Characteristics
1. Built-in three 18650 batteries, 7800mAh, voltage output up to 12.6V and stronger motor power (batteries not included).
2. Built-in S-8254AA + AO4407A lithium battery protection circuit, with anti-overcharge, anti-over-discharge, anti-over-current and short circuit protection functions.
3. The built-in APW7313 voltage regulator chip can provide a stable 5V voltage to the Jetson Nano.
4. Built-in TB6612FNG dual H-bridge motor driver chip can make the left and right motors work.
5. Built-in 0.91 inch OLED with 128 x 32 resolution, real-time display of car IP address, memory, power, etc.
6. Built-in ADS1115 AD acquisition chip is convenient for real-time monitoring of battery power.
List of packages
1. Jetson Nano 2GB Developer Kit
2. 64GB Micro SD Card
3. JetRacer 6 PCS Metal Kit
4. 2pcs EVA Felt Mat
5. 3D printed engine cover
6. JetRacer Expansion Card
7. IMX219-160 Camera
8. USB wireless network card
9. Acrylic piece
10. Servo support
11. Metal gear motor 2PCS
12. Tire 4 PCS
13. Coupler 2PCS
14. MG996R Servo Motor
15. MG996R Servowheel
16. Steering knuckle 2PCS
17. Ball bearing 4PCS
18. M3 Plastic Ball Joint 4pcs
19. M3 traction bar 2PCS
20. Charger 12.6V 2A + EU head
21. Wireless Gamepad
22. 6 pin cable
23. Key 2 PCS
24. Screwdriver 2 PCS
25. Mini cross wrench sleeve
26. Cooling fan 4010
27. Micro SD card reader
28. Screw pack
29. Track Map

Characteristics
The intelligent robot is a project of electronics enthusiasts and there have been several Raspberry Pi Zero W, 3B+, 4B based robots in the Waveshare product line. Now, here comes the Pico version: PicoGo!
PicoGo is an intelligent mobile robot based on Raspberry Pi Pico, it includes ultrasonic module, LCD module, Bluetooth module, line following module and obstacle avoidance module, all these functions are highly integrated to easily achieve IR obstacle avoidance, automatic line following, BT/IR remote control and more. With various advanced features, it will help you get started quickly with intelligent robot design and development.
Features of the PicoGo intelligent mobile robot:
1. Standard Raspberry Pi Pico header, support Raspberry Pi Pico series
2. Battery protection circuit: Overcharge/discharge protection, overcurrent protection, short circuit protection, reverse-proof, more stable and safe operation
3. Charging/discharging circuit, allows programming/debugging simultaneously while charging
4. 5-channel infrared sensor, analog output, combined with PID algorithm, stable line tracking
5. Built-in multiple intelligent robot sensors such as line tracking, obstacle avoidance, no more messy wiring
6. 1.14 inch IPS colorful LCD display, 240 x 135 pixels, 65,000 colors
7. Integrate BT module, enable remote operations such as robot movement, RGB LED display color, buzzer, etc. by using mobile phone APP
8. N20 micro gear motor, with metal gears, low noise, high precision
9. Colorful RGB LED, really cool!
Raspberry Pi Pico Controller Board Features:
1. RP2040 microcontroller chip designed by Raspberry Pi in the UK
2. Dual-core Arm Cortex M0+ processor, flexible clock up to 133 MHz
3. 264KB of SRAM and 2MB of onboard Flash memory
4. USB 1.1 with host and device support
5. Low-power sleep and dormancy modes
6. Drag-and-drop programming via USB mass storage
List of packages
1. Raspberry Pi Pico (pre-soldered header) x1
2. PicoGo x1 Base Board
3. PicoGo Acrylic Panel x1
4. 1.14 inch LCD module x1
5. Ultrasonic sensor x1
6. Power supply 5V 3A x1
7. IR remote control x1
8. USB-A to micro-B cable 1.2m x1
9. 5cm 8-pin PH2.0 cable with opposite side connectors x1
10. Mini cross wrench sleeve x1
11. Screwdriver x1
12. Screws and spacers pack x1

Product information
This is an AI Racing Robot kit based on the Jetson Nano Developer Kit. It supports deep learning, automatic line, autonomous driving and so on.
Specifications
1. Camera: 8MP HD resolution, 160 degree FOV wide angle camera
2. OLED: 0.91 inch 128 x 32 pixels
3.Wireless: AC8265
4. Drive type: Ackerman steering / rear-wheel drive with double gear motor
5. Power supply: 12.6V, 3 x 18650 batteries (connected in series). Note: 18650 batteries are NOT included.
6. Engine:
- 37-520 DC gear motor
- Reduction rate 1:10
- Idle speed 740 rpm
7. Frame: Aluminum alloy frame
8. Program library: JetRacer, DonkeyCar
9. Tip: Competition level; Programming experience required
List of packages
2. 2pcs EVA Felt Mat
3. 3D printed engine cover
4. JetRacer Expansion Card
5. IMX219-160 Camera
6. Wireless-AC8265
7. Acrylic piece
8. Servo support
9. Metal gear motor 2PCS
10. Tire 4 PCS
11. Coupler 2PCS
12. MG996R Servo Motor
13. MG996R Servowheel
14. Steering knuckle 2PCS
15. Ball bearing 4PCS
16. M3 plastic ball joint 4pcs
17. M3 pull rod 2PCS
18. 12.6V charger + EU head
19. Wireless Gamepad
20. 6 pin cable
21. Key 2 PCS
22. Screwdriver 2 PCS
23. Mini cross wrench sleeve
24. Cooling fan 4010
25. Micro SD card reader
26. Screw pack
27. Track Map

Characteristics
The Compute Module PoE board is a development board that can connect a Raspberry Pi compute module and utilize the resources of Pi more flexibly. With PoE (Power over Ethernet) function and integrated versatile peripheral interfaces, it is suitable for evaluating Raspberry Pi compute module, also it is an ideal choice for end products.
1. Raspberry Pi GPIO header, for connecting various types of Raspberry Pi HATs.
2. 10/100M Ethernet port with auto-negotiation, with PoE enabled.
3. 4 USB ports, allowing you to connect more USB devices.
4. 2 CSI camera interfaces.
5. Built-in HDMI/DSI interfaces for connecting displays.
6. Built-in USB TO UART, for serial debugging.
7. Cooling fan interface, auto run when power on Or controlled by IO pin.
8. Adopt isolated SMPS (switching mode power supply).
Specifications
1. Power: Micro USB port / PoE Ethernet port
2. PoE power input: 37V ~ 57V DC in
3. PoE power output: DC output 5V 2.5A
4. Operating temperature: -25 degrees C ~ 80 degrees C
5. Network standard: 802.3af PoE standard
6. Dimensions: 144mm x 88mm
7. Mounting hole size: 3.2mm

Characteristics
1. Build a shiny mini computer with this discreet aluminum case custom-made for the Raspberry Pi 4
2. Stylish Aluminum Alloy Housing: Aluminum housing with modern space gray finish, sturdy and beautiful
3. Removable top and GPIO recess: The neat GPIO recess and removable magnetic top are both beautiful and protective, and there are also clear pin labels and color-coded headers for ease of use.
4. "Always On" function: automatically starts the Pi and runs the fan when powered on, enabled via jumper
5. Amazing Temperature Management: The extended riser makes the aluminum case a great heat sink to transfer heat from the card, combined with a cooling fan and multiple vents, the cooling can't be better
6. Clean cable management: All ports are accessible from the back, minimizing cable clutter
7. Convenient and Safe Power Button: The dedicated power button, combined with a one-line script, turns on/off your computer while keeping your stored files safe, and also supports customized functions.
8. Easy to assemble, no messy lines: Comes with two PCB boards, easy to build, no messy lines, no misconnections, more stable and safer
9. Proper bottom design: TF card slot on the bottom, plus two vents and four rubber feet

Product information
The PI4-CASE-ARGON-ONE-M.2 metal case can greatly accelerate the boot and storage speed of the Raspberry Pi, that is, extend the M.2 interface through the USB interface and use an external SSD as the main storage for travel. In this case, the Raspberry Pi 4 can be booted through the USB interface, which greatly improves the read and write speed and makes the boot speed much faster than using the SD card.
Characteristics
1. Aluminum alloy material, modern space gray finish, sturdy and good looking
2. Magnetic Design: Removable magnetic top and well-designed GPIO header
3. M.2 expansion slot: Supports M.2 modules such as M.2 SSD, which is then connected to the Pi adapter via USB
4. Active + Passive Cooling: The entire top of the case acts as passive cooling for the Raspberry Pi, combined with the included cooling fan and multiple vents for airflow, provides excellent cooling effect.
5. Neat cable management: All ports are accessible on the back, minimal cable clutter
6. Appropriate bottom design: two air vents and four anti-slip feet, simple but useful
7. Easy assembly: only a few steps are needed, no messy wiring, no wrong connection, more stable, more secure

Features
1. 13.3 inch IPS screen,1920 x 1080 high resolution.
2. Embed Raspberry Pi 3A+ as controller.
3. Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch.
4. Embedded ferrite Hi-Fi speaker.
5. Embedded microphone and speaker, adopts snowboy hotword detection engine.
6. 75x75mm spacing mounting holes (M4 screw hole).
7. Comes with a 75 degree tilt angle stand.

Package List
1. 13.3 inch PiPad x 1
2. 12V power adapter x 1
3. Card reader x 1
4. Micro SD card x 1

Characteristics
1. 13.3 inch IPS screen, 1920 x 1080 high resolution.
2. Incorporate Raspberry Pi 3A+ as controller
3. One-way mirror, can display news, weather and time.
4. Tempered glass capacitive touch panel, 6H hardness, supports up to 10 points touch.
5. Built-in ferrite Hi-Fi speaker.
6. Built-in microphone and speaker, adopt Snowboy Hotword detection engine.
7. Mounting holes with 75 x 75mm spacing (M4 screw hole) for general wall mounting.
8. Comes with a 75 degree tilt angle stand.
List of packages
1. 13.3 inch magic mirror x 1
2. 12V Power Adapter x 1
3. Card reader x 1
4. Micro SD card x 1

Characteristics
This is a RS485 IoT gateway/data acquisition device designed for industrial environment. It combines multiple functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame retardant case design, small size, easy to install. It is suitable for applications such as data acquisition, IoT gateway, IoT safety and security, and intelligent instrument monitoring.
Specifications
Scheme:
1. Communication interface: RS485, screw terminal
2. Power supply: 5~36V DC, screw terminal
3. Case: PC+ABS, V0 flame retardant grade
4. Dimensions: W x D x H: 109.66 x 28 x 64.71 mm
Communication:
1. Ethernet: 10/100M auto-negotiation RJ45 connector
2. WIFI: 802.11b/g/n compliant
3. Serial port: RS485 interface (overcurrent, lightning, overcurrent protection)
Wireless Specifications:
1. Frequency band: 2.412~2.484GHz
2. Wireless network: Station/AP/AP+Station mode
3. Security mechanism: WPA-PSK / WPA2-PSK
4. Encryption type: TKIP / AES
5. Transmission power:
- 802.11b: +19dBm (11Mbps)
- 802.11g: +18dBm (54Mbps)
- 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7)
6. Sensitivity reception:
- 802.11b: -89dBm (11Mbps)
-802.11g: -81dBm (54Mbps)
- 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7)
Serial Specifications:
1. Baud rate: 300 ~ 460800 bps
2. Parity bits: none, odd, even, sign, space
3. Data bit: 5 ~ 9 bit
4. Flow Control: N/A
Software
1. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT
2. Configuration: Host, Web Browser, Serial AT Command
3. Communication method: TCP/IP direct communication, VCOM
4. Operation mode: Transparent transmission, serial command, HTTPD client, Modbus TCP to Modbus RTU
Environmental requirements
1. Working temperature: -40 ~ 85 degrees C
2. Storage temperature: -45 ~ 125 degrees C
3. Humidity range: 5% ~ 95% RH
List of packages
1. RS485 TO WIFI/ETH x 1
2. Antenna x 1

Characteristics
1. 7.9 inch IPS display with capacitive touch panel, the hardware resolution is 400x1280.
2. Capacitive touch, support up to 5 points touch.
3. Tempered glass capacitive touch panel, 6H hardness.
4. DSI interface, refresh rate up to 60Hz.
5. Working with Raspberry Pi, we provide the driver for Raspberry Pi operating system.
6. Brightness is adjustable via software.
7. Support Pi 4B/3B+/3A+, CM3+/4, need to use with adapter cable.
List of packages
1. 7.9 inch DSI LCD x 1
2. FPC 15PIN 1.0 50mm pitch (opposite sides) x 2
3. Screw pack x 1

Characteristics
1. 11.9 inch IPS screen, 320 x1480 high resolution
2. Tempered glass capacitive touch panel, 6H hardness.
3. Capacitive touch, support up to 5 points touch.
4. Working with Raspberry Pi, we provide the driver for Raspberry Pi operating system.
5. Brightness adjustable via software
6. DSI interface, refresh rate up to 60Hz.
7. Support Pi 4B/3B+/3A+, CM3+/4, need to use with adapter cable
List of packages
1. 11.9 inch DSI LCD x 1
2. FPC 15PIN 1.0 50mm pitch (opposite sides) x 2
3. Screw pack x 1

Specifications
1. CM4 Socket: Available on all Compute Module 4 variants
2. Network: RJ45 Gigabit Ethernet connector, 100M Ethernet RJ45 connector
3. USB: USB 2.0 Type-A x 2
4. Connector: Isolated RS485 x 4, Power screw terminal x 1
5. Camera: MIPI CSI-2 x 2 port (1.0mm 15-pin FPC connector)
6. Video: HD-MI interface x 1, support 4K 30fps output
7. RTC: Real-time clock with battery power and ability to activate the computing module 4
8. Storage: MicroSD card slot for the Compute Module 4 Lite variant (without eMMC).
9. Fan head: Allows speed adjustment, 5V
10. Indicator: Power indicator x 1, CM4 status indicator x 1,
User LED x 2, RS485 communication indicator x 8
11. Power input: 7-36V
12. Dimensions: 123 x 98 x 32 mm
List of packages
1. CM4-ETH-RS485-BASE-B x 1
2. Metal case (upper and lower) x 1
3. Fan x 1
4. Power supply 12V 2A x 1
5. Screwdriver x 1
6. Antenna connector rubber plug x 1
7. Screw pack x 1

1. Zero can be easily connected via specially designed connectors
2. Easily compatible with Raspberry Pi 3B / 3B+ board interfaces
3. Same height as 3B GPIO header, easily connect with 3B series HAT or development projects
4. Built-in 4-channel USB ports, compatible with USB 2.0 / 1.1 transmission
5. Built-in RTL8152B Ethernet chip, support 1-channel RJ45 Ethernet port, 10/100M adaptive

1. Built-in standard CM4 connector, support CM4 Lite/eMMc series card access with 64-bit Quad Core Cortex A72 processor, more powerful performance
2. Easily compatible with Raspberry Pi 3B / 3B+ board interfaces
3. Built-in headphone jack (extended by USB)
4. Built-in 4-channel USB ports, compatible with USB 2.0 / 1.1 transmission
5. Built-in RJ45 Gigabit Ethernet port, 10/100/1000M adaptive
6. Built-in PoE header, for connecting PoE HATs

Functionality
1. Poe UPS Base for CM4: Uninterruptible power supply, powering the CM4 while charging
2. Connection with compute module 4: Standard CM4 socket and Raspberry PI 40pin GPIO header. Suitable for compute module 4 lite/EMMC Module
3. Uninterrupted Power: It can charge the batteries and provide power output for the system simultaneously from the external power supply. Automatically switch to battery output If the external power supply is not available, it keeps the system running smoothly
4. Multiple Power Options:
- Three external power options: USB interface, wide voltage DC and POE
- When connected to external power, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected state after being fully charged, so as to avoid the damage to battery life caused by frequent charging and discharging
- When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure the normal operation of the system
- When external power is connected, the system will continue to work normally even when the battery fails or is removed. When external power is disconnected, it will automatically switch to battery output without interrupting the system operation
5. Safe and stable circuit design: Overload/discharge, overvoltage, short circuit and reverse-proof protection circuits
Together with independent resettable fuse for each battery, more safe and stable
6. Real-time monitoring: Monitoring battery voltage, current, power and remaining capacity via I2C. (When the voltage is too low, you can save the files properly and then shut down the system by software, to avoid any data loss)
Note: 18650 batteries are not included
Specifications
1. CM4 Company: Suitable for all variants of the calculation module 4
2. Battery support: Parallel 18650 lithium battery x 3 (not included)
3. Networking: RJ45 Gigabit Ethernet connector, integrates 802.3AF compliant POE circuit (5V/2.5A)
4. USB: USB 2.0 Type A ?? 4
5. Connector:
- Raspberry Pi 40pin GPIO header
- M.2 M key slot, for connecting NVME SSD or communication module with M.2 M key interface
6. Display: MIPI DSI Port X 1 (22pin 0.5mm FPC connector)
7. Camera: MIPI CSI-2 X 2 port (22pin 0.5mm FPC connector)
8. Video: HDMI X 2, supports 4K 30fps output
9. RTC: Real-time clock with battery socket and ability to wake up the computing module 4
10. Storage: microSD card socket for the Compute Module 4 lite (without EMMC) variants
11. Fan: Allows speed adjustment and measurement, 5V / 12V
12. Indicator:
- M.2 status LED
- CM4 status LED
13. Power input7-36V
14. Dimensions: 175.0 x 108.0 mm

1. 1MP, Global Shutter, 120 Degree Fov, OV9281-120 Mono Camera, Compatible with Raspberry PI series boards
2. Global shutter eliminates the jello effect when shooting fast-moving objects, more suitable for high frame rate acquisition
3. Working with Raspberry Pi, Directly connect to Raspberry Pi Different variants including 4b / 3b+ / 3a+ / 3b / 2b / b+ / a+, the extra FPC cable is balanced for zero / zero 2w series
Specifications:
1. Sensor: OV9281
2. CMOS size: 1/4 inch
3. Camera type: mono
4. Pixels: 1MP (1280 x 800)
5. Shutter: Global shot
6. Aperture: F2.5
7. Speeches: less than 7.5%
8. Field of Views: 120 degrees
9. Focal length: 3.15mm
10. Focusing: fixed focus
Package List:
1. OV9281-120 Camera x 1
2. 15-pin FFC (Opposite Sides Contact) x 1

Features
The WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating tasks for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating.

1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque
2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating tasks for the host controller and improving the gait solving efficiency
3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight
4. Additional Raspberry Pi can be attached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.

Specifications
General:
1. Product name: WAVEGO high-DOF bionic quadruped robot
2. Stand up: length 218mm, width 116mm, height 152mm
3. Lie down: length 228mm, width 116mm, height 127mm
4. Overall weight: 554g (with batteries)
5. DOF: 12 overall, 3 for single leg

Operating system:
Demo code: FreeRTOS + Raspberry Pi OS

Motion performance:
1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait, jump, self-balancing
2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function
3. Load: 200g

Servant info.:
1. Dimensions: 23.2 x12.1 x25.25 mm
2.Weight: 13.0 +/- 1g
3.Operating voltage: 6V
4.Idle speed: 0.1sec/60 degree (100RPM)
5. Stalling torque: 2.3kg.cm (31.99oz.in)
6. Rated load: 0.7kg.cm
7. Rated current: 350mA
8. Control method: Pulse width modification
9. Control system type: Digital comparator

Visual function:
1. FreeRTOS demo: Web-based real time video streaming
2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection
Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV

Processor and memory:
1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz
2. SRAM: 520KB+8MB
3. Flash: 448KB+4MB

Others:
1. WiFi standard: 802.11b/g/n
2. Standard Bluetooth: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE)
3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.)
4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion)

Power supply:
1. Battery type: 18650 Li-ion batteries (NOT included)
2.Power supply voltage: 7-8.4V
3. Charging voltage: 8.4V
4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating
5. Output voltage: provides 5V output for other host controller

Package List
1. WAVEGO body case x 1
2. WAVEGO basic parts x 1
3. Semi-transparent acrylic panel x 1
4. Double-sided sticker x 1
5. WAVEGO base board x 1
6. 2MP camera x 1
7. 2.4G antenna x 1
8. 0.91inch OLED display x 1
9. Micro thrust bearing x 14
10. Micro ball flange bearing x 30
11. USB cable (~1m) x 1
12. Plus screwdriver x 1
13. Cross wrench sleeve x 1
14. IPEX 1 to SMA cable (~17cm) x 1
15. Jumper wire (~20cm) x 4
16. 4 PIN PH2.0 cable x 1
17. Servo pack x 1
18. 8.4V 2A battery charger x 1
19. Screws and standoffs x 1

Features
The WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large torque servos, reliable structure, and flexible motion, incorporating devices like front camera, 9-axes motion tracker, RGB indicator, etc., together with open source multi-platform Web application. It uses the ESP32 as sub controller for connecting rod inverse solving and gait generation, sharing calculating tasks for the host controller, an additional Raspberry Pi can be attached as the host controller for high-level decision operating.

1. Overall 12-DOF, multi connecting rods leg design, increasing the servo effective torque
2. A real time operating system is used as sub controller for connecting rod inverse solving and gait generation, sharing calculating tasks for the host controller and improving the gait solving efficiency
3. Ultra compact structure design, allows using on the table, aluminum alloy + nylon structure materials, ensuring strength while keeping it light weight
4. Additional Raspberry Pi can be attached as the host controller to enable OpenCV high-level functions, demo codes including facial recognition, motion detection, color tracking, and more. Reserved extension interface for secondary development, along with user manual and secondary development documents.

Specifications
General:
1. Product name: WAVEGO high-DOF bionic quadruped robot
2. Stand up: length 218mm, width 116mm, height 152mm
3. Lie down: length 228mm, width 116mm, height 127mm
4. Overall weight: 465g (with batteries)
5. DOF: 12 overall, 3 for single leg

Operating system:
Demo code: FreeRTOS + Raspberry Pi OS

Motion performance:
1. Available gait: Shake hands, stand up, crouch slowly, diagonal gait, jump, self-balancing
2. Motion extension: Providing motion programming example, including flexible Bezier curve speed motion function
3. Load: 300g

Servant info.:
1. Dimensions: 23.2 x12.1 x25.25 mm
2.Weight: 13.0 +/- 1g
3.Operating voltage: 6V
4.Idle speed: 0.1sec/60 degree (100RPM)
5. Stalling torque: 2.3kg.cm (31.99oz.in)
6. Rated load: 0.7kg.cm
7. Rated current: 350mA
8. Control method: Pulse width modification
9. Control system type: Digital comparator

Visual function:
1. FreeRTOS demo: Web-based real time video streaming
2. Raspberry Pi OS demo: Real time video streaming, facial recognition, color tracking, moving object detection
Note: All the demo codes are open sourced, the Raspberry Pi OS demo is based on open source projects flask-streaming and OpenCV

Processor and memory:
1. ESP32 sub controller: Processor: Xtensa LX6 dual-core processor 240MHz
2. SRAM: 520KB+8MB
3. Flash: 448KB+4MB

Others:
1. WiFi standard: 802.11b/g/n
2. Standard Bluetooth: Bluetooth 4.2, including traditional Bluetooth (BR/EDR) and Bluetooth low energy (BLE)
3. External port: 2 x 5P multi-function extension port (host controller communication, power supply selection, assembly mode selection, etc.)
4. DC battery charger jack: Type-C (download, UART communication, peripheral expansion)

Power supply:
1. Battery type: 18650 Li-ion batteries (NOT included)
2.Power supply voltage: 7-8.4V
3. Charging voltage: 8.4V
4. Protection: Over charge, discharge protection, over current protection, short circuit protection, reverse proof, equalizing charge, stable and safe operating
5. Output voltage: provides 5V output for other host controller

Package List
1. WAVEGO body case x 1
2. WAVEGO basic parts x 1
3. Semi-transparent acrylic panel x 1
4. Double-sided sticker x 1
5. WAVEGO base board x 1
6. 2MP camera x 1
7. 2.4G antenna x 1
8. 0.91 inch OLED display x 1
9. Micro thrust bearing x 14
10. Micro ball flange bearing x30
11. USB cable (~1m) x 1
12. Plus screwdriver x 1
13. Cross wrench sleeve x 1
14. IPEX 1 to SMA cable (~17cm) x 1
15. Jumper wire (~20cm) x4
16. 4PIN PH2.0 cable x 1
17. Servo pack x 1
18. 8.4V 2A battery charger x 1
19. Screws and standoffs x 1

Functionality
1. 13.3 inch IPS screen, 1920x1080 high resolution
2. 6h tempered glass capacitive touch panel, 10 points touch
3. Raspberry Pi Powered Mini-Computer CM4
4. Powerful Controller: Raspberry Pi CM4; Not just a simple display, with powerful Raspberry Pi CM4 (CM4104000) inside
5. Multiple OS support: Raspberry Pi OS / Ubuntu / Kali / Win10 IoT / RETROPIE
6. Multi-language OSD menu, for power management, brightness/contrast adjustment, etc.
7. With USB/ETH port, 3.5mm audio jack, built-in hi-fi speaker
8. It could be a Raspberry Pi tablet: Enjoy this Raspberry Pi tablet, watch movies, listen to music
9. Also a mini desktop computer: Transform into a mini computer in 1s for study/work, just connect wireless mouse and keyboard
10. High-speed networking: Support Gigabit Ethernet and 2.4GHz/5GHz WiFi High-speed Internet connection, support Bluetooth5.0
List of packages
1. 13.3 inch PI-pad C4 x 1
2. Rear stand x 1
3. 2.4G/5G WiFi Antenna x 1
4. 12V 1A Power Supply X 1
5. Screwdriver x 1
6. CM4104000 x 1
7. Micro SD Card X 1 16GB
8. Card reader x 1

1. Design with good heat dissipation, no need to install cooling fan or heat sink.
2. This case is constructed with high quality aluminum material.
3. Only suitable for Raspberry Pi 4
4. Access to all ports on Raspberry Pi 4
5. The cable interface is reserved, support to install the cable.
Note: Please insert the micro SD card into Raspberry Pi before installing the case.

1. Design with good heat dissipation, no need to install cooling fan or heat sink.
2. This case is constructed with high quality aluminum material.
3. Only suitable for Raspberry Pi 4
4. Access to all ports on Raspberry Pi 4
5. The cable interface is reserved, support to install the cable.
Note: Please insert the micro SD card into Raspberry Pi before installing the case.

1. Suitable for evaluating the Raspberry Pi CM4 or integrating into end products
2. Standard CM4 socket, 40pin GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm audio jack...
3. All in the compact body just like the size of CM4
Specifications:
1. CM4 Company: Suitable for all variants of the calculation module 4
2. Networking: Gigabit Ethernet RJ45 connector
3. Connector: Raspberry Pi 40Pin GPIO Header x 1
4. USB: USB 2.0 Type A Connector X 1
5. Display: MIPI DSI Port X 1 (1.0mm 15pin FPC connector)
6. Camera: MIPI CSI-2 X 1 port (1.0mm 15pin FPC connector)
7. Video: Mini HDMI Port x 1, supports 4K 30fps output
8. Audio: 3.5mm jack
9. Storage: Micro SD card socket for the Compute Module 4 lite (without EMMC) variants
10. Power input: 5V
11. Size: 56 x 41mm
Package List:
1. CM4-Nano-B X 1
3. 2**20pin color coding Pinestar x 1

Functionality
1. Comes with RM500U-CN core module, supports 5G and LTE-A multi-network types, supports 5G NSA and SA network
2. Integrate extensive network protocols, with multiple drivers and software support, compatible with different operating system including Windows / Linux / Android
3. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi or Jetson Nano Host Board to enable high-speed 5G communication
4. Standard M.2 B key slot, compatible with various 5G modules: RM500U-CN / RM500Q-CN / RM500Q-GL series
5. UART control pins, PWR and RST, built-in voltage level translator, enabled via DIP switch, for use with hosts such as Raspberry Pi or Arduino
6. Onboard switch-enabled USB-C connector for connecting the module's standalone power supply enables multiple loads, flexible AMD stable AMD power supply
7. On-board power supply Switch Off Switch, reset button and LED indicator, easy to turn on/off the module or monitor the working status
8. 2X SIM card slot, SINGLE STATE TWO CARDS, SPATMERABLE AT
9. High efficiency power circuit, up to 3A output current
Specifications
Frequency band:
1. 5G:
- 5G NR: 3GPP Release 15 NSA/SA Operation, Sub-6 GHz
- 5G NR NSA: N41, N78, N79
- 5G NR SA: N1, N28, N41, N77, N78, N79
- Downlink: 4 x 4 MIMO N1, N41, N77, N78, N79
2. LTE:
- LTE Category: Downlink Cat 12, Uplink Cat 13
- LTE-FDD: B1, B2, B3, B5, B7, B8, B20, B28
- LTE-TDD: B34, B38, B39, B40, B41
- Downlink 2 x 2 MIMO: B1, B2, B3, B5, B7, B8, B20, B28, B34, B38, B39, B40, B41
3. UMTS: WCDMA: B1, B2, B5, B8
Data Rate:
1. 5G SA sub-6: downlink 2Gbps; Uplink 1 Gbps
2. 5G NSA SUB-6: downlink 2.2Gbps; Uplink 575 Mbps
3. LTE: downlink 600Mbps; uplink 150Mbps
4. UMTS: downlink 42.2Mbps; uplink 11Mbps
Other:
1. Operating temperature: -30 degrees C ~ +75 degrees C
2. Extension temperature: -40 degrees C ~ +85 degrees C
3. Module size: 30.0 x 52.0 x 2.3 (mm)
4. Module weight: 8.9 (G)
List of packages
1. M.2 to 4G/5G HAT x 1
2. RM500U-CN X 1
3. Antenna 4pcs x 1
4. IPEX adapter cable 4pcs x 1
5. 2**20pin Pin Header x 1
6. 5V 3A Type-C Power Adapter x 1
7. USB3.0 Dual Plug Cable X 1
8. USB3.0 adapter x 1
9. USB2.0 adapter x 1
10. SMA protective cap 4pcs x 1
11. Screw pack x 1

Functionality
1. This is a Raspberry PI 4G/3G/2G communication hat with GNSS positioning and high-speed LTE Cat4 global band connection. By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable 4G high-speed networking, cloud platform communication, phone calls/SMS and global GNSS positioning functions.
2. Support dial-up, phone call, SMS, TCP, UDP, MQTT, HTTP(S), FTP(S) and so on
3. GNSS positioning: GPS, BEIDOU, GLONASS, GALILEO, QZSS, LBS base station
4. USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi or Jetson Nano Host Board to enable high-speed 4G communication
5. UART control pins, PWR and RST, built-in voltage level translator, enabled via DIP switch, for use with hosts such as Raspberry Pi or Arduino
7. Onboard switch-enabled USB-C connector for connecting the module's standalone power supply enables multiple loads, flexible AMD stable AMD power supply
8. On-board power supply Switch Off Switch, reset button and LED indicator, easy to turn on/off the module or monitor the working status
9. 4x SMA antenna interfaces reserved for iPEX, with 2x pre-soldered connectors for easily using antennas, allows you to change the position of the SMA antenna
10. Onboard audio jack and audio decoder, enables audio operation like making phone call
11. High efficiency power circuit, up to 3A output current
Specifications
Frequency band:
1. LTE CAT-4: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
2. LTE-TDD: B34, B38, B39, B40, B41
3. 3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
4. 2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
GNSS:
1. Satellite systems: GPS, Beidou, Glonass, Galileo, QZSS
2. Receiver type:
- 16-channel
- C/A Code
3. Sensitivity:
--159 dbm (GPS) / -158 dbm (glonass) / tbd (beidou)
- Cold start: -148 dbm
4. Time-to-First-Fix (opening):
- Cold start: less than 35 seconds
- Starts hot: less than 1s
SMS and audio
1. SMS:
- Supported types: MT, MO, CB, text, PDU
- Storage: USIM Card and Me (default)
2. Audio function:
- Support echo cancellation
- Support noise reduction
List of packages
1. M.2 to 4G/5G HAT x 1
2. SIM7600G-HM.2 x 1
3. Antenna 2pcs x 1
4. IPEX adapter cable 2pcs x 1
5. 2**20pin Pin Header x 1
6. Passive GPS antenna x 1
7. USB3.0 Dual Plug Cable X 1
8. USB3.0 adapter x 1
9. USB2.0 adapter x 1
10. SMA protective cap 2pcs x 1
11. Screw pack x 1

1. Sensor: IMX378
2. CMOS size: 1/2.3 inch
3. Camera type: Color pixels: 12.3MP (4056 x 3040)
4. Shutter: Rolling Shutter
5. Aperture: F2.4
6. Distortion: less than 58%
7. Field of Views: 190 degrees
8. Focal length: 6.5mm
8. Concentration: Fixed focus distance

1. Pixels: 5MP
2. Sensor: OV5640
3. Interface: USB 2.0
4. Camera: Sensor size 1/4 inch
5. Aperture (F): 2.8
6. Focal length (EFL): 3.29mm
7. Field of View (FOV): 68 degrees
8. Distortion: less than 1%
9. Focusing (C): FF Fixe-Focus
10. Image format support: MJPG, YUV422
11. Static image resolution: 2592 x 1944
12. Video Recording: 15fps 2592x1944, 30fps 1920x1080, 30fps 1280x720
13. Operating voltage: 5V +/- 5%
14. Camera size: 8.5 x 8.5mm
15. Module size: 9 x 62 mm

1. Pixels: 5MP
2. Sensor: OV5640
3. Interface: USB 2.0
4. Camera: Sensor size 1/4 inch
5. Aperture (F): 2.8
6. Focal length (EFL): 3.29mm
7. Field of View (FOV): 68 degrees
8. Distortion: less than 1%
9. Focusing (B): Auto-Focus AF;
10. Image format support: MJPG, YUV422
11. Static image resolution: 2592 x 1944
12. Video Recording: 15fps 2592x1944, 30fps 1920x1080, 30fps 1280x720
13. Operating voltage: 5V +/- 5%
14. Camera size: 8.5 x 8.5mm
15. Module size: 9 x 62 mm