JK Soft OLED LCD Screen for iPhone 14, For iPhone 13 (JK Soft OLED)

LCD Screen Features
Specifications:
1. Display type: Soft OLED
2. Resolution: 1170 x 2532
3. Color temperature (k): 6500
4. Brightness (cd/m2): 850
5. Removable IC: Yes
6. True Tone: Yes
Characteristics:
1. 120Hz touch control
2. True Tone Display
3. Ultra thin and ultra light
4. Low energy consumption
5. High brightness 700+-50 cd
6. High contrast ratio 100000:1
Product information
1. Replacement LCD Display + Touch Screen Digitizer Assembly for iPhone 13.
2. Replace the old, broken, cracked, damaged one.
3. Make your device cooler than ever.
4. Fully suitable and functional.
5. Each item has been checked and in good condition before shipping.
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
Notes before installation
1. Tips 1: Test before installation
When testing, do not remove any protective film or label. Pay attention to the problem of static electricity.
Before attempting any repairs, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components inside your phone.
Be sure to wear eye protection and be careful not to cut your fingers on flying glass.
2. Tips 2: Simulate the test
Screen replacement is a very fragile product. It is strongly recommended to test before installation. Please simulate the test, that is, disassemble the mobile phone (motherboard + LCD or screen), connect the audio cable and the new replacement, power on, test finished. If the test is successful, please install it. If it does not display, please contact us at the first time. And please do not force the installation into the mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not bend the cable excessively
Make sure the LCD cable is not bent excessively. Bending more than 90 degrees will cause a black display.