Prodotto selezionato
Waveshare 23949, FT232RL and SP485EEN, USB to RS485/422 Isolated Converter
€19,70
Disponibile
Characteristics: 1. Original FT232RL and SP485EEN chip on board; fast, stable and reliable communication speed, better compatibility 2. Built-in power isolation on board, providing stable isolation voltage, no additional power supply is needed at the...
Pagamenti sicuri
Acquista con metodi di pagamento protetti.
Spedizione tracciata
Segui il tuo ordine dopo l’acquisto.
Assistenza clienti
Supporto disponibile per informazioni sul prodotto.
Descrizione prodotto
Characteristics:
1. Original FT232RL and SP485EEN chip on board; fast, stable and reliable communication speed, better compatibility
2. Built-in power isolation on board, providing stable isolation voltage, no additional power supply is needed at the isolation end
3. Built-in on-board digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
4. Built-in TVS (transient voltage suppressor), effectively suppresses overvoltage and transient peak voltage in the circuit, lightning protection and anti-static
5. Built-in automatic recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection and improve shock resistance
6. Built-in 15KV ESD isolation protection and 600W lightning surge protection
7. The RS485/RS422 interface has an onboard 120R terminating resistor, which is enabled by default and can be configured via jumpers
8. 3 LEDs to indicate power and transceiver status
9. Industrial grade railway type ABS shell design, small size, easy installation, high cost performance
Product parameters:
1. Transmission speed: FT232RNL (300bps-3Mbps)
2. Host port: USB
3. Device port: RS485/422
4. Working voltage: 5V
5. Connector: USB-B
6. Protection: 200mA resettable fuse, ESD protection
7. Transmission distance: about 5m
8. Connector: Screw terminal
9. Pin: A+, B-, PE
10. Direction Control: Automatic Hardware Control
11. Protection: 600W lightning protection, 15KV ESD protection (120R balancing resistor on board)
12. Transmission distance: about 1.2km (low speed)
13. Transmission method: Point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
14. LED indicator: PWR: red power indicator, it is on when there is USB connection and voltage is detected; TXD: green TX light, it is on when the USB port is sending data; RXD: blue RX light, when the device port is sending data it lights up
15. Working environment temperature: minus 15-70 degrees Celsius
16. Humidity: 5% -95% RH
17. Operating System: Mac, Linux, Android, WinCE, Windows 10/8.1/8/7/XP
18. Shell: Rail type ABS shell, suitable for 35mm DIN rail
19. Product size: 81.9 × 54.0 × 32.0 mm
20. Weight: 104 grams
Packing list:
-USB to RS485/422 x 1
-1.2m USB-A to USB-B Cable x 1
-Screwdriver x 1
1. Original FT232RL and SP485EEN chip on board; fast, stable and reliable communication speed, better compatibility
2. Built-in power isolation on board, providing stable isolation voltage, no additional power supply is needed at the isolation end
3. Built-in on-board digital isolation, signal isolation, high reliability, strong anti-interference, low power consumption
4. Built-in TVS (transient voltage suppressor), effectively suppresses overvoltage and transient peak voltage in the circuit, lightning protection and anti-static
5. Built-in automatic recovery fuse and protection diode to ensure stable current/voltage output, provide over-current/over-voltage protection and improve shock resistance
6. Built-in 15KV ESD isolation protection and 600W lightning surge protection
7. The RS485/RS422 interface has an onboard 120R terminating resistor, which is enabled by default and can be configured via jumpers
8. 3 LEDs to indicate power and transceiver status
9. Industrial grade railway type ABS shell design, small size, easy installation, high cost performance
Product parameters:
1. Transmission speed: FT232RNL (300bps-3Mbps)
2. Host port: USB
3. Device port: RS485/422
4. Working voltage: 5V
5. Connector: USB-B
6. Protection: 200mA resettable fuse, ESD protection
7. Transmission distance: about 5m
8. Connector: Screw terminal
9. Pin: A+, B-, PE
10. Direction Control: Automatic Hardware Control
11. Protection: 600W lightning protection, 15KV ESD protection (120R balancing resistor on board)
12. Transmission distance: about 1.2km (low speed)
13. Transmission method: Point-to-multipoint (MAX32 nodes, repeaters are recommended for more than 16 nodes)
14. LED indicator: PWR: red power indicator, it is on when there is USB connection and voltage is detected; TXD: green TX light, it is on when the USB port is sending data; RXD: blue RX light, when the device port is sending data it lights up
15. Working environment temperature: minus 15-70 degrees Celsius
16. Humidity: 5% -95% RH
17. Operating System: Mac, Linux, Android, WinCE, Windows 10/8.1/8/7/XP
18. Shell: Rail type ABS shell, suitable for 35mm DIN rail
19. Product size: 81.9 × 54.0 × 32.0 mm
20. Weight: 104 grams
Packing list:
-USB to RS485/422 x 1
-1.2m USB-A to USB-B Cable x 1
-Screwdriver x 1
Size:
| package weight |
|