Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Welcome to 16e88.com
Your cart
Choose your Location
-
websrl
Corso Europa snc, 95014 - Giarre CT
📞 +39 095 938900
🕐 LUN-VEN: 8.30-13.00 e 14.30-18.00
🔒 SAB-DOM: Chiuso
Confronto Prodotti
In cosa si differenziano
|
__ __ |
|
|---|---|
| Descrizione |
Descrizione - __ |
| Valutazione |
Valutazione - __ |
| Colore |
Colore - __ |
|
|
Compare products ( / )
455 products
455 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
€1,75
2. This part is used to replace the damaged or unworkable one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€37,48
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is okay, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 9 PureView.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
| General |
|
| package weight |
|
€3,60
2. Replace the broken or non-working one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,02
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,02
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€0,55
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,76
2. This part is used to replace the damaged or non-working one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€2,76
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€2,76
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€9,38
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 3 TA-1020 TA-1028 TA-1032 TA-1038.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or labels. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Tips 2: Simulate tests
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. If it is bent more than 90 degrees, the display will be black.
| General |
|
| package weight |
|
€0,99
1. Test before installation
When testing, do not remove any protective film or labels. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your finger on flying glass.
2. Simulate tests
Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulate testing, which means mobile phone apart, audio cable connected to the outer glass lens of the screen and the new replacement, power on, testing is finished. If the test is OK, please install it. If it can't be displayed, please contact us for the first time. And please don't force installation in the mobile phone. We will not be responsible once the screen is installed.
Product information
1. Replacement Front Screen Outer Glass Lens for Nokia 5.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
| General |
|
| package weight |
|
€0,70
2. Replace your broken or unworkable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€5,77
2. Replace your broken or unusable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€2,34
2. This part is used to replace the damaged or unworkable one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€1,65
2. Replace the broken or non-working back cover with a new one
3. Each item has been checked and in good condition before shipping
| General |
|
| package weight |
|
€15,86
1. Replacement LCD Display + Touch Screen Digitizer Assembly with Frame for Nokia Lumia 735.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€10,15
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia X7 / 8.1 / 7.1 Plus TA-1131
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€10,32
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia X6 (2018) TA-1099 / Nokia 6.1 Plus
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
| General |
|
| package weight |
|
€10,85
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 5.1 Plus (X5)
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€9,63
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 3.1
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and working
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
| General |
|
| package weight |
|
€9,28
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 7 Plus
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€2,07
2. This part is used to replace the damaged or unworkable one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€8,86
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 6.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€11,59
2. Replace the broken or unworkable rear case cover with a new one
3. Each item has been checked and in good condition before shipping
4. Highly recommend professional installation. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts
| General |
|
| package weight |
|
€9,11
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 2.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€13,97
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 7.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€12,05
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 8 / N8 TA-1012 TA-1004 TA-1052.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€0,43
2. This part is used to replace the damaged or unworkable one.
3. Each item has been checked and in good condition before shipping.
4. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€0,70
| General |
|
| package weight |
|
€0,59
| General |
|
| package weight |
|
€0,60
1) Original part
2) They are sold, not returned
| General |
|
| package weight |
|
€4,16
1. Test before installation
-When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
-Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
-Make sure you wear eye protection and be careful not to cut your finger on flying glass.
2. Simulate tests
-The screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone apart, (motherboard + battery + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can not display, please contact us for the first time. And please do not force installation into the mobile phone. Well, do not be responsible if the mobile phone is damaged during installation.
3.Do not bend the cable excessively
-Please make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Advantages
1. Large stock, fast delivery, can meet large purchase plan
2. Original superior quality.
3. Complete fit and work
4. Provide quality assurance with professional service
| General |
|
| package weight |
|
€3,64
1. Large stock, fast delivery, can meet large purchase plan
2. Original superior quality.
3. Complete fit and work
4. Provide quality assurance with professional service
Notes before installation
- Tips 1: Test before installation
- When testing, do not remove any protective film or labels. Please pay attention to the problem of static electricity.
- Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
- Be sure to wear eye protection and be careful not to cut your finger on flying glass.
- Tips 2: Mock test
- Screen replacement is a very fragile product. We strongly recommend testing before installation. Please simulated test, which means mobile phone apart, (motherboard + battery + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can't display, contact us for the first time. And please do not force installation into the mobile phone. We will not be responsible if the mobile phone is damaged during installation.
- Tips 3: Do not bend the cable excessively
- Make sure the LCD cable is not bent excessively. If it is bent more than 90 degrees, the display will be black.
| General |
|
| package weight |
|
€2,80
1. Test before installation
-When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
-Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
-Make sure you wear eye protection and be careful not to cut your finger on flying glass.
2. Simulate tests
-The screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone apart, (motherboard + battery + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can not display, please contact us for the first time. And please do not force installation into the mobile phone. Well, do not be responsible if the mobile phone is damaged during installation.
3.Do not bend the cable excessively
-Please make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Advantages
1. Large stock, fast delivery, can meet large purchase plan
2. Original superior quality.
3. Complete fit and work
4. Provide quality assurance with professional service
| General |
|
| package weight |
|
€6,45
1. Test before installation
-When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
-Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
-Make sure you wear eye protection and be careful not to cut your finger on flying glass.
2. Simulate tests
-The screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone apart, (motherboard + battery + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, install it. If it can not be displayed, please contact us for the first time. And please do not force installation into the mobile phone. Well, do not be responsible if the mobile phone is damaged during installation.
3.Do not bend the cable excessively
-Please make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Advantages
1. Large stock, fast delivery, can meet large purchase plan
2. Original superior quality.
3. Complete fit and work
4. Provide quality assurance with professional service
| General |
|
| package weight |
|
€10,42
1. Replacement LCD Screen + Touch Screen Digitizer Assembly with Frame for Nokia 2 N2 TA-1007 TA-1029 TA-1023 TA-1035 TA-1011
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€9,10
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Nokia 7.2 / 6.2 / TA-1193 / TA-1178 / TA-1196 / TA-1181
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed
Notes before installation
Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
Tip 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
Tip 3: Don't bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
| General |
|
| package weight |
|
€1,76
2. Replace the broken or non-working one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,78
2. Replace the broken or non-working one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,65
2. Replace your broken or unusable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€11,70
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Screen + Touch Screen Digitizer Assembly with Frame for Nokia 3 TA-1032
2. Replace the old, broken, cracked, damaged one
3. Make your device cooler than ever
4. Fully fit and functioning
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
| General |
|
| package weight |
|
From €6,82
2. Replace the broken or unworkable rear case cover with a new one
3. Each item has been checked and in good condition before shipping
4. Fully fit and working
5. Highly recommend professional installation. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts
| General |
|
| package weight |
|
€1,32
2. Replace your broken or unusable item with a new one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,34
2. Replace your broken, damaged or non-working item with a new one
3. Each item has been checked and in good condition before shipping
4. Fully fit and working
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts
| General |
|
| package weight |
|
€1,46
2. This part is used to replace the damaged or non-working one with a new one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Installation of any new parts must be done by a qualified person. We will not be responsible for any damage caused during installation.
| General |
|
| package weight |
|
€1,82
2. Replace the broken or non-working one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€1,79
2. Replace the broken or non-working one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
€9,04
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Please pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, which means the mobile phone is separated, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If the test is OK, please install it. If it can not display, please contact us for the first time. And please do not force installation in the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for Nokia 3.2.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully fit and working.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
| General |
|
| package weight |
|
€7,88
2. Replace the broken or unworkable rear case cover with a new one
3. Each item has been checked and in good condition before shipping
4. Fully fit and working
5. Highly recommend professional installation. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts
| General |
|
| package weight |
|
€1,76
2. Replace the broken or non-working one.
3. Each item has been checked and in good condition before shipping.
4. Fully fit and working.
5. Professional installation is highly recommended. We will not be responsible for any damage to your cellphone/mobile phone that you may cause when replacing the replacement parts.
| General |
|
| package weight |
|
Showing 350/455
Esplora categorie simili
- Choosing a selection results in a full page refresh.
- Opens in a new window.