1. 16.0 megapixel (real 1.3 megapixel) interpolation CMOS sensor lens.
2. 2.4 inch 320*240 pixels TFT LCD screen.
3. Video format: AVI, video resolution: 1280*720/720*480/640*480/320*240.
4. Photo format: JPEG, photo resolution: 12M(4000*3000) / 5M(2592*1944) / 3M(2048*1536) / 1M(1024*768) / VGA(640*480).
5. Support white balance.
6. Audio recorder (microphone), video recording up to 1280*720 pixels.
7. Auto power off function, powered by lithium battery or 4 AA batteries (not included).
8. Focal length: 20cm above.
9. Built-in 64MB flash memory.
10. Support 5 PIN mini USB port, 3.5mm audio port.
11. Support TF card up to 64GB (not included).

1. Remove the pen
2. Write in the designated area
3. Press the remove button to erase the writing content, replace the battery when it is not clean
4. Panel: Clean handwriting
5. Battery: CR2020 button battery

1. SIM8262A-M2 SIMCom 5G Module The Sub-6G module based on Qualcomm Snapdragon X62 adopts 3GPP 5G Release 16
2. SIM8262A-M2 is a multi-band 5G NR/LTE-FDD/LTE-TDD/HSPA+ module, supports R16 5G NSA/SA, data transmission up to 2.4Gbps.
3. It has powerful expansion capabilities and rich interfaces, including PCle, USB3.1, GPIO, etc. This module provides great flexibility and ease of integration for customer applications
4. SIM8262A-M2 adopts M.2 form factor, AT command is compatible with SIM7912G/SIM8200X-M2 series modules. This also minimizes customer investment and shortens time to market
5. It is designed for applications requiring high-throughput data communications under various radio propagation conditions. With its unique combination of performance, safety and flexibility, this module is suitable for many applications.
6. Standard M.2 interface
7. High-throughput data communication
8. The AT command of SIM8262A-M2 is compatible with SIM7912G/SIM8200X-M2 series modules
Specification:
1. 5G Standard: 3GPP R16
2. Chip: Qualcomm Snapdragon X62
3. Sub-6G: n1, n2, n5, n7, n12, n13, n14, n18, n20, n25, n30, n41, n48, n66, n71, n77, n78, n79
4. LTE-FDD: B1, B2, B4, B5, B7, B12, B13, B14, B17, B18, B19, B25, B26, B29, B30, B66, B71
5. LTE-TDD: B38, B41, B42, B43, B46, B48
6. WCDMA: B1, B2, B4, B5, B8
7. GNSS: GPS, GLONASS, Beidou, Galileo and QZSS
8. Operating temperature: -30 to 70 degrees Celsius
9. SIM card: 1.8V/2.95V
10. Antenna: for 3G/4G/5G/GNSS;4 IPEX-4 connectors
11. Power supply: 3.135-4.4v
12. Interface: M.2
13. Applicable areas: CPE, intelligent gateway, drone, live broadcast, telemedicine, intelligent security, etc.
14. Dimensions: 42 x 30 x 2.3 mm
Data Rate:
1. Sub-6G: 2.4Gbps (DL) / 500Mbps (UL)
2. LTE1: Gbps (DL) / 200 Mbps (UL)
3. HSPA+: 42Mbps (DL) / 5.76Mbps (UL)
Software Features:
1. Operating System: Windows/Linux/Android
2. Communication protocol: TCP/IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, MQTTS, DNS, SSL3.0
3. Composition: RNDIS, NDIS, PPP, MBIM
4. Support SMS: MT, MO, CB, Text, PDU
5. Firmware upgrade: Support firmware upgrade via USB port

1. Rated voltage: 12-18V.
2. Rated power: 40W.
3. Resolution: 47K
4. Distortion: 0.4%
5. Size: 15.30 x 10.00 x 3.50 cm; Material: metal.
6. SNR:>=80dB
7. Amplifier type: HIFI amplifier

1. Bluetooth Version: V4.0+EDR
2. Frequency range: 2.4026GHz-2.480GHz
3. Transmission distance: 10M (Transmission distance due to environmental factors and mobile phone Bluetooth devices varies)
4. MIC distance: less than 1m
5. Lithium battery: 3.7V/150mA
6. Charging time: 1 hour
7. Standby time: about 160 hours
8. Continuous working time: about 8 hours
9. Using the latest Bluetooth 4.0 + EDR technology, signal transmission, low power consumption, support for all Bluetooth devices
10. Listen to music wirelessly with built-in Bluetooth technology
11. Fashion design, let music surround your life at any time
12. Hands-free function, truly your hands free
13. Rechargeable lithium-ion battery, long life and working time
14. CSR bluetooth chip type 4.0, Hi-Fi earphone
15. Support power display on iPhone, easy to know when it will be charged
16. DIY design, available to be detachable whenever you want
17. Sound reminder function, easy to set the device according to the sound reminds

1. Connecting the microphone wirelessly, the real-time audio reception is zero delay and a free wireless connection is realized.
2. Automatic pairing, free from shackles. Plug in the receiver and it will automatically connect without cumbersome operations.
3. High-performance wireless microphone technology, stable signal, wireless receiving distance up to 120 meters.
4. Built-in DSP noise reduction chip, anti-interference and effectively identify the original sound.
5. 2.4G transmission frequency, low delay, fully expanded audio channel and stable transmission.
6. 360 degree omnidirectional radio, high sensitivity digital silicon microphone, 99% restored high-definition radio.
7. Parameters:
Input voltage: 5V
Frequency range: 20Hz-20KHz
Signal to noise ratio: greater than 100dB

Basic functions:
1. Zero clearing
2. Reset.
3. mm / inch mode
4. ABS / INC
5. 200SETS SUB DATUM
6. Turn off memory;
7. Center of 1/2
8. Compensation of linear errors
9. Sleep Mode
10. Clear 200 sets SDM DAUM;
11. Calculator
12. Drilling the circumference
13. Oblique line drilling
14. Processing of the inclined plane
15. Circular arc processing
16. Lathe function (correspondence)
17. Gradual processing of the rectangular lumen
18. Digital filter (grinder machine)
19. R Function
20. Radius / diameter function (lathe)
21. Sum Z + y (lathe machine)

Technical parameters:
1. Voltage range: AC 90V-250V / 50HZ-60Hz
2. Power consumption: 25VA
2. Input signal: TTL Square / RS422
3. Input signal frequency: 100khz

1. Technology: electromagnetic digitizer.
2. Full board 10x6 inch, you can get inspiration when drawing your work.
3. The edge thickness is as thin as 0.9cm, which is not only beautiful but also more convenient.
4. 12 large changeable shortcut keys for efficient operation.
5. Type-C interface, positive and negative random insertion, no directional signal transmission, faster and more stable performance.
6. Intelligent passive technology not only intelligently repairs the brush tilt and track detection, but also automatically traces the trajectory of the lines drawn by the user to make it smoother and more natural.
7. High-speed reading of 250 points/sec, one-button eraser function, delay rejection and instant reaction to each action.

Product parameters
Product Model: A15
Interface support: USB
Switch: Yes Switch for Gesture Touch Area Pen: P002 passive pen
Pen pocket: yes
USB cable: Yes (150cm)
Black color
Dimensions (LxWxH): 358 x 200 x 9mm (14x7.9x0.34 inch)
Weight: 536 g
Compatible systems: Windows 10/8/7/Vista/XP (32/64 bit) or later Mac OS 10.6 or later
Detection field: 10 x 6 inches
Unique: 12 large editable shortcuts
Intelligent induction: passive smart pen
Induction level: 81292
Reading speed: 250 points/sec
Reading resolution: 5080LPI
Induction height: 10 mm

Accessories:
VEIKK A15 Graphics Tablet x1
USB cable x1 (Type-C)
Battery-free pen (no need to charge or battery) x1
Pen pocket x1
Nibs x20
Removing the nib x1
Quick Guide x1
Driver Download Reminder x1

Features B>
1. The product has reverse connection protection, it will not burn if it is reversed
2. The lead acid battery lithium battery is universal and can be adjusted through the buttons on the back
3. It can display battery symbol + percentage or battery symbol + voltmeter, the two display modes can be switched at will
4. The product has only two wires, simple wiring, equipped with a wiring socket, and the wire length is 300mm
5. All battery specifications and function selections are set through the buttons on the back, no electrical soldering is required

Specifications B>
1. Working voltage: 10-100V
2. Working current: less than 5mA
3. Sleep Current: 12UA (test 12V)
4. Display: LCD with backlight
5. Suitable for: 3-27 x 3.7V Lithium Batteries; 12V, 24V, 36V, 48V, 60V, 72V, 84V Lead Acid Batteries
6. Dimensions: 61.3 x 33.3 x 13.5 mm
7. Mounting hole size: 58.5 x 28.5mm
8. Wire length: 30cm

1. Strong and resistant
2. Stable, hard
3. Professional recording studio, Monte Shock live
4. Material: 46mm Metal
5. Simple operation, convenient and practical

Product parameters B>
1. Voltage range: AC 95-240V, 50-60Hz
2. Current: 16A
3. Sensor: NCT, 10K
4. Temperature error: + -1 degree Celsius
5. Timing error: less than 1%
6. Temperature control range: 5-35 degrees Celsius
7. Normal working environment Temperature / humidity: -10 ~ 45 degrees Celsius, 5 ~ 95% RH (without water vapor condensation)
8. Power: less than 1.5W
9. Panel material: PC + ABS
10. Install the built-in box: 86mmx86mm / conventional European box
11. Protection class: IP20
12. Button type: capacitive touch button
13. Display: LCD
Product Features B>
1. LCD display, more friendly interface
2. Touch operation buttons, smoother interaction
3. Ultra-thin embedded panel, suitable for all types of walls
4. Edgeless rounded corner design without edges
5. Compatible with standard 86mm square cassettes and 60mm European cassettes to suit all installation environments
Functions function B>
1. Rich function options, Modbus, WiFi, room card, etc., to meet all your needs
2. Strict accuracy of temperature control to provide the desired temperature
3. Power off protection, save all settings safely
4. Provide weather information and humidity display
5. 5 + 1 + 1 Mode Default setting for one week, programmable setting for 6 periods per day, green energy saving, less expense, more intelligent environmental protection
6. Support the creation of local product groups/actions to achieve unlimited centralized/multi-terminal control of the number of products
7. Suitable for Genie Tmall, Amazon Echo, Google Home Control Voice Control

1. Mini body, compact and portable to carry in your pocket.
2. Dual-band display, dual-frequency display, dual standby.
3. Flashlight lighting function.
4. Working function UU, VV, UV.
5. Channel scan table editing function (freely select the channel to participate in scanning)
6. VOX voice control function
7. parameter:
Frequency range: FM: 65-108 MHz; VHF: 136.000-174.00 MHz; UHF: 400-480.00 MHz
Number of channels: 128
Working voltage: DC 7.2V 2800MAH lithium battery
Step frequency: 2.5 / 6.25 / 10 / 12.5 / 20 / 25KHz
Frequency stability: +/- 2.5 PPM
Antenna: 50 Ohm
Dimensions: (110mm x 58mm x 32mm) (Height x Width x Thickness)
Current: less than or equal to 1.4A (4W)
Modulation sensitivity: 8-12mV
Modulation distortion: less than 10%
Modulation limit: broadband less than 5KHz, narrowband less than 2.5KHz
Sub-audio / Digital Sub-audio Frequency Offset: 0.75KHz +/- 50Hz, 0.37KHz +/- 30Hz
Modulation characteristics: 6dB / frequency increase per multiple
Reference sensitivity: -122dBm (12dB SINAD)
Audio power: 1W.
Audio distortion: less than 10%
Modulation reception bandwidth: 5K
Noise suppression: greater than or equal to 65 dB
Adjacent channel selectivity (wideband, narrowband): greater than or equal to 65dB, greater than or equal to 60dB
Intermodulation (broadband, narrowband): greater than or equal to 60dB, greater than or equal to 55dB
Block: greater than or equal to 85dB
Diffusion distance range: about 5-10km in open area, about 3-5km in obstruction
8. Package:
main machine x 1
antenna x 1
battery x 1
Charger x 1
Belt clip x 1
hand cord x 1
manual x 1

1. Durable and reliable.
2. Top opening design does not block the signal.
3. Quicksand type anti-slip structure, not afraid of taking off your hands.
4. Oil resistant and washable.
5. Applicable models:
BN59-01259B, BN59-01259E, BN59-01260A, BN59-01241A, BN59-01242A, BN59-01266A

Characteristics:
1. Original FT232RL and SP485EEN chip on board; fast, stable and reliable communication speed, better compatibility
2. Built-in power isolation on board, providing stable isolation voltage, no additional power supply is needed at the isolation end
3. Built-in on-board digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
4. Built-in TVS (transient voltage suppressor), effectively suppresses overvoltage and transient peak voltage in the circuit, lightning protection and anti-static
5. Built-in automatic recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection and improve shock resistance
6. Built-in 15KV ESD isolation protection and 600W lightning surge protection
7. The RS485/RS422 interface has an onboard 120R terminating resistor, which is enabled by default and can be configured via jumpers
8. 3 LEDs to indicate power and transceiver status
9. Industrial grade railway type ABS shell design, small size, easy installation, high cost performance
Product parameters:
1. Transmission speed: FT232RNL (300bps-3Mbps)
2. Host port: USB
3. Device port: RS485/422
4. Working voltage: 5V
5. Connector: USB-B
6. Protection: 200mA resettable fuse, ESD protection
7. Transmission distance: about 5m
8. Connector: Screw terminal
9. Pin: A+, B-, PE
10. Direction Control: Automatic Hardware Control
11. Protection: 600W lightning protection, 15KV ESD protection (120R balancing resistor on board)
12. Transmission distance: about 1.2km (low speed)
13. Transmission method: Point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
14. LED indicator: PWR: red power indicator, it is on when there is USB connection and voltage is detected; TXD: green TX light, it is on when the USB port is sending data; RXD: blue RX light, when the device port is sending data it lights up
15. Working environment temperature: minus 15-70 degrees Celsius
16. Humidity: 5% -95% RH
17. Operating System: Mac, Linux, Android, WinCE, Windows 10/8.1/8/7/XP
18. Shell: Rail type ABS shell, suitable for 35mm DIN rail
19. Product size: 81.9 × 54.0 × 32.0 mm
20. Weight: 104 grams
Packing list:
-USB to RS485/422 x 1
-1.2m USB-A to USB-B Cable x 1
-Screwdriver x 1

Characteristics
1. UHF wireless in-ear monitoring system.
2. A built-in limiter circuit for stage performance and a wide range of sound eliminates distortion at excessive input levels.
3. Metal panel and body, make it sturdy and durable
4. Provides desktop-level monitoring in an in-ear monitoring and reception system with a wireless range of 80 to 100 m and a frequency range of 550-580 MHz.
5. The signal-to-noise ratio of the dynamic range has been improved, so that the system has excellent anti-interference ability and once again shows the original good sound
Transmitter Specifications
1. Case specification: 1U standard case
2. Material: Metal panel and body case
3. Frequency range: UHF550-580 MHz
4. Frequency range: 25 MHz
5. Transmit output power: 100mW (50 ohm)
6. Audio input: XLR and 6.3mm duplex socket
7. Earphone output: 6.3mm jack, adjustable volume
8. Headphone load impedance: greater than or equal to 16 ohms
9. Voltage current consumption: DC 12V 250mA
10. Antenna interface: TNC jack (50 ohm)
11. Dimensions: 48 x 10.5 x 4.3 cm
Receiver Specifications
1. Oscillation mode: PLL synthesized frequency
2. Wide frequency range: UHF550-580MHz (corresponding transmitter frequency)
3. Frequency range: 25 MHz
4. Operation mode: manual adjustment
5. Reception mode: single tuning.
6. Full frequency response: 80Hz ~ 15KHz +/- 3dB
7. Output power (30 ohms): 2 x 35 mW
8. Headphone load impedance: greater than or equal to 16 ohms
9. Earphone output: 3.5mm jack
10. Power supply: 2 x AA batteries (not included)
11. Dimensions: 8.5 x 6 cm

1. It is both a selfie stick and a stabilizer, with motion stabilization
2. Stabilizer, intelligent anti-shake, shoot large size footage, avoid shaking
3. No APP required, you can use it
4. It can be rotated vertically or horizontally to meet different needs
5. Aluminum alloy tie rod, durable
6. Parameters:
Self-timer:
Bluetooth version: 4.0
Bluetooth transmission distance: 10M
Selfie Battery: CR1632
System: Android 4.3 and above, iOS 5.1 and above
Stabilizer:
Device battery: 450mAh polymer
Working voltage: 3.7V
Working current: about 400mA
Power consumption: 1.4W
Rotation speed control: 100 degrees/sec max
Working time: about 2 hours
Charging voltage: DC5V
Charging current: 450 mA
Charging port: Micro-USB
Rotation angle: 90 degrees/time (automatic/manual)
Standby current: less than 100UA
7. Material: ABS + Aluminum alloy
8. Support mobile phone size: 60-95mm

1. Material: ABS
2. Display mode: 2.8 inch LCD screen display, 320x240 pixels
3. Atmospheric pressure: 86KPA - 106KPA
4. PM detection method: laser scattering
5. Sampling time: 1.5 seconds
6. Detection temperature: -10 to 50 degrees Celsius
7. Relative humidity: 20 to 85 percent
8. Storage temperature: -10 degrees Celsius to 60 degrees Celsius
9. HCHO and TVOC concentration units: MG/M3
10. Power supply: 1500mAh lithium battery
11. Power supply: 5v DC power charging via USB port
12. User adjustable formaldehyde (HCHO) alarm threshold to warn the user of high
13. On-board fan draws ambient air for more accurate real-time results
14. With low battery warning
15. Combined with multiple air sensors and a built-in fan, it can monitor real-time detectable formaldehyde (HCHO), total volatile organic compounds (TVOC), particulate matter <2.5 microns in size (PM2.5/1.0/10), temperature and humidity, with clock and recording function
16. Dimensions: 155x87x35mm
17. Weight: about 280 grams
Packing list:
- Detector x 1
- USB cable x 1
- Manual x 1

1. Pixels: 2.0M
2. Multiple: 50-1000X
3. Focal length: manual focus (0-40mm)
4. Wireless connection: 10m
5. Video format: MPA / AVI
6. USB interface type: USB 2.0
7. Dynamic frame rate: 20-30 f/s brightness
8. Support system: Android 4.4, iOS 9.0, Windows vista / 7/8/10, MacOS X 10.8 or later
9. The microscope also supports a USB interface for connecting to the computer. The larger the screen, the better the display and the clearer the image quality. At the same time, the product supports photo, video and file storage

1. Material: Fireproof PC material
2. Support mobile APP, voice control
3. Time switch function, easy to use
4. The human body sensor detects the movement of the human body, and the intelligent connection turns on the light.
5. Good quality and long life
6. Dimensions: 86x86x36mm

Note: This product must be used with Tuya ZigBee gateway

1. High efficiency, waterproof and self-contained external bracket, easy to install
2. Connect the power management module or other control board that supports 5.5V solar panel charging or power supply, compatible with solar power managers
3. Working voltage: 5.5V
4. Working current: 1000 mA
5. Open circuit voltage: 7.2V
6. Short circuit current: 1090 mA
7. Output interface: Micro USB, USB/Type-C
8. Solar power: 6w
9. Application examples: It can be directly connected to external low-power intelligent electronic devices to support 5.5V solar panels via USB ports, such as monitoring equipment, doorbells, fans, emergency lights, etc.
10. Cable length: 3 meters
11. Dimensions: 225x195x17.6 mm
Installation steps:
1. Install the bracket with the screws included in the package
2. Fix the solar panel on the bracket
3. Adjust the angle of the panel by rotating the knob on the mount to maximize sunlight absorption

1. It is widely used in gas pipeline leak detection, domestic gas prevention, gold mine field, tunnel mine oil and gas exploitation field, dangerous goods storage warehouse, etc.
2. It is convenient for users to safely detect various combustible gases, such as methane, carbon monoxide, gasoline, ethylene oxide, etc.
3. Range: 0-1000 PPM
4. Accuracy: less than or equal to 10% FS (methane)
5. Sensitivity: less than 50 PPM (methane)
6. Response time: less than 2 seconds
7. Preheating time: about 30 seconds

1. Active part: active coil type
2. Pointer material: Zinc-nickel alloy
3. Pointer color: brown
4. Pointer swing direction: left to right
5. Pointer length: 16.5 +/- 1 mm from the end of the needle to the center axis
6. Pointer width: 0.45 +/- 0.05mm
7. Housing material: ABS
8. Larger Magnet: Alnico sintered magnet
9. Frame material: SPCC
10. Enamelled metal material: UOW polyurethane copper wire
11. Direction of use: vertical
12. LED: 12V 50 mA Frosted bulb

Features B>
1. BT4.2 technology, get faster and more stable connection. Power consumption will be reduced, increasing battery life.
2. The fuselage is mini, easy to carry, equipped with 3.5mm headphones, listen to music and read e-books anytime and anywhere. Support most audio file formats MP3, FLAC, APE, OGG, etc.
3. Built-in 8GB internal storage and allows you to download music, movies and e-books to the device. The MP3 player comes with a TF card slot.
4. 1.5 inch color screen display, high sensitive touch key + side button control.
5. Powerful MP3 player with slim, many useful features with music, e-book, FM, voice recorder, video, calendar, alarm, etc.
Specifications B>
1. Model: M188
2. BT Version: 4.2
3. Power supply: DC 5V 1000mA
4. Battery: 400mAh lithium battery
5. Screen: 1.5 inches 240 x 240 pixels
6. Built-in memory: 8GB
7. Working time: 12 hours
8. Play Mode: TF Card (not included)
9. Size: 6.0 x 4.65 x 2.25 cm

Size:

package weight

Weight of each package

0.30kgs / 0.67lb

1. Frequency range:
- FM: 60-108 MHz
- AM: 522-1710 KHz
2. LCD display: temperature, pedometer, heart rate, voice, battery symbol
3. Memory station: 50pcs
4. Backlight color: Orange
5. Lithium battery: 350mAh 3.7V.
6. Stereo separation: >=32dB
7. Product size: 90x40x8.5mm
8. Lock / full station search function
9. Standard accessories: earphone, USB cable, rope, color box, English manual

Characteristics
1. Built for Run-and-gun: To capture those fleeting moments of inspiration, MoveLink II offers all the features you need as a run-and-gun audio kit. Small, because you only need one hand to hold the entire system; convenient, because it has a back clip (compatible with shoe mount) and a built-in microphone for clips and recording. Just grab the kit and go!
2. Audio deserves your creativity: When creative ideas strike, you don't want to ruin them with poor audio quality. Get MoveLink II today and enjoy detailed, professional audio! The system makes a huge leap in sound quality over the built-in microphone of cameras and mobile devices and uses advanced noise cancellation technology, which reduces annoying ambient noise with just one simple press.
3. Control, never so easy: The intuitive display keeps you informed at every stage. With one or more presses, you can easily pair the system, reduce noise, mute or unmute, adjust the volume and so on. The system also has a 3.5mm audio port for real-time monitoring, in case your camera does not have one.
4. 100m Extended Operating Range: With a maximum transmission range of 100 meters, distance will no longer limit your creation. Adopts frequency hopping technology, which ensures a more stable signal and avoids interference even in places with Bluetooth and Wi-Fi traffic.
5. Prepared for Two-Person Scenarios: For conditions where two people need to record at the same time, the dual-channel system can also handle it well. In addition, it has mono/stereo mode to combine or separate the two audio tracks for better post-processing.
6. Ready for All-Day Creation: Built-in lithium-ion battery ensures all-day free creation without interruption. Just after a one-time full charge, the transmitter can work for 10 hours and the receiver for 8 hours.
7. High Compatibility: With the included 3.5mm TRS-TRS and TRS-TRRS cables, the system is compatible with more devices such as smartphones, cameras, computers, tablets and recorders...
8. Two Color Options: The MoveLink II provides black and white colors for your free choice! Whether you want better concealment when recording or just a favorite gear color, there is an option to suit you!
Specifications
Receiver
Simulated output: 3.5mmTRS
Transmitter
1. Sensitivity: -32dB+/-2dB
2. Max. SPL: 110 dB
3. Simulated input: 3.5mm TRS lavalier microphone input
4. Frequency range: 50Hz-20KHz
5. Signal to noise ratio: 70dB or higher
6. Attachment method: Rear clip (installed on the camera hot shoe)
7. Display: TFT display
8. Dynamic range: 90 dBA (microphone preamp)
9. Working range: max.100m (in no shelter situation)
10. Power supply: Built-in lithium battery
11. Working time: RX: about 8 hours; TX: about 10 hours (the working time of
12. TX and RX vary depending on different environments)
Battery capacity: 300mAh
13. Transmission type: 2.4GHz frequency hopping system
14. Sound detection mode: Omnidirectional
15. Working environment: Temperature: -10~50 degrees C
16. Dimensions: Length 50mm x Width 40mm x Thickness 14mm
17. Weight: 27 g
List of packages
1. MoveLink II TX (transmitter) x 1
2. MoveLink II RX (receiver) x 1
3. USB Type-C cable x 2
4. Iron plate x 2
5. 3.5mm TRS-TRS Audio Connection Cable (for Camera) x 1
6. Omnidirectional lavalier microphone x 1
7. 3.5mm TRS-TRRS audio connection cable (for smartphone) x 1