S / iQOO Neo6 (China) V2196A V2049A I2009
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Live: iQOO Neo6 , iQOO Neo5 S , iQOO 7 (India) , iQOO 7

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo iQOO Neo5 V2055A, For Vivo iQOO Neo5

(0)

€46,65

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (AMOLED Material) for Vivo iQOO Neo5 V2055A
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Live: iQOO Neo5

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original Super AMOLED LCD Screen and Digitizer Full Assembly for Vivo iQOO 8, For Vivo iQOO 8 (Original)

(0)

€50,43

Original Super AMOLED LCD Screen and Digitizer Full Assembly for Vivo X70 Pro V2134A, V2105, For Vivo X70 Pro (Original)

(0)

€68,12

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (Super AMOLED Material) for Vivo X70 Pro V2134A, V2105
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Live: X70 Pro

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original LTPO AMOLED LCD Screen and Digitizer Full Assembly for Vivo X70 Pro+, For Vivo X70 Pro+ (Original)

Original LTPO AMOLED LCD Screen and Digitizer Full Assembly for Vivo X70 Pro+, For Vivo X70 Pro+ (Original)

(0)

€121,44

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is okay, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (LTPO AMOLED Material) for Vivo X70 Pro+
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Live: X70 Pro+

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original OLED Material LCD Secondary Screen and Digitizer Full Assembly for Xiaomi Mi Mix Fold, For Xiaomi Mi Mix Fold (Secondary Screen)

Original OLED Material LCD Secondary Screen and Digitizer Full Assembly for Xiaomi Mi Mix Fold, For Xiaomi Mi Mix Fold (Secondary Screen)

(0)

€117,80

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD screen + touch screen digitizer assembly (secondary screen, OLED material) for Xiaomi Mi Mix Fold
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: This is a secondary screen

Size:

General

Compatible with

Xiaomi: My Mix Fold

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED Foldable LCD Main Screen and Digitizer Full Assembly for Xiaomi Mi Mix Fold, For Xiaomi Mi Mix Fold (Main Screen)

Original AMOLED Foldable LCD Main Screen and Digitizer Full Assembly for Xiaomi Mi Mix Fold, For Xiaomi Mi Mix Fold (Main Screen)

(0)

€80,95

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (Main Screen, Foldable AMOLED Material) for Xiaomi Mi Mix Fold
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: This is a main screen

Size:

General

Compatible with

Xiaomi: My Mix Fold

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Infinix Smart 6, For Infinix Smart 6

LCD Screen and Digitizer Full Assembly for Infinix Smart 6, For Infinix Smart 6

(0)

€8,33

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Infinix Smart 6
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Infinix: Smart 6

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Infinix Note 11 Pro X697, For Infinix Note 11 Pro

LCD Screen and Digitizer Full Assembly for Infinix Note 11 Pro X697, For Infinix Note 11 Pro

(0)

€11,33

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Infinix Note 11 Pro X697
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Infinix: Note 11 Pro

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Infinix Hot 10T X689C, For Infinix Hot 10T

LCD Screen and Digitizer Full Assembly for Infinix Hot 10T X689C, For Infinix Hot 10T

(0)

€9,56

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Infinix Hot 10T X689C
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Infinix: Hot 10T

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Infinix Hot 10i X659B, PR652B, X658E, For Infinix Hot 10i

LCD Screen and Digitizer Full Assembly for Infinix Hot 10i X659B, PR652B, X658E, For Infinix Hot 10i

(0)

€8,43

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Infinix Hot 10i X659B, PR652B, X658E
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Infinix: Hot 10i

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Infinix Hot 10s / Hot 10s NFC, For Infinix Hot 10s / Hot 10s NFC

LCD Screen and Digitizer Full Assembly for Infinix Hot 10s / Hot 10s NFC, For Infinix Hot 10s / Hot 10s NFC

(0)

€9,56

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Infinix Hot 10s / Hot 10s NFC X689B, X689, X689D
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Infinix: Hot 10s NFC

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 8P/Spark 8T KG6p KG7H, For Tecno Spark 8P/Spark 8T

LCD Screen and Digitizer Full Assembly for Tecno Spark 8P/Spark 8T KG6p KG7H, For Tecno Spark 8P/Spark 8T

(0)

€8,82

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 8P/Spark 8T KG6p KG7H
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: SPARK 8P

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 18 P CH7n, For Tecno Camon 18 P

LCD Screen and Digitizer Full Assembly for Tecno Camon 18 P CH7n, For Tecno Camon 18 P

(0)

€10,26

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Tecno Camon 18 P CH7n
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Camon 18 P

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 18 CH6, For Tecno Camon 18

LCD Screen and Digitizer Full Assembly for Tecno Camon 18 CH6, For Tecno Camon 18

(0)

€10,26

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Camon 18 CH6
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: CAMON 18

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Pop 5 BD2, BD2p, BD3, BD1, For Tecno Pop 5(TFT)

LCD Screen and Digitizer Full Assembly for Tecno Pop 5 BD2, BD2p, BD3, BD1, For Tecno Pop 5(TFT)

(0)

€9,09

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Pop 5 BD2, BD2p, BD3, BD1
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Pop 5

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Pova 2 LE7, For Tecno Pova 2

LCD Screen and Digitizer Full Assembly for Tecno Pova 2 LE7, For Tecno Pova 2

(0)

€11,37

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Pova 2 LE7
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Pova 2

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 7 Pro, For Tecno Spark 7 Pro

LCD Screen and Digitizer Full Assembly for Tecno Spark 7 Pro, For Tecno Spark 7 Pro

(0)

€8,08

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 7 Pro
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Spark 7 Pro

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 17 Pro CG8, CG8h, For Tecno Camon 17 Pro

LCD Screen and Digitizer Full Assembly for Tecno Camon 17 Pro CG8, CG8h, For Tecno Camon 17 Pro

(0)

€10,60

Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Tecno Camon 17 Pro CG8, CG8h
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.

Size:

General

Compatible with

TECHNICAL: Camon 17 Pro

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 17 CG6, CG6j, For Tecno Camon 17

LCD Screen and Digitizer Full Assembly for Tecno Camon 17 CG6, CG6j, For Tecno Camon 17

(0)

€8,57

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Camon 17 CG6, CG6j
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Camon 17

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 17P CG7, For Tecno Camon 17P

LCD Screen and Digitizer Full Assembly for Tecno Camon 17P CG7, For Tecno Camon 17P

(0)

€10,26

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Camon 17P CG7
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Camon 17P

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 7P KF7j, For Tecno Spark 7P

LCD Screen and Digitizer Full Assembly for Tecno Spark 7P KF7j, For Tecno Spark 7P

(0)

€9,60

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 7P KF7j
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Spark 7P

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro X659B, PR652B, X658E, PR652C, For Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro

LCD Screen and Digitizer Full Assembly for Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro X659B, PR652B, X658E, PR652C, For Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro

(0)

€8,32

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 7/Infinix Hot 10i/Smart 5 Pro X659B, PR652B, X658E, PR652C, KF6, KF6j, KF6i, KF6k, PR651h, PR651, PR651E
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Spark 8T , Spark 7

Infinix: Smart 5 Pro , Hot 10i

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 7T KF6p, For Tecno Spark 7T

LCD Screen and Digitizer Full Assembly for Tecno Spark 7T KF6p, For Tecno Spark 7T

(0)

€8,32

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 7T KF6p
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Spark 7T

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

For Realme GT Neo2T LCD Flex Cable, For Realme GT Neo2T

For Realme GT Neo2T LCD Flex Cable, For Realme GT Neo2T

(0)

€1,02

For Google Pixel 7 Pro 5G original rear camera, For Google Pixel 7 Pro 5G

For Google Pixel 7 Pro 5G original rear camera, For Google Pixel 7 Pro 5G

(0)

€15,33

Boom/Mic/Power Button Flex Cable for Apple Watch Series 7 41mm, For Apple Watch Series 7 41mm

Boom/Mic/Power Button Flex Cable for Apple Watch Series 7 41mm, For Apple Watch Series 7 41mm

(0)

€2,07

LCD Screen and Digitizer Full Assembly for Tecno Camon 16 S, For Tecno Camon 16 S

LCD Screen and Digitizer Full Assembly for Tecno Camon 16 S, For Tecno Camon 16 S

(0)

€8,05

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Tecno Camon 16 S
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Camon 16 S

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 16 Premier CE9, CD6j, For Tecno Camon 16 Premier

LCD Screen and Digitizer Full Assembly for Tecno Camon 16 Premier CE9, CD6j, For Tecno Camon 16 Premier

(0)

€14,17

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Camon 16 Premier CE9, CD6j
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Camon 16 Premier

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Spark 5 Air KD6a, For Tecno Spark 5 Air

LCD Screen and Digitizer Full Assembly for Tecno Spark 5 Air KD6a, For Tecno Spark 5 Air

(0)

€9,07

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Spark 5 Air KD6a
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Spark 5 Air

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Camon 15 Air CD6, CD6S, For Tecno Camon 15 Air

LCD Screen and Digitizer Full Assembly for Tecno Camon 15 Air CD6, CD6S, For Tecno Camon 15 Air

(0)

€8,05

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Tecno Camon 15 Air CD6, CD6S
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

TECHNICAL: Camon 15 Air

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

LCD Screen and Digitizer Full Assembly for Tecno Pop 3 Plus, For Tecno Pop 3 Plus

LCD Screen and Digitizer Full Assembly for Tecno Pop 3 Plus, For Tecno Pop 3 Plus

(0)

€8,32

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement for Tecno Pop 3 Plus
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

TECHNICAL: Pop 3 Plus

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo V21e 4G / Y73 V2061, V2059, For Vivo V21e 4G / Y73

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo V21e 4G / Y73 V2061, V2059, For Vivo V21e 4G / Y73

(0)

€50,43

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (AMOLED Material) for Vivo V21e 4G / Y73 V2061, V2059
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Live: V21e , Y73

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo V21 4G V2066, V2108, For Vivo V21 4G

Original AMOLED LCD Screen and Digitizer Full Assembly for Vivo V21 4G V2066, V2108, For Vivo V21 4G

(0)

€55,47

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or tag. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
Tip 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. More than 90 degrees bent will cause a black display.
Product information
1. LCD Screen + Touch Screen Digitizer Assembly Replacement (AMOLED Material) for Vivo V21 4G V2066, V2108
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Live: V21 4G

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly for Xiaomi Black Shark 4S / Black Shark 4S Pro, For Xiaomi Black Shark 4S / Black Shark 4S Pro

(0)

€12,10

Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for Xiaomi Black Shark 4S / Black Shark 4S Pro
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.

Size:

General

Compatible with

Xiaomi: Black Shark 4s Pro , Black Shark 4s

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT LCD Screen and Digitizer Full Assembly for Xiaomi Black Shark 4 / Black Shark 4 Pro, For Xiaomi Black Shark 4 / Black Shark 4 Pro

TFT LCD Screen and Digitizer Full Assembly for Xiaomi Black Shark 4 / Black Shark 4 Pro, For Xiaomi Black Shark 4 / Black Shark 4 Pro

(0)

€11,68

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for Xiaomi Black Shark 4 / Black Shark 4 Pro
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Xiaomi: Black Shark 4 Pro , Black Shark 4

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT LCD Screen and Digitizer Full Assembly for Xiaomi Mi 11i / Mi 11X / Mi 11X Pro, For Xiaomi Mi 11i / Mi 11X / Mi 11X Pro

TFT LCD Screen and Digitizer Full Assembly for Xiaomi Mi 11i / Mi 11X / Mi 11X Pro, For Xiaomi Mi 11i / Mi 11X / Mi 11X Pro

(0)

€11,63

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for Xiaomi Mi 11i / Mi 11X / Mi 11X Pro
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Size:

General

Compatible with

Xiaomi: My 11X , Mi 11X Pro , My 11i

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box

9.50kgs / 20.94lb

Dimensions of a box

40cm * 36cm * 36cm / 15.75inch * 14.17inch * 14.17inch

Goods counter

20GP: 514 Box * 66 Piece = 33924 Piece
40HQ: 1194 Box * 66 Piece = 78804 Piece

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for OPPO A95 4G / F19s, For OPPO A95 4G / F19s

TFT Material LCD Screen and Digitizer Full Assembly (Not Support Fingerprint Identification) for OPPO A95 4G / F19s, For OPPO A95 4G / F19s

(0)

€10,11

Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly (TFT Material) for OPPO A95 4G / F19s CHP2365, CPH2365, CPH2219, CPH2223
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
7. Note: No fingerprint identification

Size:

General

Compatible with

OPPO: F19s , A95

package weight

Weight of each package

0.15kgs / 0.33lb

One size fits all product

25cm * 13cm * 5cm / 9.84inch * 5.12inch * 1.97inch

Quantity of a box

66

Weight of a box