- +39 095938900
- info@16e88.com
- Oltre 1 milione di prodotti
All Departments
- Illuminazione
- Cavi
- Connettività
- Interruttori magnetotermici
- Passacavi
- Scatole e quadri
- Fusibili
- Condensatori
- Indicatori luminosi
- Strumentazione
- Capicorda
- Fascette
- Utensili
- Morsetti
- Varie
- Contattori
- Contatori elettronici
- Pulsanti
- Interruttori elettrici
- Scaricatori di sovratensione
- Interruttori differenziali
- Interruttori di carico
- Automatizzazione e controllo
- Guaine termorestringenti
- Sezionatore
- Nastro isolante
- Energia solare
-
- Ricambi iPhone 16/Pro/Pro Max/Plus
- Ricambi iPhone 15/Pro/Pro Max/Plus
- Ricambi iPhone 14/Pro/Pro Max/Plus
- Ricambi iPhone 13/Pro/Pro Max/Mini
- Ricambi per iPhone 12/Pro/Pro Max/Mini
- Ricambi per iPhone 11/Pro/Pro Max
- Ricambi per iPhone X/XS/XR/XS Max
- Ricambi per iPhone SE
- Altre parti di ricambio per iPhone
- Display per iPhone
- Ricambi per Xiaomi
-
- Ricambi per Huawei
- Ricambi per Vivo
- Ricambi per Oppo
- Ricambi per TECNO
- Ricambi itel
- Ricambi per Infinix
- Ricambi per Alcatel
- Ricambi per OnePlus
- Ricambi per Motorola
- Ricambi per HTC
- Ricambi per Nokia
- Ricambi per Lenovo
- Ricambi per Sony
- Ricambi per ASUS
- Ricambi per altre mache
- Ricambi per Doogee/Umidigi e altre marche
- Ricambi per Google
- Batterie per smartphone
- Ricambi Smartwatch
- Ricambi per computer portatili
- Ricambi per droni DJI
- Ricambi Action camera
- Ricambi per fotocamere digitali
- Ricambi per visori
- Ricambi per console
- Ricambi per Microsoft
- Chipset IC
- Strumenti per riparazione
-
-
- Custodie per AirPod
- Accessori per Mac
- Cover per iPhone
- Vetri temperati per iPhone
- Vetri temperati per iPad
- Custodie per iPad
- Accessori Airtag
- Auricolari Bluetooth
- Altoparlanti Bluetooth
- Accessori per gaming
- Accessori per schede SIM
- Supporti per smartphone
- Tastiere
- Obiettivi e accessori per fotografia
- Gadget
- Custodie iPad tablet
- Custodie iPhone, Smartphone
- Pellicole e vetri temperati
- Adattatori
- Cavi per ricarica e sincronizzazione
- Cavi e adattatori Lightning
- Cavi e adattatori microUSB
- Cavi e adattatori USB type C
- Power banks
- Telefonia fissa
- Alimentatori caricabatterie
- Smartphone
- Articoli vari telefonia
- Supporti per auto
- Smartwatch
-
- Gaming
- Abbigliamento donna
- Abbigliamento uomo
- Abbigliamento per bambini
- Abiti per matrimoni ed eventi
- Abbigliamento per donne in gravidanza
- Intimo
- Abbigliamento e accessori
- Scarpe
- Scarpe per donne
- Scarpe per bambini
- Accessori per scarpe
- Calze
- Cura e salute della persona
- Monitor della salute domestica
- Gioielleria
- Trucco
- Strumenti ausiliari
- Controllo del peso
- Prodotti per travestimenti
- Tatuaggi temporanei
- Rasatura e accessori
- Accessori e capelli
- Cura orale
- Cura unghie
No result found for your search.
-
- Illuminazione
- Cavi
- Connettività
- Interruttori magnetotermici
- Passacavi
- Scatole e quadri
- Fusibili
- Condensatori
- Indicatori luminosi
- Strumentazione
- Capicorda
- Fascette
- Utensili
- Morsetti
- Varie
- Contattori
- Contatori elettronici
- Pulsanti
- Interruttori elettrici
- Scaricatori di sovratensione
- Interruttori differenziali
- Interruttori di carico
- Automatizzazione e controllo
- Guaine termorestringenti
- Sezionatore
- Nastro isolante
- Energia solare
-
-
- Ricambi iPhone 16/Pro/Pro Max/Plus
- Ricambi iPhone 15/Pro/Pro Max/Plus
- Ricambi iPhone 14/Pro/Pro Max/Plus
- Ricambi iPhone 13/Pro/Pro Max/Mini
- Ricambi per iPhone 12/Pro/Pro Max/Mini
- Ricambi per iPhone 11/Pro/Pro Max
- Ricambi per iPhone X/XS/XR/XS Max
- Ricambi per iPhone SE
- Altre parti di ricambio per iPhone
- Display per iPhone
- Ricambi per Xiaomi
-
- Ricambi per Huawei
- Ricambi per Vivo
- Ricambi per Oppo
- Ricambi per TECNO
- Ricambi itel
- Ricambi per Infinix
- Ricambi per Alcatel
- Ricambi per OnePlus
- Ricambi per Motorola
- Ricambi per HTC
- Ricambi per Nokia
- Ricambi per Lenovo
- Ricambi per Sony
- Ricambi per ASUS
- Ricambi per altre mache
- Ricambi per Doogee/Umidigi e altre marche
- Ricambi per Google
- Batterie per smartphone
- Ricambi Smartwatch
- Ricambi per computer portatili
- Ricambi per droni DJI
- Ricambi Action camera
- Ricambi per fotocamere digitali
- Ricambi per visori
- Ricambi per console
- Ricambi per Microsoft
- Chipset IC
- Strumenti per riparazione
-
-
-
- Custodie per AirPod
- Accessori per Mac
- Cover per iPhone
- Vetri temperati per iPhone
- Vetri temperati per iPad
- Custodie per iPad
- Accessori Airtag
- Auricolari Bluetooth
- Altoparlanti Bluetooth
- Accessori per gaming
- Accessori per schede SIM
- Supporti per smartphone
- Tastiere
- Obiettivi e accessori per fotografia
- Gadget
- Custodie iPad tablet
- Custodie iPhone, Smartphone
- Pellicole e vetri temperati
- Adattatori
- Cavi per ricarica e sincronizzazione
- Cavi e adattatori Lightning
- Cavi e adattatori microUSB
- Cavi e adattatori USB type C
- Power banks
- Telefonia fissa
- Alimentatori caricabatterie
- Smartphone
- Articoli vari telefonia
- Supporti per auto
- Smartwatch
-
-
-
- Gaming
-
- Abbigliamento donna
- Abbigliamento uomo
- Abbigliamento per bambini
- Abiti per matrimoni ed eventi
- Abbigliamento per donne in gravidanza
- Intimo
- Abbigliamento e accessori
- Scarpe
- Scarpe per donne
- Scarpe per bambini
- Accessori per scarpe
- Calze
- Cura e salute della persona
- Monitor della salute domestica
- Gioielleria
- Trucco
- Strumenti ausiliari
- Controllo del peso
- Prodotti per travestimenti
- Tatuaggi temporanei
- Rasatura e accessori
- Accessori e capelli
- Cura orale
- Cura unghie
Domande? Contattaci
095 938900
info@16e88.com
Your cart is empty
- Home
- Laboratorio
- Condensatore ESR nel circuito con selezione automatica MESR-100/Ohmmetro basso fino a 0,01-100R Condensatore ESR nel circuito con selezione automatica MESR-100/Ohmmetro basso fino a 0,01-100R
% €-64,15
















Condensatore ESR nel circuito con selezione automatica MESR-100/Ohmmetro basso fino a 0,01-100R
Product SKU: S-DT-0513
Available:
Only 999999 items in stock
999999 items in stock
In stock
Pre-order
Out of stock
€64,15
- Description
- Reviews
Features:
JINGYAN MESR-100 V2 Auto-ranging capacitor ESR and Low Ohm Meter, measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing.
Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
In the market, there is some technique using short pulse method to testing, but the value will be varying vs the capacitance and sometimes reading is different from the manufacturer's value.
What is ESR of capacitor?
There is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance become small, and we can then measure the true series resistor value.
A bad E-capacitor will have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm.
Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing.
During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check
Compare MESR100 old V1 and new V2 Improvement:
1) Change square wave to sine wave 100 KHz, reduce square wave’s high frequency component, and affect the reading passing the test leads and capacitor.
2) Higher Resolution up to 0.001 ohm.
3) 128X64 dot matrix LCD, with more larger value display and information
4) Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.
5) New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk.
6) Use 2X AA battery, more convenience and longer battery life than 9V battery.
7) Support external USB power, using standard micro-USB port.
Specification:
Range
Accuracy (After Zero, tested with 1,10,100R resistor)
Refresh Time (Manual Mode)
Auto mode take 0 to 2s more time depend on value
0.000 to 1.000R 1%+2Digit ~0.4s
1.000 to 10.00R 1%+1Digit ~0.4s
10.00 to 100.0R 2%+1Digit ~0.4s
Accuracy maybe affected by the test lead’s length and contact point resistance.
Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference (Can contact sales’ person for more detail)
1) Accuracy: Up to 1% (detail on above table)
Wide Measurement Range: >1uF (for 0.1uF the error will be larger on equation 1/(2*pi*F*C) @ 100Khz )
2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range
3) Measuring voltage: <~40mV RMS (TESTING VOLTAGE)
4) Clamping voltage: ~0.15V (open voltage)
5) Battery 2X AA 1.5V battery
6) External Power: 5V micro USB
7) Operating current 0.02A
8) Battery Life time: >80 Hours
Operating Introduction:
1) POWER ON
Press and hold the ON/ OFF circle orange button for 2 to 3 second to power on.
Press and release the ON/ OFF button to shut down meter.
2) AUTO/ MANUAL mode:
i) Auto Range:
Press and release the RANGE button and at the first line of LCD will show “AUTO:"
At auto mode meter will automatically select the best range to detect.
ii) Manual Range:
Scroll the manual range from 1R, 10R and 100R range by press and release the RANGE button
In LCD will show MANUAL at first LCD line and show at second line: 0-1R, 1-10R and 10-100R.
3) 1 Key Zero:
Short circuit the test leads’ terminal, cancelling the wire resistance.
Press and release the “ZERO" button, LCD shows “ZERO" and wait the zero disappear.
If you are using the meter array socket, you need to use a short pin to short circuit to set zero.
4) Backlight:
LCD backlight will on during power on
5) Auto Sleep:
Around 10 hours for not testing, it will shut down automatically to save power.
6) OVERFLOW or OL:
Display overflow when the value is out of range, you can check that you are zero correctly.
7) ESR TABLE:
It is for reference only, different manufacturer of capacitor has different ESR, better to test a good cap ESR and compare with what you are testing, usually bad cap with higher ESR few times larger than good one.
8) SOFTWARE ESR:
Put the 25V Electrolytic capacitor value to LCD, and compare,
GOOD if C < XXuF, means the capacitor maybe good condition if it is less than XXuF
9) PLASTIC STAND:
If you don’t use the stand, press and push the lock position
JINGYAN MESR-100 V2 Auto-ranging capacitor ESR and Low Ohm Meter, measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing.
Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer.
In the market, there is some technique using short pulse method to testing, but the value will be varying vs the capacitance and sometimes reading is different from the manufacturer's value.
What is ESR of capacitor?
There is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C), the impedance become small, and we can then measure the true series resistor value.
A bad E-capacitor will have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm.
Using this theory, we can measure the capacitor is bad/ damaged or good in condition.
Because our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test. Because this low testing voltage, it cannot turn on the semiconductor inside a circuit under testing.
During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.
Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check
Compare MESR100 old V1 and new V2 Improvement:
1) Change square wave to sine wave 100 KHz, reduce square wave’s high frequency component, and affect the reading passing the test leads and capacitor.
2) Higher Resolution up to 0.001 ohm.
3) 128X64 dot matrix LCD, with more larger value display and information
4) Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.
5) New plastic case, curve design for hand carrying. New stand for 60 degree stand on desk.
6) Use 2X AA battery, more convenience and longer battery life than 9V battery.
7) Support external USB power, using standard micro-USB port.
Specification:
Range
Accuracy (After Zero, tested with 1,10,100R resistor)
Refresh Time (Manual Mode)
Auto mode take 0 to 2s more time depend on value
0.000 to 1.000R 1%+2Digit ~0.4s
1.000 to 10.00R 1%+1Digit ~0.4s
10.00 to 100.0R 2%+1Digit ~0.4s
Accuracy maybe affected by the test lead’s length and contact point resistance.
Standard test leads is 15cm, for longer test leads need special shielding to affect the EMI inference (Can contact sales’ person for more detail)
1) Accuracy: Up to 1% (detail on above table)
Wide Measurement Range: >1uF (for 0.1uF the error will be larger on equation 1/(2*pi*F*C) @ 100Khz )
2) High Resolution: 4 digit, or 0.001Ohm @ 1 Ohm range
3) Measuring voltage: <~40mV RMS (TESTING VOLTAGE)
4) Clamping voltage: ~0.15V (open voltage)
5) Battery 2X AA 1.5V battery
6) External Power: 5V micro USB
7) Operating current 0.02A
8) Battery Life time: >80 Hours
Operating Introduction:
1) POWER ON
Press and hold the ON/ OFF circle orange button for 2 to 3 second to power on.
Press and release the ON/ OFF button to shut down meter.
2) AUTO/ MANUAL mode:
i) Auto Range:
Press and release the RANGE button and at the first line of LCD will show “AUTO:"
At auto mode meter will automatically select the best range to detect.
ii) Manual Range:
Scroll the manual range from 1R, 10R and 100R range by press and release the RANGE button
In LCD will show MANUAL at first LCD line and show at second line: 0-1R, 1-10R and 10-100R.
3) 1 Key Zero:
Short circuit the test leads’ terminal, cancelling the wire resistance.
Press and release the “ZERO" button, LCD shows “ZERO" and wait the zero disappear.
If you are using the meter array socket, you need to use a short pin to short circuit to set zero.
4) Backlight:
LCD backlight will on during power on
5) Auto Sleep:
Around 10 hours for not testing, it will shut down automatically to save power.
6) OVERFLOW or OL:
Display overflow when the value is out of range, you can check that you are zero correctly.
7) ESR TABLE:
It is for reference only, different manufacturer of capacitor has different ESR, better to test a good cap ESR and compare with what you are testing, usually bad cap with higher ESR few times larger than good one.
8) SOFTWARE ESR:
Put the 25V Electrolytic capacitor value to LCD, and compare,
GOOD if C < XXuF, means the capacitor maybe good condition if it is less than XXuF
9) PLASTIC STAND:
If you don’t use the stand, press and push the lock position
Dimensione:
peso del pacco |
|
Caratteristiche