1. Measure the current wind speed, temperature
2. Measure wind speed / maximum wind flow / wind speed
3. Wind flow value 2/3 / average value
4. Selecting wind speed/flow units and temperature units
5. Real-time measurement when connecting USB with computer software
6. Backlight and data hold (Hold)
7. Low battery indication
8. Powered by rechargeable lithium-ion batteries
9. Automatic shutdown setting

1. This infrared thermometer is used to measure the surface temperature of the object, which is applicable for various hot, dangerous or dura-thoracic objects without contact
2. SALARY and quickly
3. Response time 500msec, 95% response
4. Spectral response: 5-14 UM
5. This unit consists of optics, temperature sensor signal amplifier, processing circuit and LCD display. The optics collected the infrared energy emitted by the object and focuses on the sensor. Then the sensor translates the energy into electricity signal. This signal will be revealed to be digital shown on the LCD after the signal amplifier and processing circuit
6. 9V battery (not included)

1. Measure the pH value of the solution
2. Measure the temperature of the solution
3. Keep LCD backlight
4. Data hold
5. Temperature unit switch
6. Clear memory
7. Solution temperature compensation
8. Low battery indication

1. Measure the pH value of the solution
2. Measure the temperature of the solution
3. Keep LCD backlight
4. Data hold
5. Temperature unit switch
6. Clear memory
7. Solution temperature compensation
8. Low battery indication

1. 14 grain varieties to choose from
2. Grain moisture test
3. Standard grain moisture setting
4. Humidity limit and voice prompt
5. Deviation adjustment
6. 4 types of voice reminder
7. Double edge sensors (metal probes)
8. LCD backlight display
9. Low battery warning
10. Automatic stop function
11. 4 x AA battery (not included)

1. 2.49kPa Digital Pressure Gauge, with USB Port
2. Large LCD, Hold Data
3. With differential mode and recording mode
4. Restore and adjust data
5. Low battery indication and automatic shutdown
6. 4 x AAA battery (not included)

1. This thermometer is used to measure the surface temperature of the object, which is applicable for various hot, dangerous or difficult toreach objects without contact safely and quickly.
2. LCD backlit display
3. Switching Celsius/Fahrenheit, auto-off
4. Temperature Range：-50~400 Celsius (-58~752 Fahrenheit)
5. Response time：500msec, 95% response
6. Spectral response：5~14um
7. 2 x 1.5V AAA battery (not included)

1. Automatic calibration to ensure accuracy.
2. Pairing status indication: Observe the pairing icon to learn whether the pairing is successful or not.
3. 10 thickness measurement and recall function, which makes it easier to work at height or work in the wild area.
4. Sound velocity measurement: With a certain thickness for sample hardware to measure the sound velocity, which avoids the additional conversion or table consultation.
5. 12 Speed ​​of sound for different material that also Adjus-
table.
6. Low battery indication
7. Auto power off mode designed to conserve battery life.
8. More than 10000 times long lift keys.
9. The unit has a special memory that retains all its setting even when the power is turned off.
10. Power supply: 3 x 1.5V AAA batteries (not included)

1. Turn on/off the power of the remote controlled appliance via app
2. Timing function
3. Rated voltage: AC 85-230V +/- 10%, 50/60Hz
4. Rated current: 15a
5. Wireless type: 2.4GHz
6. Protocol: IEEE 802.11b/g/n
7. WiFi distance: 45m
8. FREE APP: TuyAsMart or Smart Life
9. Support systems: Android and iOS
10. Works with Alexa Echo and Google Home
11. Product size (D*W*H): 81 x 38 x 52mm

1. Support all IR devices, including air conditioners, TVs, LEDs, fans, DVD players, etc.
2. Support some Tuya RF devices
3. Voice control
4. Learning function (DIY) - Control devices using infrared signals
5. Power supply: DC 5V / 1A
6. Power interface: micro USB
7. Wi-Fi type: 2.4GHz
8. Wi-Fi Standard: IEEE 802.11b/g/n
9. Wireless range: 45m
10. Working current: 800ma
11. Standby current: 40Ma
12. Infrared remote control distance: 8m
13. RF Frequency: 315 - 433 MHz
14. Bluetooth Version: Bluetooth 5.0
15. Operating temperature: -10 - 60 degrees Celsius
16. Operating humidity: 0 - 90%RH (no condensation)
17. Product size (D*W*H): 60 x 60 x 19mm

1. Zigbee control center, support adding multiple sub-devices.
2. USB power supply: 5V 1A
3. Working temperature: -10-55 degrees Celsius
4. Working humidity: 10%-90%
5. Wireless protocol: Zigbee3.0、IEEE 802.15.4
6. Network range: 55m
7. Firmware upqrade: OTA support
8. Product size: 78mm*78mm*25mm
9. Free App: TuyAsmart or Smart Life

1. Zigbee control center, support adding multiple sub-devices.
2. USB power supply: 5V 1A
3. Working temperature: -10-55 degrees Celsius
4. Working humidity: 10%-90%
5. Wireless protocol: Zigbee3.0、IEEE 802.15.4
6. Network range: 55m
7. Firmware upqrade: OTA support
8. Product size: 78mm*78mm*25mm
9. Free App: TuyAsmart or Smart Life
10. Support systems: Android and iOS

Characteristic:
1. It can test the electric field resistance and magnetic field resistance to achieve the optimal test result. It is widely used to test and learn the internal and external electromagnetic radiation situation. Suitable for measuring electromagnetic generated machine, measuring low frequency apparatus and high frequency radiation apparatus.
2. One instrument with dual uses, can test electric field and magnetic field at the same time.
2. Sound light alarm, when the test result exceeds the safe value, the instrument will alarm automatically.
3. Data lock, one-key lock the radiation value, and easily read the value.
4. Measure room temperature: with 2 temperature units (Celsius and Fahrenheit).
5. Radiation assessment, remember whether the radiation value is safe or not.
6. Fashionable design, easy hand operation, it is easy to carry and make field measurement.
Specifications:
1. Material: ABS plastic
2. Unit: V/M (electric field), micro T/mg (magnetic field)
3. Accuracy: electrical: 1V/m, magnetic: 0.01 micro T/0.1mg
4. Range: electric: 1-1999v/m, magnetic: 0.01-99.99 micro T/0.1-999.9mg
5. Alarm threshold: electrical: 40V/m, magnetic: 0.4 micro T/4MG
6. Display: 3-1/2 LCD display
7. Test bandwidth: 5Hz-3500MHz
8. Sampling time: about 0.4 seconds
9. Test mode: bimodule synchronous test
10. Overload indication: maximum value of measuring range on LCD
11. Operating Temperature: 0-50 Celsius Grade
12. Operating humidity: Relative humidity less than 80%
13. Working voltage: 3.7V
14. Power supply: 3.7V 600mAh lithium battery
15. Dimensions: 134 x 61 x 25mm
16. Weight: 131.3G

1. Frequency range: VHF: 136-174MHz UHF: 400-480MHz
2. Channel number: 200
3. Channel spacing: 25kHz, 20k, 12.5k
4. Lock Step: 5khz, 6.25khz, 10khz, 12.5khz, 15khz, 25khz
5. Working voltage: 13.8V DC +/- 15%
6. Squelch Way: CTCSS/DCS/5TONE/2TONE/DTMF
7. Frequency stability: +/- 2.5ppm
8. Operating temperature: -20 ~ + 60 degrees Celsius
9. Dimension: 98 (w) x 35 (h) x 118 (D) mm
10. Weight: 408G

1. Frequency range: VHF: 136-174MHz, UHF: 400-480MHz
2. Number of channels: 200
3. Channel spacing: 25kHz, 20k, 12.5
4. Lock Step: 2.5kHz, 5kHz, 6.25kHz, 10kHz, 12.5kHz, 15kHz, 25kHz
5. Working voltage: 13.8V DC +/- 15%
6. Medium size silencer: CTCSS, DCS, 5 tones, 2 tones, DTMF
7. Frequency stability: add 2.6ppm
8. Working temperature: -20 - +60 degrees Celsius
9. Dimensions: 98 x 43 x 126mm
10. Weight: 448g

1. Frequency range: VHF: 136-174MHz, UHF: 400-480MHz
2. Number of channels: 200
3. Channel spacing: 25kHz, 20k, 12.5k
4. Lock Step: 2.5khz, 5khz, 6.25khz, 10khz, 12.5khz, 15khz, 25khz
5. Working voltage: 13.8V DC +/- 15%
6. Squelch Mode: Carrier/CTCSS/DCS/5TONE/2TONE/DTMF
7. Frequency stability: +/- 2.5ppm
8. Operating temperature: -20 - +60 degrees Celsius
9. Dimensions: 140x43x172mm
10. Weight: 1.03 kg
Packing list:
- 1 x Qyt 980 Plus Car Stereo
- 1 x external microphone
- 1 x Car Power Cable
- 1 x Mounting Bracket
- 1 x screw kit

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 3A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. It is compatible with Bluetooth and can be connected to WiFi, quickly connect to the mobile phone, and the operation steps are simple; It can carry out voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 3A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. Through Bluetooth compatibility, quickly connect to your mobile phone, the operation steps are simple; You can perform voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 16A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. Through Bluetooth compatibility and WiFi connection, quickly connect to your mobile phone, the operation steps are simple; You can perform voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 16A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. Through Bluetooth compatibility, quickly connect to your mobile phone, the operation steps are simple; You can perform voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 3A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. It is compatible with Bluetooth and can be connected to WiFi, quickly connect to the mobile phone, and the operation steps are simple; It can carry out voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. Power: less than 1.5W
2. Temperature sensor: NTC3950, 10K
3. Temperature error: +/- 1 degree Celsius
4. Power consumption: less than 1.5W
5. Current load: 3A
6. Voltage: AC 95-240V 50-60Hz
7. Ambient temperature: 0-45 degrees Celsius
8. Temperature range: 5-45 degrees Celsius
9. Ambient Humidity: 5-95% relative humidity (non-condensing)
10. Protection level: IP20
11. Installation box: 60mm European round box
12. Dimensions: 131x75x37.5mm
Characteristics:
1. Suitable for electric heating, pipes and wall cabinets
2. Applicable system: The floor heating thermostat supports IOS and Andriod System application system
3. The thermostat can be controlled by your mobile phone anytime and anywhere. When you connect the thermostat with your mobile phone, the thermostat will display the local time, habits and humidity, and check the current status through the app
4. PC + ABS flame retardant shell, safe to use
5. LCD display, 2.5D ARC SAMFER + 13mm ultra-thin built-in panel, suitable for various wall spaces
6. Store data when power is off, no need to worry about power off
7. 7 programmable periods 5 + 1 + 1, which can improve comfort and energy saving strategies and adapt your home heating to your life
8. Through Bluetooth compatibility, quickly connect to your mobile phone, the operation steps are simple; You can perform voice control of smart home integration and heating. Just give voice commands to turn the thermostat on and off, and even set it to a specific temperature as needed
9. Support local data package/sharing, centralized control
10. App remote control, send you the current indoor temperature information, no matter where you are and how well it is, you can freely control the indoor temperature
11. Other functions: manual mode in programming mode, temperature calibration, child lock, anti-freeze function, high temperature protection, initial temperature difference, etc.

1. DIN-SQUARE: 35mm
2. Material: PC v0
3. Input: 100-240V AC 50/60Hz
4. Output: 100-240V AC 50/60Hz
5. Resistive load: 2200W 10A / Gang, 3300W 15A / Total
6. Motor load: 10-240W 1A
7. WiFi: IEEE 802.11 B/G/N 2.4GHz
8. Multiple protection, safe and reliable
9. This switch makes your electrical appliances smart, as long as your mobile phone has a network, you can remotely turn on or off the device anytime and anywhere
10. By setting a schedule for your device, you can maintain a carefree life

1. Projection technology: LCD
2. Physical resolution: 1920*1080p
3. Brightness: 400 Ansi Lumens
4. Light source life: 20,000 h
5. Light source: LED
6. Contrast ratio: 2000:1
7. Throw ratio: 1.6:1
8. Uniformity: greater than 75%
9. Power consumption of the whole machine: 150W / LED: 100W
10. Speaker: 4 ohm 5w * 2
11. Projection size: 50-150 inches
12. Projection distance: 1-6m
13. The original projection ratio: 16:9
14. System: Android 6.0 1+8G system
15. Keystone Correction: Electronic Keystone Correction
16. Interface: 1 * HDMI input, 2 * USB audio output, 1 * 3 * 3.5mm, 1 * AV input, 1 * power port 1 *
17. Built-in high-quality sound effects, left and right stereo channels, and sound cavity, you can experience the cinema sound at any time
18. Stability is relatively good, fan noise is small, almost silent
19. Top cover material: metal
20. Dimensions: 326x263x97mm
21. Weight: about 3.5kg

1. Projection technology: LCD
2.Original resolution: 800*480p
3. Brightness: 80 ANSI
4. LCD screen: 3.5 inch TFT LCD display
5. Light source: LED light source
6. Light source service life: 20,000-50,000 hours
7. Android System: Android 9, RK3228A
8. WiFi: 2.4G
9. Memory: 1G + 8G
10. Projection method: front projection / rear projection / ceiling projection
11. Projection size: 30-100 inches
12. Projection distance: 1.37-4m
13. Transmittance ratio: 1.37: 1
14. Projection ratio: 16:09 (16:10, 4:3)
15. Contrast ratio: 1500:1
16. Keystone Correction: Manual correction +/- 15 degrees
17. Focus: Manual focus
18. Language: Chinese, English
19. Video Format: MP4/RMAB/AVI/RM/MKV, etc.
20. Audio format: MP3/WMA/ACC, etc.
21. Image format: JPG / GIF / PNG, etc.
22. Interface: 1 * HDMI input, 1 * USB 2.0 input, 1 * AV input, 1 * headphone jack
23. Material: plastic
24. Size: 12.5x16.7x6.7 cm, Weight: 0.6 kg
25. Packing List: 1 * Projector, 1 * Manual, 1 * Remote Control, 1 * Power Adapter

1. Display Technology: LCD
2. Projection light source: LED module
3. The life of the projection light source: more than 30,000 hours
4. Central brightness: 100 ANSI Lumens
5. Light type: LED
6. Physical Resolution: 1920*1080 (Support 4K Film Source)
7. Projection size: 50-180 inches
9. Projection ratio: 1.35: 1
10. Uniformity: greater than 75%
11. Projection distance: 1.5 meters-3 meters
12. Projection ratio: 16:09
13. Focus mode: manual focus
14. Keystone Correction: Automatic Keystone Correction (Horizontal + Vertical: +/- 40 degrees)
15. Projection mode: front projection, rear projection, ceiling projection
16. System: Android 9
17. Solution: RK3229 4-Core, A7 Core, 1.2G
18. Processor: MALI400 MP2 GPU
19. Running Memory: 2 GB
20. Built-in storage: 16 GB
21. WiFi: 2.4G & 5G
22. Bluetooth: 4.0
23. Video Format: 4K HEVC, H.265, MPEG-2, MPEG-4, H.264, VP8, VP9
24. Music Format: MPEG1, Layer3, AC3, EAC3, AAC, HEAC, WMA, LPCM, IMA-ADPCM/MS-ADPCM
25. Image format: JPG, PNG, BMP, etc.
26. Remote control: Support infrared and 2.4G wireless remote control
27. Built-in speaker: 2x3w
28. Optical machine power consumption: 40W
29. Standby power consumption: 2.5W
30. Power consumption of the whole machine: 65W
31. Interface: HDMI X1, USB X1, DC input X1
32. Dimensions: 11x13.5x15cm
33. Net weight: 1.05 kg
34. Packing list: projector, infrared remote control, power cord, manual
35. Built-in battery 2600 mAh

1. Projection technology: 3LCD & DLP & LCD
2. Resolution: WVGA 854*480
3. Brightness: 100 Ansi Lumens
4. Light source: LED light source
5. Light source service life: 20,000-50,000 hours
6. Projection method: front projection / rear projection / ceiling projection
7. Projection size: 30-100 inches
8. Projection distance: 1-4 meters
9. Transmission: 1.19:1
10. Projection ratio: 16:09 (16:10/4:3)
11. Contrast ratio: 1500:1
12. Power consumption: 35 watts
13. Keystone Correction: Electrical Keystone Correction
14. Focus: manual
15. Speakers: 2 * 3 watt speakers
16. Video Format: VOB/MKV/MPG/MP4/MOV/AVI, etc.
17. Audio format: MP3/WAV/WMA, etc.
18. Image format: JPG/GIF/BMP/PNG, etc.
19. Interface: 1 * HDMI input, 1 * USB 2.0 input, 1 * DC 19V 3A
20. Material: plastic
21. Dimensions: 11x13.8x14cm
22. Weight: 0.9kg
23. Packing List: 1 * Projector, 1 * Manual, 1 * Remote Control, 1 * Power Adapter
24. Battery capacity: 2600 mAh

1. Projection technology: DLP
2. Display chip: 0.3 720p DMD + RAGBLED
3. Lamp brightness: 300 lumens
4. Light type: LED light
5. Brightness uniformity value: 90%
6. Contrast ratio: 4000:1
7.Standard resolution: WXGA 1280*720
8. Projection ratio: 1.2:1
9. Projection size range: 40-300 inches
10. Projection distance: 1-4 meters
11. Screen width ratio: 4:15/04:9/16:10
12. Keystone Correction: Automatic, Vertical: +/- 40 degrees
13. Focus mode: manual focus
14. Projection method: front projection
15. CPU: MSD6A628
16. Main frequency: MSD6A628 FREQUENCY MSD6A628 Main system 1.4G Android 6.0, A7 4-core processor, MALI450MP2 GPU, support DTMB / DVB-T / DVB-C, support Dual-Stream 3D decoding
17. Cache: 2G DDR3
18. Memory: 16G / 32G
19. Video Support: DAT, MPG, MPEG TS, TRP, TP VOB MPEG2, MPEG4, DIVX 3.11, DIVX 4.DIVX 5, DivX 6, XVID 1.00, XVID 1.01, XVID 1.02, XVID 1.03, XVID 1.10-beta1/2, H.264, RMVB, RM
20. Audio Support: MPEG1 Layer3 AC3 EAC3 AAC, HeaC WMA LPCM IMA-ADPCM/MS-ADPCM
21. Image support: JPG, PNG, BMP, etc.
22. Flash Support: Flash 11.1
23. Extended storage: Support 32G TF card and hard disk, support USB3.0 hard disk and USB3.0 USB3.0 disk
24. Bluetooth: BT 4.0
25. WiFi: 2.4G / 5G WiFi
26. Power amplifier: 2 x 2 watt speakers
27. Power input parameters: 19V-3.42A DC
28. Interface: 2 * USB, 1 * Headphone, 1 * HDMI input, 1 * 19V DC input
29. Power consumption of the whole machine: 23W
30. Whole machine power: normal mode: 23W, economy mode: 17w
31. Energy performance: AC100-240V, 50/60Hz, built-in 12000mAh battery
32. Product size: 172x40mm
33. Product weight: 0.69 kg

1. Display Technology: DLP (0.23 inch DMD)
2. Projection light source: RGB LED
3. The life of the projection light source: more than 10,000 hours
4. Brightness: 200 lumens
5. Light type: LED
6. Resolution: 1080p (1092x1080p), 4K support
7. Projection size: 40-300 inches
8. Contrast ratio: 1000:1
9. Projection ratio: 1.2:1
10. 3D mode: Support 3D shutter
11. Distortion: less than 1.26%
12. Uniformity: greater than 90%
13. Projection distance: 1m-8m
14. Projection aspect ratio: 4:15/11:9/16:10
15. Focus mode: Auto focus
16. Keystone Correction: Automatic, Vertical: +/- 40 degrees
17. Projection mode: front projection, rear projection, ceiling projection
18. SAME SCREEN CHIRNCING: ESHORE / AIRPLAY / Miracast
19. Schematic: RK3368
20. Base frequency: 8 cores, 64 bit, Ar53 Core, 1.5G
21. Processor: G6110 GPU
22. Running Memory: 2 GB DDR3
23. Built-in storage: 16 GB
24. WiFi: 2.4G/5G dual frequency, 802.11A/B/G/N AC
25. Bluetooth: BT5.0 (TBD)
26. Bluetooth audio mode: one-key switch, (the projector is on the screen, the projector can be used as Bluetooth audio)
27. Built-in battery capacity: 7.4V 4000mAh
28. Interface: HDMI X1, USB X2, 3.5 headphone output X1, DC 15V3A input
29. Unique cylindrical appearance, with touch module, can be operated by hand touch, remote control, mouse, etc.
30. Built-in battery, can last for 1.5 hours, built-in 3W speaker, experience high-quality music anytime, anywhere
31. The projection screen size can be adjusted by temperature, enlarge the same proportion, without moving the machine, you can directly use the remote control to operate
32. It can be set to Bluetooth speaker mode, the projector screen is off and the projector can be used as a Bluetooth speaker
33. The auto focus function is not only convenient to use, but also more technological, which solves the needs of users
34. With off-axis function, it can be positioned and observed at will
35. Android 7.1 system, with 2.4G/5G WiFi, can realize large-screen interaction with the same mobile phone, and can watch movies and play online games, etc.
36. Body size: 93x93x161mm
37. Net body weight: 0.9kg

1. Printing method: direct thermal line
2. Resolution: 200 DPI
3. Printing speed: 152mm(6)/s
4. Print width: 108mm (4.25)
5. Print length: 1778mm (70)
6. Central processing unit: 32-bit RISC CPU
7. Memory: 8MB Flash Memory / 8MB SDRAM / Micro SD Flash Flash memory card reader can expand the memory to 4GB
8. Communication interface: USB2.0 (Standard) / TF card (Standard) / Serial port (Optional) / WiFi (Optional) / Bluetooth (Optional)
9. Power specification: External universal switching power supply / input: AC 100-240V, 1A, 50-60Hz / output: DC 24V, 2.5A, 60W
10. Printer language: TSPL, EPL, ZPL, DPL
11. Media types: continuous paper, gap paper, folded paper, perforated paper, black mark paper
12. Average width: 25.4-118 mm (1 -4.6)
13. Media Thickness: 0.06-0.25mm (2.36-9.8mil)
14. Media core diameter: 25.4-76.2mm (1 - 3)
15.Label length: 10-1778mm (0.39-70)
16. Appearance dimensions: 219.03x189.62x178.50mm
17. Weight: 1.58 kg

1. Printing method: thermal printing
2. Resolution: 203 DPI
3. Printing speed: 152mm(6)/s
4. Print width: 108mm (4.25)
5. Print length: 1778mm (70)
6. Central processing unit: 32-bit RISC CPU
7. Memory: 8MB Flash Memory / 8MB SDRAM / Micro SD Flash Flash memory card reader can expand the memory to 4GB
8. Communication interface: USB2.0 (Standard) / TF card (optional) / Serial port (optional) / WiFi (optional) / Bluetooth (optional)
9. Power specification: External universal switching power supply / input: AC 100-240V, 1A, 50-60Hz / output: DC 24V, 2.5A, 60W
10. Printer language: TSPL, EPL, ZPL, DPL
11. Media types: continuous paper, gap paper, folded paper, perforated paper, black mark paper
12. Average width: 25.4-115mm (1-4.5)
13. Media Thickness: 0.06-0.25mm (2.36-9.8mil)
14. Media core diameter: 25.4-76.2mm (1 - 3)
15. Label length: 10 -1778mm (0.39 -70)
16. Appearance dimensions: 219.03x189.62x178.50mm
17. Weight: 1.4 kg

1. Material: Stainless steel
2. Bluetooth remote control for taking photos, easy to use
3. Hold your phone firmly, not easy to fall off
4. With fill light, making selfies more convenient
5. Not only a Selfie Stick, but also a cell phone holder
6. Dimensions: 49.5x33x152-750mm
7. Weight: 140 g

1. Material: Aluminum alloy
2. Bluetooth remote control for taking photos, easy to use
3. Hold your phone firmly, not easy to fall off
4. With fill light, making selfies more convenient
5. Not only a Selfie Stick, but also a cell phone holder
6. Dimensions: 49.5x33x152-704mm
7. Weight: 130g

1. Frequency range: 433MHz
2. Wireless transmission distance: 50-100m
3. Working voltage: DC3V (built-in one 2032 battery)
4. Working current: 10mA @ 3V
5. Radiation power: 10MW @ 3V
6. Encoder type: fixed code, learning code, partial rolling code
7. Mainly used for remote control of some cars. Remote Control Electric Retractable Doors, Elevators, Remote Control Barriers, Remote Control Swing Doors, Remote Control Rotating Doors, Garage Doors, Sliding Doors, Remote Control LED Lights, Remote Control Fire Equipment, Anteprocol, Remote Control Passenger Car Doors, Burglar Alarms, Electric Door Alarm, Motorcycle Burglar Alarm, etc.
8. Copyable chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT640D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211

1. Frequency range: 433MHz
2. Wireless transmission distance: 50-100m
3. Working voltage: DC3V (built-in one 2032 battery)
4. Working current: 10mA @ 3V
5. Radiation power: 10MW @ 3V
6. Encoder type: fixed code, learning code, partial rolling code
7. Mainly used for remote control of some cars. Remote Control Electric Retractable Doors, Elevators, Remote Control Barriers, Remote Control Swing Doors, Remote Control Rotating Doors, Garage Doors, Sliding Doors, Remote Control LED Lights, Remote Control Fire Equipment, Anteprocol, Remote Control Passenger Car Doors, Burglar Alarms, Electric Door Alarm, Motorcycle Burglar Alarm, etc.
8. Copyable chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers), HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT640D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908, 1416, 5211