Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Oltre 1 milione di prodotti
Catalogo ampio e sempre aggiornato
Prezzi competitivi ogni giorno
Pagamenti sicuri e ordini tracciabili
Welcome to 16e88.com
Main menu
Spare parts
- Spare parts
-
Ricambi iPhone
- Ricambi iPhone
- Ricambi iPhone 17/Pro/Pro Max
- Ricambi iPhone Air
- Ricambi iPhone 16/16e/Pro/Pro Max/Plus
- Ricambi iPhone 15/Pro/Pro Max/Plus
- Ricambi iPhone 14/Pro/Pro Max/Plus
- Ricambi iPhone 13/Pro/Pro Max/Mini
- Ricambi per iPhone 12/Pro/Pro Max/Mini
- Ricambi per iPhone 11/Pro/Pro Max
- Ricambi per iPhone X/XS/XR/XS Max
- Ricambi per iPhone SE
- Altre parti di ricambio per iPhone
- Display per iPhone
-
Ricambi per Samsung
- Ricambi per Samsung
- Ricambi per Galaxy S25/S25+/S25Ultra/S25FE
- Ricambi per Galaxy S24/S24+/S24Ultra/S24FE
- Ricambi per Galaxy S23/S23+/S23Ultra/S23FE
- Ricambi per Galaxy S22/S22+/S22Ultra
- Ricambi per serie Galaxy S
- Ricambi per serie Galaxy Note
- Ricambi per serie Galaxy A
- Ricambi per serie Galaxy J
- Ricambi per serie Galaxy Z
- Ricambi per serie Galaxy M
- Ricambi per serie Galaxy Tab
- Ricambi per Galaxy
- Accessori di manutenzione
- Tutte le collezioni
- Ricambi per PC portatili Samsung
-
Ricambi per smartphone Android
- Ricambi per smartphone Android
- Ricambi per Huawei
- Ricambi per Vivo
- Ricambi per Oppo
- Ricambi per TECNO
- Ricambi itel
- Ricambi per Infinix
- Ricambi per Alcatel
- Ricambi per OnePlus
- Ricambi per Motorola
- Ricambi per HTC
- Ricambi per Nokia
- Ricambi per Lenovo
- Ricambi per Sony
- Ricambi per ASUS
- Ricambi per altre mache
- Ricambi per Doogee/Umidigi e altre marche
Telefonia
- Telefonia
-
Accessori Apple
- Accessori Apple
- Accessori per iPhone 17/17Pro/17ProMax
- Accessori per iPhone 16/16Plus/16Pro/16ProMax
- Accessori per iPhone 17e/16e
- Accessori per iPhone Air
- Accessori per iPhone 15/15Plus/15Pro/15ProMax
- Custodie per AirPod
- Accessori per Mac
- Accessori per iPad Pro
- Accessori per iPad Air
- Accessori per altri iPad
- Cover per iPhone
- Custodie per iPad
- Vetri temperati per iPhone
- Vetri temperati per iPad
- Altre protezioni Apple
- Cavi, Caricatori e Adattatori
- Accessori Airtag
- Auricolari Bluetooth
- Altoparlanti Bluetooth
- Accessori per gaming
- Accessori per schede SIM
- Supporti per smartphone
- Accessori per auto
- Tastiere
- Obiettivi e accessori per fotografia
- Gadget
-
Accessori Samsung
- Accessori Samsung
- Accessori per Galaxy S26/S26+/S26Ultra/S26Edge
- Accessori per Galaxy S25/S25+/S25Ultra/S25Edge/S25FE
- Accessori per Galaxy S24/S24+/S24Ultra/S24FE
- Accessori per Galaxy S23
- Accessori per Galaxy Z TriFold
- Accessori per Galaxy Z Fold7 5G
- Accessori per Galaxy Z Flip7 5G
- Accessori per Galaxy Tab S11/S11Ultra
- Accessori per Galaxy Tab S10/S10Ultra
- Accessori per Galaxy Tab A11/A11+
- Cover per Samsung Galaxy
- Vetri temperati per Samsung Galaxy
- Cover per Galaxy Tab
- Vetri temperati per Galaxy Tab
- Accessori Galaxy SmartTag
-
Accessori Xiaomi
- Accessori Xiaomi
- Accessori per Xiaomi 17/17Pro/17ProMax/17Ultra
- Accessori per Xiaomi 15/15Pro/15SPro/15 Ultra
- Accessori per Xiaomi 15T/15TPro
- Accessori per Redmi Note 15/15Pro/15Pro+
- Accessori per Redmi K90/K90 ProMax
- Accessori per Redmi K80 Ultra
- Accessori per Redmi 15/15C
- Accessori per Redmi 14C
- Cover Xiaomi
- Vetri temperati per Xiaomi
- Cover per tablet Xiaomi
- Vetri temperati per tablet Xiaomi
-
Accessori OnePlus, Oppo, Vivo e Realme
- Accessori OnePlus, Oppo, Vivo e Realme
- Accessori per OnePlus 15
- Accessori per OnePlus Ace 6
- Accessori per OnePlus Nord CE5
- Accessori per OnePlus Nord 4
- Accessori per OnePlus Nord CE4 Lite
- Accessori per OPPO Reno14/Reno14 Pro/Reno 14 F
- Accessori per OPPO Find X9/X9+/X9Pro
- Accessori per OPPO Find N5
- Accessori per vivo S30/S30 Pro mini
- Accessori per vivo X300/X300 Pro
- Accessori per vivo iQOO 15
- Cover e vetri temperati per Oneplus
- Cover e vetri temperati per Realme
- Cover e vetri temperati per Oppo
- Cover e vetri temperati per Vivo
-
Accessori per vari smartphone
- Accessori per vari smartphone
- Accessori per Motorola
- Accessori per Google
- Accessori per Huawei
- Accessori per Honor
- Accessori per Nothing
- Accessori per Sony
- Accessori per Nokia
- Accessori per Infinix
- Accessori per Tecno
- Accessori per ZTE
- Accessori per LG
- Accessori per Ulefone
- Accessori per Asus
- Accessori per Alcatel
- Cover per altri smartphone
- Cover per altri tablet
- Cavi, Caricatori e Adattatori
- Vetri temperati e protezioni
- Accessori per Tablet
- Fascia porta smartphone
- Borse porta telefono
Elettronica
- Elettronica
- Elettronica Varia
- Etichette RFID
- Moduli Elettronici
- Walkie Talkie
- Telecomandi
- Stampanti 3D
- Scanner di codici a barre e codificatore
- Stampanti e accessori
- Lenti e microscopi
- Endoscopio digitale
- Power Saver
- Amplificatori
- Batterie Varie
- Attrezzi per test
- Parti DIY e componenti
- Prese e placche da parete
- Spine e prese
Elettronica Varia
Computer e networking
- Computer e networking
-
Computer
-
Cavi video e seriali
Gaming
Giochi
Auto
Casa e Giardino
- Casa e Giardino
-
Accessori e ricambi per aspirapolvere
- Accessori e ricambi per aspirapolvere
- Accessori Dyson
- Accessori per Xiaomi
- Accessori ECOVACS
- Accessori iRobot
- Accessori Roborock
- Accessori Philips
- Accessori Midea
- Accessori ILIFE
- Accessori Shark
- Accessori Tineco
- Accessori Bissell
- Accessori Proscenic
- Accessori Haier
- Accessori Karcher
- Accessori Vorwerk
- Accessori per Samsung
- Accessori DJI
- Accessori NARWAL
- Accessori Puppy
- Accessori ZEKAI
- Accessori Eufy
- Accessori Miele
- Accessori LG
Sport
Sicurezza
Varie
- Varie
-
Accessori per fotocamere
- Accessori per fotocamere
- Supporti, stabilizzatori e accessori vari
- Studio fotografico
- Sfondo
- Illuminazione per studio fotografico
- Controllo remoto
- Accessori underwater
- Borse, custodie e cinghie per fotografia
- Caricabatterie per fotocamere
- Oggetti Fotografici
- Filtri fotocamera
- Pulizia fotocamera
- Treppiedi e monopiedi
- Obiettivi e accessori
- Adattatore di alimentazione AC
- Convertitore/Adattatore a vite
- Cavi e adattatori
- Proteggi schermo LCD
-
Accessori per DJI e GoPro
- Accessori per DJI e GoPro
- DJI Osmo 360
- DJI Mavic Series
- DJI Air Series
- DJI Mini Series
- DJI Neo Series
- DJI Ronin Series
- DJI Phantom Series
- DJI Inspire Series
- DJI FPV Series
- Accessori per controller JDI
- Altri accessori DJI
- Caricatore DJI
- Osmo Mobile Series
- Osmo Nano Series
- Osmo Pocket Series
- Insta360 X Series
- Insta360 GO Series
- Insta360 Ace Series
- Accessori Antigravity
- Monopiede per Autoscatto
- Supporto per GoPro
- GoPro Water Sports
- Kit GoPro
- Custodia protettiva per GoPro
- Accessori per obiettivi GoPro
- Cavi e adattatori GoPro
- Fasce per GoPro
- Batteria e caricabatterie GoPro
Your cart
Choose your Location
-
websrl
Corso Europa 10, 95014 - Giarre CT
📞 +39 095 938900
🕐 LUN-VEN: 8.30-13.00 e 14.30-18.00
🔒 SAB-DOM: Chiuso
Confronto Prodotti
In cosa si differenziano
|
__ __ |
|
|---|---|
| Descrizione |
Descrizione - __ |
| Valutazione |
Valutazione - __ |
| Colore |
Colore - __ |
|
|
Compare products ( / )
487 products
487 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
€14,90
2. Standard Raspberry Pi Pico header, support Raspberry Pi PIO series boards
3. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications
1. Operating voltage: 3.3V / 5V, Logic voltage: 3.3V
2. Resolution: 128x32 pixels
3. Viewing angle: greater than 160 degrees
4. Communication interface: 4-wire SPI, I2C
5. Display panel: OLED
6. Display Size: 55.02 x 13.10mm
7. Pixel size: 0.41 x 0.39mm
8. Driver: SSD1305
9. Dimensions: 52.00 x 25.00mm
| package weight |
|
€4,35
1. SPI-compatible, easy to drive
2. Standard Raspberry PI PIO header, support Raspberry Pi PICO series
3. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Technical specifications:
1. Operating voltage: 5V
2. Numbers: 4
3. LED color: red
4. Driver: 74HC595
5. View Part No.: FJ4401Ah
6. Display size: 0.4 inch
7. Dimensions: 52 x H ?? 21m
| package weight |
|
€21,95
- USB 2.0 x 2
- USB 2.0 x 2 (via FFC connector)
2. GPIO: Raspberry PI 40 Pin GPIO
3. Header: m.2 slot x 1
4. Support HD interface: HDMI X 2, 1x via FFC connector, support 4K 30FPS
5. DSI Display: MIPI DSi X 1 (15pin 1.0mm FPC)
6. CSI Camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC)
7. Power input: 5V
8. Fan: 5V/12V (no fan control)
9. RJ45 Ethernet: Gigabit Ethernet
10. Slot cm4: suitable for all variants of the computing module 4
11. SD card slot: microSD card socket for Compute Modules 4 lite (without EMMC) Variants
12. Dimensions: 85.0 x 56.0mm
| package weight |
|
€15,39
Needless to say, Raspberry PI is powerful enough in most cases, but it is not so good at providing accurate PWM output. You may have tried to control a robotic arm or a hexapod walker using PI, but finally get frustrated due to the limited number of PWM outputs and Servo Jittering. Now you get a new option to bring your ideas to life, let's prepare this useful servo driver for you.
Characteristics
1. Raspberry PI 40PIN standard GPIO extension header, support Raspberry PI series boards, Jetson Nano
2. I2C controlled, using only 2 pins
3. Serper / PWM outputs up to 16 channels, 12-bit resolution for each channel (4096 balance)
4. Integrate 5V regulator, output current up to 3A, can be powered by battery via VIN terminal
5. Standard servo interface, support Common Servo used such as SG90, MG90S, MG996R, etc.
6. Reserved I2C control pin, allows to work with other control boards
7. Comes with development resources and manual (Python examples like Bluetooth/WiFi remote control)
Specifications
1. Power supply: 5V (PI connector) or 6V ~ 12V (VIN terminal)
2. Servo voltage: 5V
3. Logic voltage: 3.3V
4. Driver: PCA9685
5. Control interface: I2C
6. Size: 65mm x 30mm
7. Mounting hole size: 3.0mm
8. Servo supported
This hat can be used to drive minions such as:
- SG90 servo.
- Servo MG90S
- MG996R servo.
List of packages B>
1. Servo Driver Hat X1
2. RPI Screw Pack (2PCS) X1
Note: Raspberry PI and servos are not included.
| package weight |
|
€15,39
Needless to say, Raspberry PI is powerful enough in most cases, but it is not so good at providing accurate PWM output. You may have tried to control a robotic arm or a hexapod walker using PI, but finally get frustrated due to the limited number of PWM outputs and Servo Jittering. Now you get a new option to bring your ideas to life, let's prepare this useful servo driver for you.
Characteristics
1. Raspberry PI 40PIN standard GPIO extension header, support Raspberry PI series boards, Jetson Nano
2. I2C controlled, using only 2 pins
3. Serper / PWM outputs up to 16 channels, 12-bit resolution for each channel (4096 balance)
4. Integrate 5V regulator, output current up to 3A, can be powered by battery via VIN terminal
5. Standard servo interface, support Common Servo used such as SG90, MG90S, MG996R, etc.
6. Reserved I2C control pin, allows to work with other control boards
7. Comes with development resources and manual (Python examples like Bluetooth/WiFi remote control)
Specifications
1. Power supply: 5V (PI connector) or 6V ~ 12V (VIN terminal)
2. Servo voltage: 5V
3. Logic voltage: 3.3V
4. Driver: PCA9685
5. Control interface: I2C
6. Size: 65mm x 30mm
7. Mounting hole size: 3.0mm
8. Servo supported
This hat can be used to drive minions such as:
- SG90 servo.
- Servo MG90S
- MG996R servo.
List of packages B>
1. Servo Driver Hat X1
2. RPI Screw Pack (2PCS) X1
Note: Raspberry PI and servos are not included.
| package weight |
|
| Dimensions of a box | 32cm * 22cm * 22cm / 12.6inch * 8.66inch * 8.66inch |
€24,42
1. 2.9 inch Capacitive Starter Module, 296 ?? 128 Resolution
2. Support 5-point touch, user-defined wake-up gesture
3. No backlight, keep displaying the latest content for a long time even when it turns off
4. Ultra low power consumption, basically the power is only required for refreshing
5. Raspberry PI 40pin standard GPIO extension header, support Raspberry PI series boards
6. Inverted control interface, for connecting with controller boards such as Arduino/STM32, etc.
7. Comes with development resources and manual (examples for Raspberry PI)
Specifications B>
1. Operating voltage: 3.3V / 5V
2. Display color: black, white
3. Resolution: 296 x 128 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial refresh time: 0.3s
8. Full refresh time: 2s
9. Dimensions: 89.10 x 42.70mm
10. Display Size: 66.89 x 29.05mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. Pitch Dot: 0.227 x 0.226mm
| package weight |
|
€63,43
1. POE: Integrates 802.3AF compliant POE circuit (5V / 2.5A)
2. USB: USB 2.0 x 4
3. GPIO: Raspberry PI 40 Pin GPIO
4. Header:
- RS485 x 1
- RS232 x 1
- PCIE GEN 2 x 1
5. HD multimedia interface: HDMI X 2, support 4K 30FPS output
6. DSI Display: MIPI DSi X 2 (15pin 1.0mm FPC)
7. CSI Camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC)
8. Power input: 5V
9. Fan: 5V / 12V (allows speed regulation and measurement)
10. RTC: Real-time clock with battery power and wake-up capability Computing module 4
11. RJ45 Ethernet: Gigabit Ethernet
12. Slot cm4: suitable for all variants of the computing module 4
13. SD card slot: microSD card socket for Compute Modules 4 lite (without EMMC) Variants
14. Dimensions: 124.50 x 108.80mm
List of packages B>
1. Computing module 4 POE Board (B) x 1
2. Metal case (upper and lower) x 1
3. FAN-4010-PWM-12V X 1
4. Screwdriver x 1
5. Screw packaging x 1
6. USB-C 5V 3A Power Adapter X 1
| package weight |
|
€34,06
1. USB:
- USB 2.0 x 2
- USB 2.0 x 2 (via FFC connector)
2. GPIO: Raspberry PI 40 Pin GPIO
3. Header: m.2 slot x 1
4. Support HD interface: HDMI X 2, 1x via FFC connector, support 4K 30FPS
5. DSI Display: MIPI DSi X 1 (15pin 1.0mm FPC)
6. CSI Camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC)
7. Power input: 5V
8. Fan: 5V/12V (no fan control)
9. RJ45 Ethernet: Gigabit Ethernet
10. Slot cm4: suitable for all variants of the computing module 4
11. SD card slot: microSD card socket for Compute Modules 4 lite (without EMMC) Variants
12. Dimensions: 85.0 x 56.0mm
List of packages B>
1. cm4-io-base-b x 1
2. Metal case (upper and lower) x 1
3. FAN-4010-PWM-5V X 1
4. Screwdriver x 1
5. Screw packaging x 1
6. USB-C 5V 3A Power Adapter X 1
| package weight |
|
€31,29
The A7670E Cat-1 HAT is a LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and Edge, with a downlink rate of up to 10Mbps and an uplink rate of 5Mbps. It supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070 series, and the AT commands are mostly compatible with SIM7600 series. It is suitable for IoT applications such as remote information processing, monitoring devices, POS, industrial routers, remote diagnosis and so on.
1. Raspberry PI 40PIN standard GPIO extension header, support Raspberry PI series boards
2. Support protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s) and SSL
3. Support dial-up, phone call, SMS
4. Support LBS base station positioning, can get the approximate location information via mobile network
5. TTS (Text to Speech) feature, Chinese/English texts can be converted into spoken words
6. On-board USB interface, for command testing, network communication and so on
7. On-board audio jack for sound recording, making phone call, listening to the resulting TTS speech, etc.
8. Breakout Common Used Pins of A7670X module, make it easy to connect with host boards like Arduino/STM32
9. SIM card slot, support 1.8V/3V SIM card
10. 2X LED INDICATORS, easy to monitor the operating status
11. Integral voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
12. Come with development resources and manual (examples for Raspberry PI / Arduino / STM32)
Specifications B>
Frequency band
1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20
2. 2G: GSM / GPRS / EDGE: 900/1800 MHz
SMS and audio
1. SMS: Supported types: MT, MO, CB, Text, PDU
2. Storage: USIM Card (CB can not be stored on the SIM card)
3. Audio Feature: Standard 3.5mm audio jack for audio input/output
Others
1. Power supply: 5V
2. Operating voltage: 5V / 3.3V (configured by jumper)
3. Operating temperature: -30 degrees c ~ 80 degrees c
4. Storage temperature: -45 degrees c ~ 90 degrees c
5. Dimensions: 65 x 30.5mm
List of packages B>
1. A7670E Cat-1 Hat x 1
2. LTE Antenna x 1
3. USB-A to USB-C cable X 1
4. RPI Screws Pack x 1
| package weight |
|
€45,01
1. USB:
- USB 2.0 x 2
- USB 2.0 x 2 (via FFC connector)
2. GPIO: Raspberry PI 40 Pin GPIO
3. Header: m.2 slot x 1
4. Support HD interface: HDMI X 2, 1x via FFC connector, support 4K 30FPS
5. DSI Display: MIPI DSi X 1 (15pin 1.0mm FPC)
6. CSI Camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC)
7. Power input: 5V
8. Fan: 5V/12V (no fan control)
9. RJ45 Ethernet: Gigabit Ethernet
10. Slot cm4: suitable for all variants of the computing module 4
11. SD card slot: microSD card socket for Compute Modules 4 lite (without EMMC) Variants
12. Dimensions: 85.0 x 56.0mm
List of packages B>
1. cm4-io-base-b x 1
2. Metal case (upper and lower) x 1
3. FAN-4010-PWM-5V X 1
4. Screwdriver x 1
5. Screw packaging x 1
6. USB-C 5V 3A Power Adapter x 1
| package weight |
|
€45,67
1. The Raspberry Pi Poe+ Hat is a Power Over Ethernet (PoE+) accessory for the Raspberry PI 3B+/4b. Compared with its predecessor Raspberry Pi Poe+ Hat, it features better cooling effect, implementing the 802.3AF/AT standard with larger power supply output of 5V DC/4A, providing enough power for both the Raspberry PI 3B+/4b with maximum load and other peripherals at the same time.
2. Using this little hat and some correct 802.3AF/AT-compliant power sourcing equipment, you can provide both network connection and power for your Raspberry PI in just one Ethernet cable.
Specifications B>
1. PoE Standard: 802.3AF/AT
2. Input voltage: 37-57V DC, class 4 device
3. Output voltage / current: 5V DC / 4A
4. Current meaning: yes
5. Transformer Design: Planar
6. Fan: Controllable brushless cooling fan, delivers 2.2 cfm for processor cooling
7. Fan size: 25 x 25mm
8. Feature: Fully isolated switched mode power supply
9. Compatible with: Raspberry PI 3B+ / 4B
List of packages B>
1. Raspberry Pi Poe + Hat X1
2. Standoffs Pack x1
| package weight |
|
€73,79
1. USB: USB 3.2 GEN1 x 3
2. GPIO: Raspberry PI 40 Pin GPIO
3. HD multimedia interface: HDMI X 2, support 4K 30FPS
4. DSI Display: MIPI DSi X 2 (15pin 1.0mm FPC)
5. CSI Camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC)
6. Power input: 7V - 36V
7. Fan: 5V / 12V (allows speed adjustment and measurement)
8. RTC: Real-time clock with battery power and wake-up capability Computing module 4
9. RJ45 Ethernet: Dual Gigabit Ethernet
10. Slot cm4: suitable for all variants of the computing module 4
11. SD card slot: microSD card socket for Compute Modules 4 lite (without EMMC) Variants
12. Dimensions: 109.0 x 91.5mm
List of packages B>
1. CM4-Dual-Eth-Base x 1
2. Metal case (upper and lower) x 1
3. FAN-4010-PWM-12V X 1
4. Screwdriver x 1
5. Screw packaging x 1
6. Power adapter 12V 2A x 1
| package weight |
|
€51,48
Raspberry Pi.
1. Support Raspbian, 5-point touch, free driver
2. Support Ubuntu/Kali/Win10 IoT, single touch, driver-free
3. Retropie support, free drivers
4. Support all versions of Raspberry PI
PC
Support Windows 10 / 8.1 / 8/7, 5-point touch, Driver
TOUCH CONTROL B>
1. Tap up to 5 dots, depending on your operating system.
2. Tempered glass panel with hardness up to 6h.
List of packages B>
1. 5 inch HDMI LCD (H) V4 X1
2. HDMI cable X1
3. HDMI to Micro HDMI Adapter X1
4. USB Type A plug to Micro B Table Plug X1
5. RPI Screw Pack (4pcs) x1
| package weight |
|
€61,92
1. No backlight, keep displaying the latest content for a long time even when it turns off
2. Ultra low power consumption, basically the power is only required for refreshing
3. SPI interface, requires minimal IO pins
4. 2 user buttons and 1x reset button for easy interaction
5. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Advantages of Eink B>
1. E-paper display uses microcapsule electrophoretic technology for display, the principle is: charged particles suspended in transparent fluid move to the sides of the microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just like traditional printed paper.
2. The e-paper display will clearly display images/texts under the light bulb or natural light, no backlight required and features almost up to 180 degree viewing angle. It is usually used as an e-reader because of the paper-like effect.
Specifications B>
1. Operating voltage: 3.3V
2. Display Color: Red, Black, White
3. Resolution: 800x480 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial update time: N/A
8. Full refresh time: 5s
9. Profile dimensions: 170.2 x 111.2mm
10. Display Size: 163.2 x 97.92mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. Pitch DOT: 0.204 x 0.204 mm
List of packages B>
1. 7.5 inch E-card X1
2. Pico-Epaper-Driver-Board X1
3. Standoff Pack x1
| package weight |
|
€7,06
1. Standard Raspberry Pi PIO header, support Raspberry Pi PIO series
2. Using UART bus, easily convert UART to RS485 or vice versa
3. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Technical specifications:
1. Operating voltage: 3.3V
2. RES485 TRANSCEIVER: SP3485
3. Communication bus: UART
4. Baud rate: 300 ~ 500000bps
Package List:
Pico-2ch-RS485 x1
| package weight |
|
€14,38
Pico-Audio is an audio expansion module designed for Raspberry PI PIO, which incorporates PCM5101A low-power stereo decoder and uses I2S bus for audio signal transmission. It supports wide-range audio sampling rate, allows headphone and speaker output at the same time.
1. Standard Raspberry Pi PIO header, support Raspberry Pi PIO series
2. Standard 3.5mm audio jack, for connecting external headphones
3. Dual channel speaker headers, for direct drive speakers
4. Audio sampling rate 8 ~ 384000Hz
5. Stereo audio effect output
6. Using 3-wire I2, effectively reducing EMI
7. Comes with development resources and manual (Raspberry PI PIO audio playback code, sound card code)
Specifications B>
1. Operating voltage: 5V
2. Logic level: 3.3V
3. Audio decoder: PCM5101A
4. AUDIO BUS: I2S
5. DAC SNR: 106dB
6. Speaker drive: 2.6W/channel (4OHMS BTL)
List of packages B>
1. PICO-AUDIO X1
2. 8OHMS Speaker 5W x1
| package weight |
|
40HQ: 791 Box * 100 Piece = 79100 Piece
€43,76
The Pico-Eval-Board is a comprehensive evaluation solution designed for the Raspberry Pi Pico. With the 3.5-inch 65K colorful LCD display and useful on-board components, this evaluation board allows you to try out almost all the peripherals of the RP2040 chip, eliminating the wiring of messages. It is an ideal choice for the user to quickly get started with the Raspberry Pi Pico, as well as the RP2040 chip.
1. Standard Raspberry Pi PIO header, support Raspberry Pi PICO series boards
2. 3.5 inch resistive touch screen, 65k colorful, bringing clear and vivid display effect
3. Standard 3.5mm audio jack, for headphones or other audio peripherals
4. Micro SD card slot through SDIO interface, faster access speed than SPI interface
5. Integrates battery header and charging circuit, allows it to continue working without wired power supply
6. Other rich resources like Buzzer, Photeresistor and RGB LED...
7. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 5V
2. Touch Type: Resistive
3. Resolution: 480x320 pixels
4. Display color: 65k colorful
5. Communication bus: SPI
6. Display Panel: IPS
7. Display size: 73.44 x 48.96 mm
8. Pixel size: 0.153 x 0.153 mm
9. Controller: ILI9488/XPT2046
10. Dimensions: 86.00 x 57.20 mm
List of packages B>
1. Pico-eval-board x 1
2. Standoff Pack x 1
| package weight |
|
€29,09
1. No backlight, keep displaying the latest content for a long time even when it turns off
2. Ultra low power consumption, basically the power is only required for refreshing
3. SPI interface, requires minimal IO pins
4. On-board voltage translator, compatible with 3.3V/5V MCU
5. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 3.3V / 5V
2. Display color: black, white
3. Resolution: 480x280 pixels
4. Gray scale: 4
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial refresh time: 0.3s
8. Full refresh time: 3s
9. Profile dimensions: 95.3 x 56.9 mm
10. Display size: 81.12 x 47.32mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. Pitch Dot: 0.169 x 0.169 mm
List of packages B>
1. Pico-ePaper-3.7 x 1
2. Standoff Pack x 1
| package weight |
|
€61,92
1. No backlight, keep displaying the latest content for a long time even when it turns off
2. Ultra low power consumption, basically the power is only required for refreshing
3. SPI interface, requires minimal IO pins
4. 2 user buttons and 1x reset button for easy interaction
5. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 3.3V
2. Display color: black, white
3. Resolution: 800x480 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial update time: N/A
8. Full refresh time: 5s
9. Profile dimensions: 170.2 x 111.2mm
10. Display Size: 163.2 x 97.92mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. Pitch DOT: 0.204 x 0.204 mm
Advantages of Eink B>
1. E-paper display uses microcapsule electrophoretic technology for display, the principle is: charged particles suspended in transparent fluid move to the sides of the microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just like traditional printed paper.
2. The e-paper display will clearly display images/texts under the light bulb or natural light, no backlight required and features almost up to 180 degree viewing angle. It is usually used as an e-reader because of the paper-like effect.
List of packages B>
1. 7.5 inch E-card X1
2. Pico-Epaper-Driver-Board X1
3. Standoff Pack x1
| package weight |
|
€22,20
1. Flexible E-Paper Panel, the display section is foldable (Donot Fold the FPC section)
2. No backlight, keep displaying the latest content for a long time even when it turns off
3. Ultra low power consumption, basically the power is only required for refreshing
4. SPI interface, requires minimal IO pins
5. 2 user buttons and 1x reset button for easy interaction
6. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 3.3V
2. Display color: black, white
3. Resolution: 648x480 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial update time: N/A
8. Full refresh time: 5s
9. Dimensions: 59.2 x 29.2mm
10. Display Size: 48.55 x 23.71mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. Dot DOT: 0.229 x 0.228mm
Advantages of Eink B>
1. E-paper display uses microcapsule electrophoretic technology for display, the principle is: charged particles suspended in transparent fluid move to the sides of the microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just like traditional printed paper.
2. The e-paper display will clearly display images/texts under the light bulb or natural light, no backlight required and features almost up to 180 degree viewing angle. It is usually used as an e-reader because of the paper-like effect.
List of packages B>
1. 2.13 inch e-paper (D) x1
2. Pico-Epaper-Driver-Board X1
3. Standoff Pack x1
| package weight |
|
40HQ: 2180 Box * 200 Piece = 436000 Piece
€339,35
This Jetson Nano Communication 5G/4G/3G communication module adopts SIMCOM 5G SIM8200EA-M2 module, supports 5G NSA and SA network, providing the data rate up to 2.4Gbps(DL)/500Mbps(UL).
The baseboard is equipped with a standard M2 connector, allowing you to connect with a 4G or 5G communication module in the M2 package. There are also interfaces on board such as USB3.1 Port, Audio Jack, SIM card slot, etc. Combined with our configuration writing and development resources, it is easy to enable 5G high-speed communication for your Jetson Nano or computer. This 5G module is ideal for quickly evaluating 5G modules, as well as being integrated into types of applications where 5G connection is required.
1. STANDARD 40 PIN GPIO GPIO Header, support direct connection to Jetson Nano
2. Comes with SIM8202G-M2 core module, based on Qualcomm Snapdragon X55 platform, with Multi-Band Multi-mode Support 5G/4G/3G Communication, supports functions like phone call, SMS, cloud communication, etc.
3. USB 3.1 port For testing commands, sending messages, cloud communication, making phone calls, obtaining GNSS positioning data, etc.
4. SIM card slot, support 1.8V/3V SIM card
5. 2X LED indicators, easy to monitor the working status
6. Command support, based on 3GPP TS 27.007, 27.005 and V.25ter command set
7. Audio jack and on-board audio decoder, enables audio operation such as phone call
8. Multi-constellation dual-band positioning: GPS, GLONASS, BEIDOU, GALILEO and QZSS
9. OS Support: Windows / Linux / Android
Specifications B>
1. Frequency band
- Sub-6G (SA): N1, N2, N14, N7, N8, N12, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G -M2)
- SUB-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2)
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B5, B14, B1, B12, B13, B14, B17, B18, B19, B20, B21, B26, B28, B29, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA: B1, B2, B3, B4, B5, B8
- GNSS: GPS, GLONASS, BEIDOU, GALILEO and QZSS
2. Vote on data:
- Sub-6G: 2.4Gbps (DL) / 500Mbps (UL)
- LTE: 1Gbps (DL) / 200 Mbps (UL)
- HSPA: 42 Mbps (DL) / 5.76 Mbps (UL)
3. Software functions:
- Operating Systems: Windows / Linux / Android
- Communication protocols: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTP, HTTP, HTTPS, MQTTS, DNS, SSL3.0
- SMS: Support MT, MO, CB, text, PDU
- Firmware Update: Support firmware Update via USB port
4. Hardware information:
- SIM card: 1.8V / 3.0V
- Power supply: 5V 3A
- Antenna connector: 4x IPEX-4 connector
- Module size: 42.0x30.0x2.3mm
5. Applications:
- Applicable Regions: Sub-6G 5G signal coverage regions including China, US, Japan, South Korea, Europe, Middle East, Latin America, etc.
- Application examples: CPE, Smart Gateway, Drone, Live Streaming, Smart Security
List of packages B>
1. SIMXXXX-M2 4G/5G X1 module base
2. SIM8202G-M2 X1
2. 5G External Antenna X4
3. 5V 3A power adapter x1
4. USB3.0 Double-Cap Cable X1
5. USB 3.0 adapter (c) x1
6. HeatSink X1.
7. Screw package x1
| package weight |
|
€339,35
This Jetson Nano Communication 5G/4G/3G communication module adopts SIMCOM 5G SIM8200EA-M2 module, supports 5G NSA and SA network, providing the data rate up to 2.4Gbps(DL)/500Mbps(UL).
The baseboard is equipped with a standard M2 connector, allowing you to connect with a 4G or 5G communication module in the M2 package. There are also interfaces on board such as USB3.1 Port, Audio Jack, SIM card slot, etc. Combined with our configuration writing and development resources, it is easy to enable 5G high-speed communication for your Jetson Nano or computer. This 5G module is ideal for quickly evaluating 5G modules, as well as being integrated into types of applications where 5G connection is required.
1. STANDARD 40 PIN GPIO GPIO Header, support direct connection to Jetson Nano
2. Comes with SIM8202G-M2 core module, based on Qualcomm Snapdragon X55 platform, with Multi-Band Multi-mode Support 5G/4G/3G Communication, supports functions like phone call, SMS, cloud communication, etc.
3. USB 3.1 port For testing commands, sending messages, cloud communication, making phone calls, obtaining GNSS positioning data, etc.
4. SIM card slot, support 1.8V/3V SIM card
5. 2X LED indicators, easy to monitor the working status
6. Command support, based on 3GPP command set TS 27.007, 27.005 and V.25ter
7. Audio jack and on-board audio decoder, enables audio operation such as phone call
8. Multi-constellation dual-band positioning: GPS, GLONASS, BEIDOU, GALILEO and QZSS
9. OS Support: Windows / Linux / Android
Specifications B>
1. Frequency band
- Sub-6G (SA): N1, N2, N14, N7, N8, N12, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G -M2)
- SUB-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2)
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B5, B14, B1, B12, B13, B14, B17, B18, B19, B20, B21, B26, B28, B29, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA: B1, B2, B3, B4, B5, B8
- GNSS: GPS, GLONASS, BEIDOU, GALILEO and QZSS
2. Vote on data:
- Sub-6G: 2.4Gbps (DL) / 500Mbps (UL)
- LTE: 1Gbps (DL) / 200 Mbps (UL)
- HSPA: 42 Mbps (DL) / 5.76 Mbps (UL)
3. Software functions:
- Operating Systems: Windows / Linux / Android
- Communication protocols: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTP, HTTP, HTTPS, MQTTS, DNS, SSL3.0
- SMS: Support MT, MO, CB, text, PDU
- Firmware Update: Support firmware Update via USB port
4. Hardware information:
- SIM card: 1.8V / 3.0V
- Power supply: 5V 3A
- Antenna connector: 4x IPEX-4 connector
- Module size: 42.0x30.0x2.3mm
5. Applications:
- Applicable Regions: Sub-6G 5G signal coverage regions including China, US, Japan, South Korea, Europe, Middle East, Latin America, etc.
- Application examples: CPE, Smart Gateway, Drone, Live Streaming, Smart Security
List of packages B>
1. SIMXXXX-M2 4G/5G X1 module base
2. SIM8202G-M2 X1
2. 5G External Antenna X4
3. 5V 3A power adapter x1
4. USB3.0 Double-Cap Cable X1
5. USB 3.0 adapter (c) x1
6. HeatSink X1.
7. Screw package x1
| package weight |
|
€330,46
This Jetson Nano Communication 5G/4G/3G communication module adopts SIMCOM 5G SIM8202G-M2 module, supports 5G NSA and SA network, providing the data rate up to 2.4Gbps(DL)/500Mbps(UL).
The baseboard is equipped with a standard M2 connector, allowing you to connect with a 4G or 5G communication module in the M2 package. There are also interfaces on board such as USB3.1 Port, Audio Jack, SIM card slot, etc. Combined with our configuration writing and development resources, it is easy to enable 5G high-speed communication for your Jetson Nano or computer. This 5G module is ideal for quickly evaluating 5G modules, as well as being integrated into types of applications where 5G connection is required.
1. STANDARD 40 PIN GPIO GPIO Header, support direct connection to Jetson Nano
2. Comes with SIM8202G-M2 core module, based on Qualcomm Snapdragon X55 platform, with Multi-Band Multi-mode Support 5G/4G/3G Communication, supports functions like phone call, SMS, cloud communication, etc.
3. USB 3.1 port For testing commands, sending messages, cloud communication, making phone calls, obtaining GNSS positioning data, etc.
4. SIM card slot, support 1.8V/3V SIM card
5. 2X LED indicators, easy to monitor the working status
6. Command support, based on 3GPP command set TS 27.007, 27.005 and V.25ter
7. Audio jack and on-board audio decoder, enables audio operation such as phone call
8. Multi-constellation dual-band positioning: GPS, GLONASS, BEIDOU, GALILEO and QZSS
9. OS Support: Windows / Linux / Android
List of packages B>
1. SIMXXXX-M2 4G/5G X1 module base
2. SIM8202G-M2 X1
2. 5G External Antenna X4
3. 5V 3A power adapter x1
4. USB3.0 Double-Cap Cable X1
5. USB 3.0 adapter (c) x1
6. HeatSink X1.
7. Screw package x1
Specifications B>
1. Frequency band
- Sub-6G (SA): N1, N2, N14, N7, N8, N12, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G -M2)
- SUB-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2)
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B5, B14, B1, B12, B13, B14, B17, B18, B19, B20, B21, B26, B28, B29, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA: B1, B2, B3, B4, B5, B8
- GNSS: GPS, GLONASS, BEIDOU, GALILEO and QZSS
2. Vote on data:
- Sub-6G: 2.4Gbps (DL) / 500Mbps (UL)
- LTE: 1Gbps (DL) / 200 Mbps (UL)
- HSPA: 42 Mbps (DL) / 5.76 Mbps (UL)
3. Software functions:
- Operating Systems: Windows / Linux / Android
- Communication protocols: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTP, HTTP, HTTPS, MQTTS, DNS, SSL3.0
- SMS: Support MT, MO, CB, text, PDU
- Firmware Update: Support firmware Update via USB port
4. Hardware information:
- SIM card: 1.8V / 3.0V
- Power supply: 5V 3A
- Antenna connector: 4x IPEX-4 connector
- Module size: 42.0 ?? 30.0 ?? 2.3 mm
5. Applications:
- Applicable Regions: Sub-6G 5G signal coverage regions including China, US, Japan, South Korea, Europe, Middle East, Latin America, etc.
- Application examples: CPE, Smart Gateway, Drone, Live Streaming, Smart Security
| package weight |
|
€19,43
1. On-board unibody unit power isolation, provides stable isolated voltage, no need extra power for isolated terminal
2. Isolation of the on-board photoelectric device, prevent interference from the external high voltage circuit connected to the relay
3. High quality relay, contact rating: 10A 250V AC or less than or equal to 10A 30V DC
4. ABS protective casing with rail mounting bracket, easy to install, safe to use
5. USB Breakout port and boot pin, make it easy to debug without disassembling the enclosure
6. PWR indicator, RGB LED and passive buzzer outside the case
7. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Working voltage: 5V
2. Relay channel: 8CH
3. Communication protocol: USB
4. Contact form: 1No 1NC
5. Communication interface: micro USB
List of packages B>
1. ABS protective case (upper and lower) x 1
2. Pico-rely-b x 1
3. Screwdriver x 1
4. Screws Pack x 1
| package weight |
|
€24,61
2. Support 5-point touch, user-defined wake-up gesture
3. No backlight, keep displaying the latest content for a long time even when it turns off
4. Ultra low power consumption, basically the power is only required for refreshing
5. SPI/I2C interface, requires minimal IO pins
6. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
| package weight |
|
€53,47
1. No backlight, keep displaying the latest content for a long time even when it turns off
2. Ultra low power consumption, basically the power is only required for refreshing
3. SPI interface, requires minimal IO pins
4. 2 user buttons and 1x reset button for easy interaction
5. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 3.3V
2. Display color: black, white
3. Resolution: 648x480 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial update time: N/A
8. Full refresh time: 5s
9. Size: 125.4x99.5mm
10. Display Dimensions: 119.232x88.320mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. DOT Point: 0.184 x 0.184mm
Advantages of Eink B>
1. E-paper display uses microcapsule electrophoretic technology for display, the principle is: charged particles suspended in transparent fluid move to the sides of the microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just like traditional printed paper.
2. The e-paper display will clearly display images/texts under the light bulb or natural light, no backlight required and features almost up to 180 degree viewing angle. It is usually used as an e-reader because of the paper-like effect.
| package weight |
|
€330,46
This Jetson Nano Communication 5G/4G/3G communication module adopts SIMCOM 5G SIM8202G-M2 module, supports 5G NSA and SA network, providing the data rate up to 2.4Gbps(DL)/500Mbps(UL).
The baseboard is equipped with a standard M2 connector, allowing you to connect with a 4G or 5G communication module in the M2 package. There are also interfaces on board such as USB3.1 Port, Audio Jack, SIM card slot, etc. Combined with our configuration writing and development resources, it is easy to enable 5G high-speed communication for your Jetson Nano or computer. This 5G module is ideal for quickly evaluating 5G modules, as well as being integrated into types of applications where 5G connection is required.
1. STANDARD 40 PIN GPIO GPIO Header, support direct connection to Jetson Nano
2. Comes with SIM8202G-M2 core module, based on Qualcomm Snapdragon X55 platform, with Multi-Band Multi-mode Support 5G/4G/3G Communication, supports functions like phone call, SMS, cloud communication, etc.
3. USB 3.1 port For testing commands, sending messages, cloud communication, making phone calls, obtaining GNSS positioning data, etc.
4. SIM card slot, support 1.8V/3V SIM card
5. 2X LED indicators, easy to monitor the working status
6. Command support, based on 3GPP command set TS 27.007, 27.005 and V.25ter
7. Audio jack and on-board audio decoder, enables audio operation such as phone call
8. Multi-constellation dual-band positioning: GPS, GLONASS, BEIDOU, GALILEO and QZSS
9. OS Support: Windows / Linux / Android
Specifications B>
1. Frequency band
- Sub-6G (SA): N1, N2, N14, N7, N8, N12, N5, N7, N8, N12, N20, N28, N38, N40, N41, N48, N66, N71, N77, N78, N79 (N79 is only available for SIM8202G -M2)
- SUB-6G (NSA): N41, N77, N78, N79 (N79 is only available for SIM8202G-M2)
- LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B5, B14, B1, B12, B13, B14, B17, B18, B19, B20, B21, B26, B28, B29, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD: B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA: B1, B2, B3, B4, B5, B8
- GNSS: GPS, GLONASS, BEIDOU, GALILEO and QZSS
2. Vote on data:
- Sub-6G: 2.4Gbps (DL) / 500Mbps (UL)
- LTE: 1Gbps (DL) / 200 Mbps (UL)
- HSPA: 42 Mbps (DL) / 5.76 Mbps (UL)
3. Software functions:
- Operating Systems: Windows / Linux / Android
- Communication protocols: TCP/IP, IPv4, IPv6, Multi-PDP, FTP, FTP, HTTP, HTTPS, MQTTS, DNS, SSL3.0
- SMS: Support MT, MO, CB, text, PDU
- Firmware Update: Support firmware Update via USB port
4. Hardware information:
- SIM card: 1.8V / 3.0V
- Power supply: 5V 3A
- Antenna connector: 4x IPEX-4 connector
- Module size: 42.0 ?? 30.0 ?? 2.3 mm
5. Applications:
- Applicable Regions: Sub-6G 5G signal coverage regions including China, US, Japan, South Korea, Europe, Middle East, Latin America, etc.
- Application examples: CPE, Smart Gateway, Drone, Live Streaming, Smart Security
List of packages B>
1. SIMXXXX-M2 4G/5G X1 module base
2. SIM8202G-M2 X1
2. 5G External Antenna X4
3. 5V 3A power adapter x1
4. USB3.0 Double-Cap Cable X1
5. USB 3.0 adapter (c) x1
6. HeatSink X1.
7. Screw package x1
| package weight |
|
||||||||
| Dimensions of a box | 62cm * 37cm * 53cm / 24.41inch * 14.57inch * 20.87inch |
| Goods counter |
20GP: 219 Box * 20 Piece = 4380 Piece 40HQ: 509 Box * 20 Piece = 10180 Piece |
€15,39
Pico-UPS-B is a dedicated UPS (uninterruptible Power Supply) module designed for Raspberry Pi Pico. It incorporates LI-PO battery switching charger with power path management and voltage/current monitoring chip, allows you to monitor the battery operating status via I2C bus. In addition, the male pin header allows you to stack other modules on top.
1. Standard Raspberry Pi PIO header, support Raspberry Pi PICO series boards
2. Incorporates LI-PO battery switching charger with dynamic power path management, more stable power supply
3. I2C bus communication, real-time monitoring of battery voltage, current, power and remaining capacity
4. Multiple battery protection circuits: overcharge/discharge protection, over current protection, short circuit protection, short circuit protection and reverse protection, more safe and stable
5. On-board charging indicator, power indicator, easy to check the battery status
6. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Charging voltage: 5V
2. Control bus: I2C
3. Battery support: 600mAh 3.7V lithium battery
4. Size: 60 x 21mm
| package weight |
|
€53,47
1. No backlight, keep displaying the latest content for a long time even when it turns off
2. Ultra low power consumption, basically the power is only required for refreshing
3. SPI interface, requires minimal IO pins
4. 2 user buttons and 1x reset button for easy interaction
5. Comes with development resources and manual (Raspberry PI PIO C/C++ and Micropython examples)
Specifications B>
1. Operating voltage: 3.3V
2. Display color: black, white
3. Resolution: 648x480 pixels
4. Grey Scale: 2
5. Interface: 3-wire SPI, 4-wire SPI
6. Viewing angle: greater than 170 degrees
7. Partial update time: N/A
8. Full refresh time: 5s
9. Size: 125.4x99.5mm
10. Display Dimensions: 119.232x88.320mm
11. Power Refresh: 26.4mW (typ.)
12. Standby current: less than 0.01UA (almost none)
13. DOT Point: 0.184 x 0.184mm
Advantages of Eink B>
1. E-paper display uses microcapsule electrophoretic technology for display, the principle is: charged particles suspended in transparent fluid move to the sides of the microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just like traditional printed paper.
2. The e-paper display will clearly display images/texts under the light bulb or natural light, no backlight required and features almost up to 180 degree viewing angle. It is usually used as an e-reader because of the paper-like effect.
List of packages B>
1. 5.83 inch e-paper x 1
2. Pico-ePaper-Driver-Board x 1
3. Standoff Pack x 1
| package weight |
|
| Quantity of a box | 200 |
€15,85
2. Easily provide wired Gigabit Ethernet connection for devices that do not have Ethernet port or broken NIC, fast data speed, low latency, stable performance, smooth experience for gaming or HD movies.
Technical specifications:
1. Controller: RTL8153
2. ETH Port: RJ45 Gigabit Ethernet
3. USB: USB 3.2 GEN1 (Data speed will be downgraded when connecting with a USB 2.0 port)
4. Network Standard: 10/100 / 1000 Mbps
5. System Support: Win7 / 8 / 8.1 / 10, Mac, Linux, Android
6. Cable length: about 15cm (measured manually, for reference only)
7. Status indicator: Green light keeps on, yellow light keeps flashing
Package List:
1. USB 3.2 GEN1 to Gigabit ETH X 1
2. USB Type Extension Cable X 1
| package weight |
|
Showing 450/487
Esplora categorie simili
- Choosing a selection results in a full page refresh.
- Opens in a new window.